Dynex DX-WD1239 - Manuals - manualsarea.com

Page 3 - Package contents: hardware

3 DX-WD1239 Need help? Call 800-305-2204 Package co ntents Package contents: hardware Make sure you have all the hardware necessary to assemble your new TV cart: Using a screw that is too long will cause damage your TV cart. Before beginning assembly, separate each type of screw. Carefully study the...

Page 4 - Package contents: parts; All parts except for the stop molding (; Letter

4 DX-WD1239 Need help? Call 800-305-2204 Package contents: parts Note: All parts except for the stop molding ( H ) have a lettered sticker to make identifying parts easier. Letter Description Qty. Letter Description Qty. A Right end 1 E Bottom 1 B Left end 1 F Adjustable shelf 1 C Upright 1 G Valanc...

Page 5 - and; Do not tighten the hidden cams in this step.; Arrow

5 DX-WD1239 Need help? Call 800-305-2204 As sembly instr uc tions Step1: Assemble your TV cart on a carpeted floor or on the empty carton to avoid scratching your TV cart or the floor.Push nine hidden cams ( I2 ) into the ends ( A and B ), upright ( C ), and top ( D ), then insert the metal end of a...

Page 7 - Tightening hidden cams; In the; remaining; completely tightened will loosen, and parts may separate.

7 DX-WD1239 Need help? Call 800-305-2204 Tightening hidden cams In the remaining steps, use these illustrations for instructions on tightening hidden cams. Warning: Risk of damage or injury. Hidden cams must be completely tightened. Hidden cams that are not completely tightened will loosen, and part...

Page 11 - Make sure that the metal pins in the right end (

11 DX-WD1239 Need help? Call 800-305-2204 Step 6: Fasten the right end ( A ) to the top ( D ). Use a Phillips screwdriver to tighten two hidden cams. See “Tightening hidden cams” on page 7. Note: Make sure that the metal pins in the right end ( A ) insert into the holes in the valance ( G ). You’ll ...

Page 12 - Screw holes

12 DX-WD1239 Need help? Call 800-305-2204 Step 7: Fasten the upright ( C ) to the top ( D ). Use a Phillips screwdriver to tighten two hidden cams. See “Tightening hidden cams” on page 7.Fasten the bottom ( E ) to the ends ( A and B ) and upright ( C ). Use a Phillips screwdriver and six black 1 7/8...

Page 13 - Fasten the swivel casters (; Phillips screwdriver

13 DX-WD1239 Need help? Call 800-305-2204 Step 8: Fasten the swivel casters ( K ) and the non-swivel casters ( L ) to the bottom ( E ). Use a Phillips screwdriver and 16 black 9/16" large head screws ( Q ) (four screws per caster). You’ll need: The tabs on the non-swivel casters ( K ) must inser...

Page 14 - Never use this

14 DX-WD1239 Need help? Call 800-305-2204 Step 9: Carefully stand your TV cart upright.Push the rubber sleeves ( N ) on the metal pins ( N ), then insert the metal pins into the hole locations of your choice in the right end ( A ) and upright ( C ). Set the adjustable shelf ( F ) onto the metal pins...

Page 16 - ENGLISH; Certificate of Conformity; This certificate applies to the Sauder

www.dynexproducts.com (800) 305-2204 Distributed by Best Buy Purchasing, LLC 7601 Penn Ave. South, Richfield, MN 55423 U.S.A. © 2011 BBY Solutions, Inc. All rights reserved. DYNEX is a trademark of BBY Solutions, Inc. Registered in some countries. All other products and brand names are trademarks of...