Dukane 8912H - Manuals - manualsarea.com

Page 2 - Fastening the lens cover; Preparations; Loading batteries into the remote control; WARNING

2 Fastening the lens cover To avoid losing the lens cover, please fasten the lens cover to the projector using the enclosed strap. . Fix the strap to the strap hole of the lens cover. Thread one end of the strap through the strap hole of the lens cover and make the loop at the end, and let the other...

Page 3 - On a horizontal surface; • Keep a space of 30 cm or more between; Arrangement

3 ENGLISH On a horizontal surface Suspended from the ceiling • Keep a space of 30 cm or more between the sides of the projector and other objects such as walls. • Consult with your dealer before a special installation such as suspending from a ceiling. WARNING ►Install the projector in a stable hori...

Page 4 - Connecting your devices; player

4 Connecting your devices Be sure to read the manuals for devices before connecting them to the projector. Make sure that all the devices are suitable to be connected with this product, and prepare the cables required to connect. Please refer to the following illustrations to connect them. WARNING ►...

Page 5 - Connecting power supply; Turning on the power; AC inlet

5 ENGLISH Connecting power supply . Put the connector of the power cord into the AC inlet of the projector. 2. Firmly plug the power cord’s plug into the outlet. WARNING ►Please use extra caution when connecting the power cord, as incorrect or faulty connections may result in fire and/or electrical ...

Page 6 - Adjusting the projector's elevator; To loose an elevator foot, push the; CAUTION

6 Adjusting the projector's elevator When the place to put the projector is slightly uneven to the left or right, use the elevator feet to place the projector horizontally. Using the feet can also tilt the projector in order to project at a suitable angle to the screen, elevating the front side of t...

Page 7 - Displaying the picture; NOTE

7 ENGLISH Displaying the picture . Activate your signal source. Turn the signal source on, and make it send the signal to the projector. 2. Use the VOLUME +/VOLUME - buttons to adjust the volume. To have the projector silent, press the MUTE button on the remote control. 3. Press the INPUT button on ...

Page 8 - Turning off the power

8 VIDEO DOC.CAMERA KEYSTONE ASPECT SEARCH BLANK MUTE MY BUTTON POSITION 1 2 ESC ENTER MENU RESET COMPUTER MY SOURCE/ AUTO MAGNIFY PAGE UP VOLUME DOWN ࡯ ON OFF 㧗 FREEZE Turning off the power . Press the STANDBY/ON button on the projector or the remote control. The message "Power off?" will ap...

Page 9 - Replacing the lamp

9 ENGLISH Replacing the lamp A lamp has finite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. Preparation of a new lamp and ear...

Page 10 - About disposal of a lamp:; or

0 HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE WARNING ►The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a different lifetime, and some may burst or burn out s...

Page 11 - Cleaning and replacing the air filter

ENGLISH Please check and clean the air filter periodically. When the indicators or a message prompts you to clean the air filter, comply with it as soon as possible. The air filter has two kinds of filters inside. Replace the filters when they are damaged or too soiled. To prepare the new filters, c...

Page 12 - Using the CD manual; to ensure the proper use.; System requirements

2 Using the CD manual The other manuals for this product are written into the included CD-ROM titled “User’s Manual (detailed)”. Before using the CD-ROM, please read the following to ensure the proper use. System requirements The system for using the CD-ROM requires the following. Windows®: OS:Micro...

Page 13 - Regulatory notices; Declaration of Conformity; Trade name; INSTRUCTIONS TO USERS:; connect the core to the projector.; For the Customers in CANADA

3 ENGLISH Regulatory notices Declaration of Conformity Trade name HITACHI Model Number CP-X201/CP-X301/CP-X401/CP-X450 Responsible Party Hitachi America, Ltd. Address 900 Hitachi way, Chula Vista, CA 91914-3556 U.S.A. Telephone Number +1 -800-225-1741 This device complies with part 15 of the FCC Rul...

Page 14 - Information for users applicable in European Union countries; The manufacturer (Gemtek) hereby declare that this equipment

4 Information for users applicable in European Union countries 1. The manufacturer (Gemtek) hereby declare that this equipment (wireless network card), model SD-Link11g is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. 2. This symbol on the produc...

Page 15 - Specifications; Item

5 ENGLISH Specifications Item Specifications Product name Liquid crystal projector Liquid Crystal Panel Panel size 1.6 cm (0.63 type) Drive system TFT active matrix Pixels 786,432 pixels (1024 horizontal x 768 vertical) Lens Zoom lens 8755H, 8912H : F=2.3~2.5 f=18.9~22.6 8913H : F=1. 6 ~1. 8 f=18.9~...

Page 16 - Warranty and after-service; will tell you what warranty condition is applied.; Trademark acknowledgment; • Pentium is a registered trademark of Intel Corporation.

6 Warranty and after-service If an abnormal operation (such as smoke, strange odor or excessive sound) should occur, stop using the projector immediately. Otherwise if a problem occurs with the projector, first refer to the “Troubleshooting” of the “Operating Guide” in the CD and run through the sug...