Dynex DX-TVM113 - Manuals - manualsarea.com

Page 2 - Safety information and specifications; IMPORTANT SAFETY; Do not use this product for any; Tools needed; We’re here for you

2 Safety information and specifications DX-TVM113 Safety information and specifications IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONSCAUTION: Do not use this product for any purpose not explicitly specified by Dynex.Improper installation may cause property damage or personal injury. If you...

Page 3 - Package contents; TV Hardware Bag; Label; Label; Lag bolt washer

Package contents 3 DX-TVM113 Package contents Make sure that you have all the hardware necessary to assemble your new TV wall mount: A Wall Plate (1) B Left TV Bracket (1) C Right TV Bracket (1) R Wall Plate Template (1) TV Hardware Bag DX-TVM113 Wall Plate Template • Gabarit • Plantilla Note : For ...

Page 4 - Installation instructions; The center of your TV will match the center of the wall plate (; You’ll need; Measuring tape

4 Installation instructions DX-TVM113 Installation instructions STEP 1 - Determine wall-mount location Note: • For more detailed information on determining where to drill your holes, visit our online height-finder at: http://mf1.bestbuy.selectionassistant.com/index.php/heightfinder • Your TV should ...

Page 5 - Option 1: Installing on a wood stud* wall; Note; Align the wall plate template (

Installation instructions 5 DX-TVM113 STEP 2 - Option 1: Installing on a wood stud* wall Note : Any drywall covering the wall must not exceed 5/8" (16 mm). 1 Locate the stud. Verify the center of the stud with an edge-to-edge stud finder. 2 Align the wall plate template ( R ) at the height you d...

Page 6 - Option 2: Installing on a solid concrete* or concrete block wall; directly onto the concrete surface.

6 Installation instructions DX-TVM113 STEP 2 - Option 2: Installing on a solid concrete* or concrete block wall CAUTION: To prevent property damage or personal injury, never drill into mortar between blocks. Mount wall plate directly onto the concrete surface. 1 Align the wall plate template ( R ) a...

Page 7 - Temporarily lay the TV brackets (; Flat back; Obstructed back; assembling the wall mount.; Irregularly-shaped back; when assembling the wall mount.; Remove the TV brackets.

Installation instructions 7 DX-TVM113 STEP 3 - Determine whether your TV has a flat back or an irregular or obstructed back 1 Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages and scratches. 2 If your TV has a table-top stand attached, remove t...

Page 8 - Select from the following washers:

8 Installation instructions DX-TVM113 STEP 4 - Select screws, washers, and spacers 1 Select the hardware for your TV (screws, washers, and spacers). A limited number of TVs come with mounting hardware included. (If there are screws that came with the TV, they are almost always in the holes on the ba...

Page 9 - Option 1: Attaching the mounting hardware to TVs with a flat back; Align the left and right TV brackets (; Screws

Installation instructions 9 DX-TVM113 STEP 5 - Option 1: Attaching the mounting hardware to TVs with a flat back 1 Align the left and right TV brackets ( B and C ) with the screw holes on the back of the TV. Make sure that the brackets are level. 2 Install washers ( F or G ), and screws ( D , I , J ...

Page 10 - backs

10 Installation instructions DX-TVM113 STEP 5 - Option 2: Attaching the mounting hardware to TVs with irregular or obstructed backs 1 Align the left and right TV brackets ( B and C ) with the screw holes on the back of the TV. Make sure that the brackets are level. 2 Place spacers ( H or N ) behind ...

Page 11 - STEP 6 - Mounting the TV to the wall plate; Place the TV brackets (; B C

Installation instructions 11 DX-TVM113 STEP 6 - Mounting the TV to the wall plate 1 Place the TV brackets ( B and C ) into the slotted flanges of the wall plate ( A ). 2 Push the bottom of the TV toward the wall until the latch mechanism clicks into place. B C A HEAVY! You will need assistance with ...

Page 12 - Removing the TV from the wall plate

12 Installation instructions DX-TVM113 Removing the TV from the wall plate 1 Grasp the TV by the bottom edge, then pull down on the locking cords and pull the bottom of the TV out from the wall. 2 Release the locking cords and lift the top of the TV from the wall bracket. Unlatched Pull down to unla...