Dynex DX-TVM111 - Manuals - manualsarea.com

Page 2 - Safety information and specifications; IMPORTANT SAFETY; Do not use this product for any; Tools needed; We’re here for you

2 Safety information and specifications DX-TVM111 Safety information and specifications IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS CAUTION: Do not use this product for any purpose not explicitly specified by Dynex.Improper installation may cause property damage or personal injury. If yo...

Page 3 - Package contents; TV Hardware Bag; Label; Label

Package contents 3 DX-TVM111 Package contents Make sure that you have all the hardware necessary to assemble your new TV wall mount: A TV Bracket (1) B Wall Plate (1) J Wall mount template (1) TV Hardware Bag A B J Label Hardware Qty. C 4 D 4 E 4 F 4 M4 × 12 mm screw M4 × 30 mm screw M4 washer M4 sp...

Page 4 - Installation instructions; The center of your TV will match the center of the wall plate (; You’ll need; Measuring tape

4 Installation instructions DX-TVM111 Installation instructions STEP 1 - Determine wall-mount location Notes: • For more detailed information on determining where to drill your holes, visit our online height-finder at: http://mf1.bestbuy.selectionassistant.com/index.php/heightfinder • Your TV should...

Page 5 - Option 1: Installing on a wood stud* wall; Note; Align the wall plate template (; Avoid potential injuries or property damage!

Installation instructions 5 DX-TVM111 STEP 2 - Option 1: Installing on a wood stud* wall Note : Any wallboard or material covering the wall must not exceed 5/8" (16 mm). 1 Locate the stud. Verify the center of the stud with an edge-to-edge stud finder. 2 Align the wall plate template ( J ) at th...

Page 6 - Option 2: Installing on a solid concrete* or concrete block wall; directly onto the concrete surface.

6 Installation instructions DX-TVM111 STEP 2 - Option 2: Installing on a solid concrete* or concrete block wall CAUTION: To prevent property damage or personal injury, never drill into mortar between blocks. Mount wall plate directly onto the concrete surface. 1 Align the wall plate template ( J ) a...

Page 7 - Temporarily lay the TV bracket (; Flat back; Obstructed back; assembling the wall mount.; Irregularly-shaped back; spacers when assembling the wall mount.; Remove the TV bracket (

Installation instructions 7 DX-TVM111 STEP 3 - Determine whether your TV has a flat, irregular, or obstructed back 1 Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages and scratches. 2 If your TV has a table-top stand attached, remove the stand....

Page 8 - For an irregular or obstructed TV back, use the following spacers:

8 Installation instructions DX-TVM111 STEP 4 - Select screws, washers, and spacers 1 Select the hardware for your TV (screws, washers, and spacers). A limited number of TVs come with mounting hardware included. (If there are screws that came with the TV, they are almost always in the holes on the ba...

Page 9 - Option 1: Attaching the mounting hardware to TVs with a flat back; Align the TV bracket (; NOTE; Screws

Installation instructions 9 DX-TVM111 STEP 5 - Option 1: Attaching the mounting hardware to TVs with a flat back 1 Align the TV bracket ( A ) with the screw holes on the back of the TV. 2 Install washers ( E ), and screws ( C ) into the top two holes in the back of the TV. NOTE : If the hole pattern...

Page 10 - backs

10 Installation instructions DX-TVM111 STEP 5 - Option 2: Attaching the mounting hardware to TVs with irregular or obstructed backs 1 Align the TV bracket ( A ) with the screw holes on the back of the TV. 2 Place spacers ( F ) behind the TV bracket and the washers ( E ) over the holes in the TV brac...

Page 11 - STEP 6 - Mounting the TV to the wall plate; • Place the TV bracket (

Installation instructions 11 DX-TVM111 STEP 6 - Mounting the TV to the wall plate • Place the TV bracket ( A ) into the slotted flanges of the wall plate ( B ). The TV can be mounted either (1) vertically, or (2) with a 5° tilt. HEAVY! You will need assistance with this step. 1 - Vertical mount Note...

Page 12 - STEP 7 - Locking the TV to the wall plate; • Slide the locking bar (

12 Installation instructions DX-TVM111 STEP 7 - Locking the TV to the wall plate • Slide the locking bar ( I ) through the TV bracket ( A ) and the wall plate ( B ) to secure the TV. A padlock (not included) may be used for extra security. You’ll need Vertical mount Tilt mount Locking bar ( I ) DX-T...