Dukane P42A - Manuals - manualsarea.com

Page 2 - WARNING; Warnings and Safety Precaution; Important Information

2 Precautions Please read this manual carefully before using your plasmamonitor and keep the manual handy for future reference. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NOUSER-SERVICEABLE PARTS INSIDE.R E F E R S E RV I C I N G TO...

Page 3 - Précautions; ATTENTION; AVERTISSEMENT; Recommandations importantes

3 your investment in this plasma monitor, please adhere to thefollowing guidelines and recommendations for minimizingthe occurrence of image burn: * Always enable and use your computer’s screen saver function during use with a computer input source. * Display a moving image whenever possible.* Chang...

Page 5 - Contents; Contents of the Package

5 Contents Contents of the Package 䡺 Plasma monitor 䡺 Power cord 䡺 Remote control with two AAA Batteries 䡺 Manuals (Model Information and Operation) 䡺 Safety metal fittings 䡺 Ferrite cores, bands 䡺 Cable clamps 䡺 HDMI-DVI cable * These are fittings for fastening the unit to a wall to prevent tipping...

Page 6 - Installation

6 50 mm (2") 50 mm (2") 50 mm (2") Wall Wall 50 mm (2") 50 mm (2") You can attach your optional mounts or stand to the plasma monitor in one of the following two ways:* While it is upright. (See Drawing A)* As it is laid down with the screen face down (See Drawing B). Lay the pro...

Page 7 - How to use the remote control; Battery Installation and Replacement; Cable Management

7 cables clamp mounting hook Approx. 7m / 23ft How to use the remote control Battery Installation and Replacement Insert the 2 “AAA” batteries, making sure to set them inwith the proper polarity.1. Press and open the cover. 2. Align the batteries according to the (+) and (–) indication inside the ca...

Page 8 - Front View; Part Names and Function

8 q PowerTurns the monitor ’s power on and off. w Remote sensor windowReceives the signals from the remote control. e POWER/STANDBY indicatorWhen the power is on ............................. Lights green.When the power is in the standby mode ... Lights red. r INPUT SELECT / EXITSwitches the input.T...

Page 9 - Rear View/ Terminal Board; A B

9 A AC INConnect the included power cord here. B EXT SPEAKER L and RConnect speakers (optional) here. Maintain the correctpolarity. Connect the (positive) speaker wire to the EXT SPEAKER terminal and the (negative) speaker wire to the EXT SPEAKER terminal on both LEFT and RIGHT channels.Please refer...

Page 10 - OFF TIMER; Remote Control

10 q POWER ON/STANDBY Switches the power on/standby.(This does not operate when POWER/STANDBYindicator of the main unit is off.) w OFF TIMER Activates the off timer for the unit. e DISPLAYDisplays the source settings on the screen. r WIDEAutomatically detects the signal and sets the aspectratio.Wide...

Page 11 - Basic Operations; To change the size of the picture:

11 Basic Operations POWER To turn the unit ON and OFF: 1. Plug the power cord into an active AC power outlet.2. Press the Power button (on the unit). The monitor’s POWER/STANDBY indicator turns redand the standby mode is set. 3. Press the POWER ON button (on the remote control) to turn on the unit.T...

Page 12 - Wide Screen Operation; When viewing videos or digital video discs; WIDE Operations

12 Wide Screen Operation (manual) With this function, you can select one of six screen sizes. When viewing videos or digital video discs 1. Press the WIDE button on the remote control.2. Within 3 seconds ... Press the WIDE button again.The screen size switches as follows: → NORMAL → ANAMORPHIC → STA...

Page 14 - Menu Operations; OSM

14 Menu Operations The following describes how to use the menus and theselected items.1. Press the MENU/ENTER button on the remote control to display the MAIN MENU. SEL. MENU/ENTER OK EXIT EXIT M A I N M E N U P I C T U R E A U D I O I M A G E A D J . S E T U P F U N C T I O N S I G N A L I N F O . ...

Page 15 - Menu Tree

15 Main menu Sub menu Sub menu 2 Sub menu 3 Sub menu 4 RESET REFERENCE PICTURE PICTURE MEMORY OFF/MEMORY1-6 YES 17 CONTRAST ←→ 0 ← 52 → 72 YES 17 BRIGHTNESS ←→ 0 ← 32 → 64 YES 17 SHARPNESS ←→ 0 ← 16 → 32 YES 17 COLOR ←→ 0 ← 32 → 64 YES 17 TINT R ←→ G 0 ← 32 → 64 YES 17 NR OFF/NR-1/NR-2/NR-3 YES 17 C...

Page 17 - Picture Settings Menu; Storing picture settings; Adjusting the picture; Information; Reducing noise in the picture; Information

17 Picture Settings Menu Storing picture settings This function allows you to store in memory the currentinput signal and PICTURE menu settings and to recallthese settings when necessary.There are six picture memories, and notes of up to 15characters can be added to each. Example: Storing picture se...

Page 18 - Setting the color temperature; Adjusting the color to the desired level; Changing the Gamma Curve; Making the Low Tone adjustments

18 Setting the color temperature Use this procedure to set color tone produced by the plasmadisplay. Example: Setting “HIGH” On “COLOR TEMP.” of “PICTURE” menu, select “HIGH”. SEL. ADJ. EXIT RETURN P I C T U R E P I C T U R E M E M O R YC O N T R A S TB R I G H T N E S SS H A R P N E S SC O L O RT I...

Page 19 - Adjusting the colors; Adjusting the pedestal level (black level); Setting the picture to suit the movie

19 Adjusting the colors Use this procedure to adjust hue and color density for red,green, blue, yellow, magenta and cyan.You can accentuate the green color of trees, the blue ofthe sky, etc. Example: Adjusting the color tune for blue On “PICTURE” menu, select “COLOR TUNE”, then pressthe MENU/ENTER b...

Page 20 - Audio Settings Menu; Setting the allocation of the audio connectors; Image Adjust Settings Menu; Adjusting the Auto Picture

20 Audio Settings Menu A d j u s t i n g t h e t r e b l e , b a s s a n d l e f t / r i g h tbalance and audio input select The treble, bass and left/right balance can be adjusted tosuit your tastes. Example: Adjusting the bass On “BASS” of “AUDIO” menu, adjust the bass. SEL. ADJ. EXIT RETURN A U D...

Page 21 - SET UP Settings Menu; Setting the language for the menus; Setting the BNC connectors

21 SET UP Settings Menu Setting the language for the menus The menu display can be set to one of eight languages. Example: Setting the menu display to “DEUTSCH” On “LANGUAGE” of “SET UP” menu, select “DEUTSCH”. SEL. ADJ. EXIT RETURN S E T U P L A N G U A G EB N C I N P U TD - S U B I N P U TH D S E ...

Page 22 - Setting the video signal format

22 Information 䡵 RGB SELECT modes One of these 7 modes must be selected in order todisplay the following signals correctly. AUTO: Select the suitable mode for the specifications of input signals as listed in the table “Computer inputsignals supported by this system” on page 7 of ModelInformation. ST...

Page 23 - Setting the screen size for S1/S2 video input; Setting the gray level for the sides of the screen; Turning on/off the menu display; Setting the position of the menu; Resetting to the default values

23 Setting the screen size for S1/S2 video input If the S-video signal contains screen size information, theimage will be automatically adjusted to fit the screen whenthis S1/S2 is set to AUTO.This feature is available only when an S-video signal isinput via the VIDEO3 terminal. Example: Setting “S1...

Page 24 - Function Settings Menu; POWER/STANDBY indicator; Setting the Input Skip; Reducing burn-in of the screen

24 Function Settings Menu Setting the power management for computerimages T h i s e n e rg y - s a v i n g ( p o w e r m a n a g e m e n t ) f u n c t i o nautomatically reduces the monitor’s power consumptionif no operation is performed for a certain amount of time. Example: Turning the power manag...

Page 26 - Setting Closed Caption; Reducing the brightness of Closed Caption; Signal Information Menu

26 OSM ORBITER Use this to set OSM menu shift. Example: Setting “OSM ORBITER” to “OFF” On “OSM ORBITER” of “PDP SAVER” menu, select“OFF”. SEL. ADJ. EXIT RETURN P D P S AV E R P E A K B R I G H TO R B I T E RI N V E R S E / W H I T ES C R E E N W I P E RS O F T F O C U SO S M O R B I T E RO S M C O N...

Page 27 - Communication Parameters; External Control

27 Application These specifications cover the communications control ofthe plasma monitor by external equipment. Connections Connections are made as described below. Connector on the plasma monitor side: EXTERNALCONTROL connector.Use a crossed (reverse) cable. Type of connector: D-Sub 9-pin male 1 5...

Page 28 - Troubleshooting

28 Remedy • If there are no abnormalities in the image and sound, the noise is caused by the cabinet reacting tochanges in temperature. This will not affectperformance. • Leave some space between the display and the connected components. • Replace both batteries with new ones. • Plug the monitor’s p...

Page 29 - Model Information; For the operation of your plasma monitor,

Model Information For the operation of your plasma monitor, refer to “Operation Manual”.

Page 31 - AVERTISSMENT; PRÉCAUTIONS IMPORTANTES DE SÉCURITÉ

3 1. Lire ces instructions.2. Garder ces instructions.3. Respecter tous les avertissements.4. Suivre toutes les instructions.5. Ne pas utiliser cet appareil près de l’eau.6. Nettoyer seulement avec un chiffon sec.7. Ne pas boucher les ouvertures d’aération. Installer selon les instructions du fabric...

Page 32 - Warning; Caution

4 Warning Not for use in a computer room as defined in the Standardfor the Protection of Electronic Computer/ Data ProcessingEquipment ANSI/NFPA 75. This equipment has been tested and found to comply withthe limits for a Class B digital device, pursuant to Part 15 ofthe FCC Rules. These limits are d...

Page 33 - Attention

5 Avertissement Ne pas utiliser dans une salle d’ordinateurs telle que définied a n s l a N o r m e p o u r l a p r o t e c t i o n d e s o r d i n a t e u r sélectroniques/appareils de traitement des données ANSI/NFPA75. DOC avis de conformation Cet appareil numérigue de la Classe B respecte toutes...

Page 34 - Specifications

6 Specifications Screen Size 36.3"(H) 20.4"(V) inches 921(H) 518(V) mm diagonal 42" Aspect Ratio 16 : 9 Resolution 853(H) 480(V) pixels Pixel Pitch 0.04"(H) 0.04"(V) inches 1.08(H) 1.08(V) mm Color Processing 4,096 steps, 68.7 billion colors Signals Synchronization Range Horizont...

Page 35 - Table of Signals Supported; 2Wide VGA Supported resolution; Computer input signals supported by this system

7 Table of Signals Supported 42Wide VGA Supported resolution • When the screen mode is NORMAL, each signal is converted to a 640 dots 480 lines signal (42Wide VGA). (Except for * 2, * 4 ) • When the screen mode is FULL, each signal is converted to a 853 dots 480 lines signal (42Wide VGA). (Except fo...

Page 37 - Limited Warranty; Plasma Monitors

Copyright © by NEC Plasma Display Corporation NEC and the NEC logo are registered trademarks of NEC Corporation Dukane Audio Visual Products Corp warrantsthis product to be free from defects in material andworkmanship under the following terms and, subject tothe conditions set forth below, agrees to...