Dynex DX-DPF7-10-MX - Manuals

Dynex DX-DPF7-10-MX – Manual in PDF format online.

Manuals:

Manual

Manual Dynex DX-DPF7-10-MX

Summary

Page 2 - ” Digital Picture Frame; Contents; Read these instructions.

2 7” Digital Picture Frame Contents Important safety instructions ...................................2Features ....................................................................4Setting up your digital picture frame ........................8Using your digital picture frame ...........................

Page 3 - Important safety instructions; Clean only with a dry cloth.

Important safety instructions 3 6 Clean only with a dry cloth. 7 Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8 Do not install near any heat sources such as radiators, heat registers, stoves, or other devices (including amplifiers) that produce h...

Page 4 - Features; Controls and connections; Top view; Button; POWER; Press to turn the picture frame on or off.

4 Features 15 Batteries should not be exposed to excessive heat such as sunshine, fire, or the like. Caution : Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type. Features Package contents: • Digital picture frame• AC adapter• Remote control wit...

Page 5 - EXIT; Press to enter the; ROTATE

Features 5 2 MODE/ENTER In picture mode, press to toggle between slideshow, browse, and thumbnail views.In menu mode, press to confirm a selection. 3 EXIT Press to enter the Main menu. On the Main menu, press to enter the Card Selection screen. 4 COPY/DELETE / (up) Press to copy a picture from an in...

Page 6 - Side views; Description; Memory card slot

6 Features Side views # Slot/Port/Jack Description 1 Memory card slot Insert an SD, SDHC, MMC, MS, or xD memory card (not provided) into this slot to view pictures. 2 USB port Insert a USB flash drive (not provided) into this port. 3 DC 5 V jack Plug the AC adapter (provided) into this jack to provi...

Page 7 - Remote control; MENU; Press to return to the Main menu.

Features 7 Remote control # Button Description 1 MENU Press to enter the Setup Menu screen. 2 EXIT Press to return to the Main menu. On the Main menu , press to enter the Card Selection screen. 10-0796 DX_DPF7-10_MAN_ENG_V2.fm Page 7 Thursday, July 29, 2010 7:18 AM

Page 8 - Setting up your digital picture frame; Installing the remote control battery; A battery comes pre-installed in your remote control. To; Press; to navigate down in; ZOOM; Press to zoom in on an image.; SLIDE SHOW; Press to start a slideshow.

8 Setting up your digital picture frame Setting up your digital picture frame Installing the remote control battery Note: A battery comes pre-installed in your remote control. To activate the battery, remove the plastic insulating sheet from the battery tray. 3 (prev), (next), (up), (down)/ ROTATE P...

Page 9 - To install a remote control battery:; Turn the remote control over to the back side.

Setting up your digital picture frame 9 Warning: There is a danger of explosion if the battery is not replaced correctly. Replace with the same or equivalent type battery. To install a remote control battery: 1 Turn the remote control over to the back side. 2 Push the release tab to the right and pu...

Page 11 - Making connections; Connecting the AC adapter; Make sure that the AC power outlet matches the AC; To connect the AC adapter:; • Plug the small DC power connector into the DC 5V jack on; • Use only the AC adapter supplied with your digital picture

Setting up your digital picture frame 11 Making connections Connecting the AC adapter Make sure that the AC power outlet matches the AC adapter’s power specifications (100-240 V ~, 50/60 Hz) prior to plugging in the adapter. To connect the AC adapter: • Plug the small DC power connector into the DC ...

Page 12 - Positioning your digital picture frame; Note

12 Setting up your digital picture frame Positioning your digital picture frame Your digital picture frame has a built-in stand. The stand can be rotated to support the frame in either a horizontal or a vertical position. Make sure that the stand is rotated to one of the two positions indicated on t...

Page 13 - Configuring your digital picture frame; To configure your digital picture frame:; Main menu; SETTING; Setup menu

Setting up your digital picture frame 13 Configuring your digital picture frame To configure your digital picture frame: 1 Press EXIT . The Main menu opens. 2 Press or to highlight the SETTING icon, then press MODE/ENTER . The Setup menu opens. 3 Press , or to highlight an option, then press MODE/EN...

Page 15 - Using your digital picture frame; Starting a picture slideshow; To start a picture slide show:; Main; PHOTO

Using your digital picture frame 15 Using your digital picture frame Starting a picture slideshow To start a picture slide show: 1 Power on the frame. A slideshow of pictures will immediately begin. If no memory card or USB device has been inserted, the slideshow will be of pictures stored in the fr...

Page 16 - Copying and deleting pictures; To copy pictures to your frame:; YES; Notes

16 Using your digital picture frame 5 Press MODE/ENTER again in BROWSE mode to display THUMBNAIL mode. Thumbnail-sized pictures appear on the screen in a table. 6 Press , , , or to highlight a thumbnail. 7 Press MODE/ENTER to display the picture. 8 To switch to a different memory device, press EXIT ...

Page 17 - To delete pictures from internal memory:; you want to delete the picture.; Troubleshooting; Problem; • Make sure that the memory card is one of the

Troubleshooting 17 To delete pictures from internal memory: 1 Remove any card or USB memory device you have inserted in the frame. 2 Locate the picture you wish to delete in SLIDESHOW or BROWSE mode, then press COPY/DEL . A message asks if you want to delete the picture. 3 Press or to highlight YES ...

Page 19 - Specifications

Specifications 19 Specifications Legal notices FCC Part 15 This device complies with Part 15 of the FCC Rules. Operation of this product is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, includin...

Page 20 - Legal notices; FCC warning

20 Legal notices which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the ...

Page 21 - 0-day limited warranty; How long does the coverage last?

Legal notices 21 90-day limited warranty Dynex Products (“Dynex”) warrants to you, the original purchaser of this new DX-DPF7-10/DX-DPF7-10-MX (“Product”), that the Product shall be free of defects in the original manufacture of the material or workmanship for a period of 90 days from the date of yo...

Page 22 - Where is the warranty valid?

22 Legal notices Where is the warranty valid? This warranty is valid only to the original purchaser of the Product in the United States, Canada, and Mexico. What does the warranty not cover? This warranty does not cover: • Customer instruction • Installation • Set up adjustments • Cosmetic damage • ...