Dyna-Glo RMC-FA150DGD - Manuals

Page 3 - PROPANE CONSTRUCTION HEATER ILLUSTRATED / PARTS BREAKDOWN:; TABLE OF CONTENTS; WARNING: NOT FOR HOME OR RECREATIONAL VEHICLE USE.; THINNERS, DUST PARTICLES OR UNKNOWN CHEMICALS.; PROPANE CONSTRUCTION HEATER; WARNING; WARNING: CONSTRUCTION HEATERS ARE NOT FOR USE IN

Introduction & Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 • General Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 • Product Features . . . . . . . . . . . . . . ....

Page 4 - CHECK WITH YOUR LOCAL FIRE SAFETY; DYNA-GLO PROPANE FORCED AIR CONSTRUCTION HEATERS; READ THIS USER’S MANUAL CAREFULLY AND COMPLETELY BEFORE TRYING; SPECIFICATIONS; NOT FOR USE WITH DUCT WORK.

The heater is designed and approved for use as a construction heater under ANS Z83.7 CSA 2.14. It is hard to anticipate every use which may be made of this heater. CHECK WITH YOUR LOCAL FIRE SAFETY AUTHORITY IF YOU HAVE QUESTIONS ABOUT APPLICATIONS. DYNA-GLO PROPANE FORCED AIR CONSTRUCTION HEATERS T...

Page 5 - PRODUCT FEATURES

Accidents are always tragic especially because so many of them could have been prevented with little care and judgment. There are some basic good practices, we hope you will follow for safe use of your heater. • Children should be carefully supervised, when they are in the area. • Always maintain pr...

Page 6 - UNPACKING HEATER; Remove all protective packing applied to heater for shipment.; Assembly Components and Instructions for Steel Base Units:; Tools required for assembly:

5 6 PROPANE CONSTRUCTION HEATER UNPACKING HEATER 1. Remove heater from carton. 2. Remove all protective packing applied to heater for shipment. 3. Retain cartons and packaging material until unit is operated and found in good condition. 4. Check heater for any shipping damage. If heater shows any ex...

Page 7 - Assembly Components and Instructions for Plastic Base Units:; FA125 Series Includes:

Assembly Components and Instructions for Plastic Base Units: 5 6 PROPANE CONSTRUCTION HEATER Hose Assembly Lock, clockwise 1. Assemble the Leg: Parts Required: Adjustable Leg Place the heater as shown, insert the leg into holes of the base, then adjust to the desired height. 4. Regulator and Hose Co...

Page 8 - INFORMATION ON SIZE * CAPACITY OF PROPANE GAS CYLINDERS:; The propane (LP) gas tank must also be equipped with the following:

7 8 PROPANE CONSTRUCTION HEATER INFORMATION ON SIZE * CAPACITY OF PROPANE GAS CYLINDERS: The chart below shows the number and size of propane tanks needed to run this heater. *Less gas is vaporized at lower temperatures. You may need two or more 100 pound (45 kg) tanks or one larger tank in colder w...

Page 9 - INSTALLATION TO THE PROPANE GAS TANK; REFILLING THE PROPANE GAS TANK; ALL NEW CYLINDERS MUST BE PURGED BEFORE THE FIRST FILLING.

Propane/LP Supply Valve Propane/LP Tank Regulator Fuel Gas Fitting Hose to Heater 7 8 PROPANE CONSTRUCTION HEATER INSTALLATION TO THE PROPANE GAS TANK IMPORTANT: You must use a propane/LP gas supply cylinder that is compatible with the connection device provided with the hose and regulator. REFILLIN...

Page 10 - PROPANE SAFETY; THE DISCONNECTED TANK MUST NEVER BE STORED IN A BUILDING, GARAGE; LEAK CHECKING

9 10 PROPANE CONSTRUCTION HEATER PROPANE SAFETY Propane is safe to use when properly handled. Careless handling of the Propane gas tank could result in fire and/or an explosion. Therefore: • Always keep tank/cylinder securely fastened in an upright position. • Avoid tipping tank on its side when con...

Page 11 - SHUTDOWN INSTRUCTIONS; REPLACEMENT PARTS

9 10 PROPANE CONSTRUCTION HEATER SHUTDOWN INSTRUCTIONS TEST FIRING HEATER Test fire your construction heater, following the lighting instructions applicable to the gas control sys- tem employed. Leak test all gas connections with soap solution. Soap bubbles indicate gas leakage. DO NOT use a match o...

Page 12 - TROUBLESHOOTING

Always be sure to follow proper maintenance procedures, by cleaning the heater once per month during regular usage, and check spark gap at least once per season. 1. Control dial is oﬀ and unit is 1. This heater uses a con4nuous spark 1. No correc4ve ac4on is needed. clicking/4cking ig...

Page 13 - WIRING DIAGRAMS

WIRING DIAGRAMS 11 12 PROPANE CONSTRUCTION HEATER PROPANE CONSTRUCTION HEATER NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING!

Page 15 - REPLACEMENT PARTS LIST

MODELS: FA40 Series FA50 Series FA60 Series 13 14 REPLACEMENT PARTS LIST PROPANE CONSTRUCTION HEATER NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING!

Page 17 - RMC-FA150DGD; PROPANE CONSTRUCTION HEATER ILLUSTRATED / PARTS BREAKDOWN

MODELS: RMC-FA100DGD RMC-FA125DGD/LPFA125H RMC-FA150DGD NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING! PROPANE CONSTRUCTION HEATER 15 16 PROPANE CONSTRUCTION HEATER ILLUSTRATED / PARTS BREAKDOWN

Page 21 - WARRANTY

19 20 WARRANTY LIMITED WARRANTY: DUTIES OF THE OWNER: This heating appliance must be operated in accordance with the written instructions furnished with this heater. This warranty shall not excuse the owner from properly maintaining this heater in accordance with the written instructions furnished w...

Page 22 - WARRANTY REGISTRATION; GHP

WARRANTY REGISTRATION IMPORTANT: We urge you to fill out your warranty registration card within fourteen (14)days of date of purchase. You can also register your warranty on the internet atwww.ghpgroupinc.com. Complete the entire serial number. Retain this portion of the cardfor your records. SAVE T...