Dyna-Glo LPFA43DGD - Manuals

Page 2 - PROPANE CONSTRUCTION HEATER; PROPANE CONSTRUCTION HEATER ILLUSTRATED / PARTS BREAKDOWN:; TABLE OF CONTENTS; WARNING: NOT FOR HOME OR RECREATIONAL VEHICLE USE.; THINNER, DUST PARTICLES OR UNKNOWN CHEMICALS.; WARNING; WARNING: CONSTRUCTION HEATERS ARE NOT FOR USE IN

1 PROPANE CONSTRUCTION HEATER Introduction & Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 3 • General Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 • Product Feat...

Page 3 - CHECK WITH YOUR LOCAL FIRE SAFETY; DYNA-GLO PROPANE FORCED AIR CONSTRUCTION HEATERS; READ THIS USER’S MANUAL CAREFULLY AND COMPLETELY BEFORE TRYING; NOT FOR USE WITH DUCT WORK.; Air Quality Hazard

2 PROPANE CONSTRUCTION HEATER TABLE OF CONTENTS NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING! The heater is designed and approved for use as a construction heater under ANSI Z83.7 CSA 2.14. It is hard to anticipate every use which may be made of this heater. CHECK WITH YOUR LOCAL FIRE SAFETY AUTH...

Page 4 - SPECIFICATIONS

3 PROPANE CONSTRUCTION HEATER SPECIFICATIONS NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING! Model No. FA43 Series Input Rating 37,000 BTU/hr (12.6 KW) Min. 43,000 BTU/hr (10.84 KW) Max. Type of Gas Propane Gas Supply Pressure to Regulator Maximum Cylinder Pressure Minimum (for purpose of Input Adj...

Page 5 - PRODUCT FEATURES; • Portable & Stable; GENERAL SAFETY INSTRUCTION

4 PROPANE CONSTRUCTION HEATER Accidents are always tragic especially because so many of them could have been prevented with little care and judgment. There are some basic good practices, we hope you will follow for safe use of your heater. • Children should be carefully supervised, when they are in ...

Page 6 - UNPACKING HEATER; Remove all protective packing applied to heater for shipment.; Assembly Components and Instructions for Steel Base Units:; Regulator and Hose Connection:; Tools required for assembly:

5 PROPANE CONSTRUCTION HEATER UNPACKING HEATER 1. Remove heater from carton. 2. Remove all protective packing applied to heater for shipment. 3. Retain cartons and packaging material until unit is operated and found in good condition. 4. Check heater for any shipping damage. If heater shows any exte...

Page 7 - INFORMATION ON SIZE * CAPACITY OF PROPANE GAS CYLINDERS:; *Less gas is vaporized at lower temperatures.; The propane (LP) gas tank must also be equipped with the following:; Temperature

6 PROPANE CONSTRUCTION HEATER INFORMATION ON SIZE * CAPACITY OF PROPANE GAS CYLINDERS: The chart below shows the number and size of propane tanks needed to run this heater. *Less gas is vaporized at lower temperatures. You may need two or more 100 pound (45 kg) tanks or one larger tank in colder wea...

Page 8 - INSTALLATION TO THE PROPANE GAS TANK; REFILLING THE PROPANE GAS TANK; ALL NEW CYLINDERS MUST BE PURGED BEFORE THE FIRST FILLING.

7 PROPANE CONSTRUCTION HEATER Propane/LP Supply Valve Propane/LP Tank Regulator Fuel Gas Fitting Hose to Heater INSTALLATION TO THE PROPANE GAS TANK IMPORTANT: You must use a propane/LP gas supply cylinder that is compatible with the connection device provided with the hose and regulator. REFILLING ...

Page 9 - PROPANE SAFETY; THE DISCONNECTED TANK MUST NEVER BE STORED IN A BUILDING, GARAGE; LEAK CHECKING

8 PROPANE CONSTRUCTION HEATER ALL NEW CYLINDERS MUST BE PURGED BEFORE THE FIRST FILLING. • Turn heater gas valve knob and gas tank valve to OFF position. • Propane tank valve equipped with the old style fitting has LEFT HANDED THREADS. Turn POL fitting CLOCKWISE to loosen. Protect POL fitting when d...

Page 10 - SHUTDOWN INSTRUCTIONS; REPLACEMENT PARTS

9 PROPANE CONSTRUCTION HEATER SHUTDOWN INSTRUCTIONS TEST FIRING HEATER Test fire your construction heater, following the lighting instructions applicable to the gas control sys- tem employed. Leak test all gas connections with soap solution. Soap bubbles indicate gas leakage. DO NOT use a match or f...

Page 11 - TROUBLESHOOTING

10 PROPANE CONSTRUCTION HEATER Always be sure to follow proper maintenance procedures, by cleaning the heater once per month during regular usage, and check spark gap at least once per season. 1. Control dial is oﬀ and unit is 1. This heater uses a con4nuous spark 1. No correc4ve ac4on ...

Page 12 - WIRING DIAGRAM

11 PROPANE CONSTRUCTION HEATER WIRING DIAGRAM NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING! RELAY /RELAIS /RELEVADOR POWER CORD CORDON D'ALIMENTATION CABLE DE ENERGIA MOTOR MOTEUR MOTOR IGNITOR ALLUMAGE ENCENDIDO TH ER M AL S W IT CH TH ER M CO NT AC TE UR IN TE RR UP TO R TE RM IC O CO NT RO L V...

Page 13 - REPLACEMENT PARTS LIST

MODEL: FA43 Series 12 PROPANE CONSTRUCTION HEATER REPLACEMENT PARTS LIST NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING!

Page 15 - WARRANTY

WARRANTY LIMITED WARRANTY: DUTIES OF THE OWNER: This heating appliance must be operated in accordance with the written instructions furnished with this heater. This warranty shall not excuse the owner from properly maintaining this heater in accordance with the written instructions furnished with th...

Page 16 - WARRANTY REGISTRATION; GHP

WARRANTY REGISTRATION IMPORTANT: We urge you to fill out your warranty registration card within fourteen (14)days of date of purchase. You can also register your warranty on the internet atwww.ghpgroupinc.com. Complete the entire serial number. Retain this portion of the cardfor your records. SAVE T...