Dukane 8911 - Manuals - manualsarea.com

Page 3 - Projector; User Manual – Operating Guide; Thank you for purchasing this projector.; About this manual; WARNING; NOTE

1 Projector 8911 User Manual – Operating Guide Thank you for purchasing this projector. About this manual Various symbols are used in this manual. The meanings of these symbols are described below. WARNING This symbol indicates information that , if ignored, could possibly result in personal injury ...

Page 4 - Contents; menu

2 About this manual . . . . . . . . . . 1Contents . . . . . . . . . . . . . . . . . 2Projector features . . . . . . . . . . 3Preparations . . . . . . . . . . . . . . 3 About contents of package . . . . . . . 3 Fastening the lens cap . . . . . . . . . . 3 Part names . . . . . . . . . . . . . . . 4 Pr...

Page 5 - Projector features; Fastening the lens cap

3 Projector features / Preparations Projector features This projector is used to project various computer signals as well as NTSC/PAL/ SECAM video signals onto a screen. It requires just a little space for installation and gets a large image from short distance.  High Brightness Newly developed 230...

Page 6 - Part names

4 Y VIDEO RGB IN1 RGB IN2 DVI-D RGB OUT CONTROL AUDIO-IN REMOTE CONTROL USB DC OUT S-VIDEO LAN COMPONENT VIDEO C B /P B C R /P R R-AUDIO IN-L AUDIO-OUT Part names Lens (   16 ) Filter cover (   46 ) (Air ﬁ lter and intake vent are inside.) Elevator button (   8 ) Elevator foot (   8 ) Remote...

Page 7 - Control buttons; REMOTE CONTROL port (; Remote control; Cursor buttons

5 STANDBY/ON VIDEO UP DOWN BLANK ASPECT PUSH LASER INDICATOR LASER RGB ENTER ON OFF ESC POSITION MAGNIFY MUTE KEYSTONE FREEZE ONE TOUCH AUTO PAGE MENU RESET VOLUME STANDBY/ON INPUT KEYSTONE RESET MENU POWER TEMP LAMP Part names RGB button (   17 ) PAGE buttons (   22 ) LASER button (   14 ) Di...

Page 8 - Setting up

6 Setting up Setting up WARNING ►Place the projector in a stable position horizontally. A fall or a turnover could cause an injury and/or damage to the projector. Then using damaged projector could result in a ﬁ re and/or an electric shock. • Don’t place the projector on an unstable, slant or vibran...

Page 9 - Arrangement

7 Arrangement Refer to the illustrations and tables below to determine the screen size and projection distance.The values shown in the table are calculated for a full size screen: 1024 x 768 (a) The screen size (diagonal) (b) Distance from the projector to the screen (±10%) (c) The height of the scr...

Page 10 - Adjusting the projector's elevator; Elevator feet

8 Adjusting the projector's elevator WARNING ►Do not adjust the projector’s elevator during use or immediately after use. Handling while the projector is in a high temperature could cause a burn and/or malfunction to the projector. CAUTION ►If you press the elevator button without holding the projec...

Page 11 - About the fi lter cover for bottom-up use

9 Setting up About the ﬁ lter cover for bottom-up use WARNING ►Do not replace the ﬁ lter cover during use or immediately after use. While the projector connects with a power supply, or the projector is in a high temperature state, handling could cause an electric shock, a ﬁ re, a burn and/or malfunc...

Page 12 - Connecting your devices; CAUTION

10 Setting up Connecting your devices CAUTION ►Turn off all devices prior to connecting them to the projector. Attempting to connect a live device to the projector may generate extremely loud noises or other abnormalities that may result in malfunction and/or damage to the device and/or projector. ►...

Page 13 - Examples of connection with a computer

11 Y VIDEO RGB IN1 RGB IN2 DVI-D RGB OUT CONTROL AUDIO-IN REMOTE CONTROL USB DC OUT S-VIDEO LAN COMPONENT VIDEO C B /P B C R /P R R-AUDIO IN-L AUDIO-OUT Y VIDEO RGB IN1 RGB IN2 DVI-D RGB OUT CONTROL AUDIO-IN REMOTE CONTROL USB DC OUT S-VIDEO LAN COMPONENT VIDEO C B /P B C R /P R R-AUDIO IN-L AUDIO-O...

Page 14 - Examples of connection with a VCR/DVD player

12 Y VIDEO RGB IN1 RGB IN2 DVI-D RGB OUT CONTROL AUDIO-IN REMOTE CONTROL USB DC OUT S-VIDEO LAN COMPONENT VIDEO C B /P B C R /P R R-AUDIO IN-L AUDIO-OUT Y VIDEO RGB IN1 RGB IN2 DVI-D RGB OUT CONTROL AUDIO-IN REMOTE CONTROL USB DC OUT S-VIDEO LAN COMPONENT VIDEO C B /P B C R /P R R-AUDIO IN-L AUDIO-O...

Page 15 - Connecting power supply; AC inlet

13 Setting up Connecting power supply WARNING ►Please use extra caution when connecting the power cord as incorrect or faulty connections may result in ﬁ re and/or electrical shock. • Only use the power cord that came with the projector. If it is damaged, contact your dealer to newly get correct one...

Page 16 - Putting batteries; Laser pointer; and theLASER INDICATOR lights while the LASER button is pressed.

14 Putting batteries WARNING ►Always handle the batteries with care and use them only as directed. Improper use may result in battery explosion, cracking or leakage, which could result in ﬁ re, injury and/or pollution of the surrounding environment. • Be sure to use only the batteries speciﬁ ed. Do ...

Page 17 - Using the remote control

15 Remote control Using the remote control CAUTION ►Be careful in handling the remote control. • Do not drop or otherwise expose the remote control to physical impact. • Do not get the remote control wet or place it on wet objects. Doing so may result in malfunction. • Remove the batteries from the ...

Page 18 - Power switch; Turning on the power

16 STANDBY/ON VIDEO UP DOWN BLANK ASPECT PUSH LASER INDICATOR LASER RGB ENTER ON OFF ESC POSITION MAGNIFY MUTE KEYSTONE FREEZE ONE TOUCH AUTO PAGE MENU RESET VOLUME STANDBY/ON INPUT KEYSTONE RESET MENU POWER TEMP LAMP Power on/off Power on/off WARNING ►When the power is on, a strong light is emitted...

Page 19 - Operating

17 Operating Operating Adjusting the volume 1. Press the VOLUME button on the remote control. A dialog will appear on the screen to aid you in adjusting the volume. 2. Use the cursor buttons ▲/▼ to adjust the volume.To close the dialog and complete the operation, press the VOLUME button again. Even ...

Page 20 - Adjusting the zoom and focus; Automatic keystone distortion correction:; Selecting an aspect ratio; At a video signal/no signal; Zoom knob

18 Operating Adjusting the zoom and focus 1. Use the zoom knob to adjust the screen size. 2. Use the focus ring to focus the picture. Adjusting screen with ONE-TOUCH 1. Press the ONE TOUCH button on the remote control. This activates the following functions at one time.  Signal search: Projector wi...

Page 21 - Using the automatic adjustment feature; At a RGB signal; Adjusting the position

19 Operating Using the automatic adjustment feature 1. Press the AUTO button on the remote control.  At a RGB signal The vertical position, the horizontal position, the clock phase and horizontal size will be automatically adjusted. Make sure that the application window is set to its maximum size p...

Page 22 - Using the magnify feature; Correcting the keystone distortions

20 Using the magnify feature 1. Press the ON button of MAGNIFY on the remote control. The “MAGNIFY” indication will appear on the screen (although the indication will disappear in several seconds with no operation), and the projector will enter the MAGNIFY mode. 2. Use the cursor buttons ▲/▼ to adju...

Page 24 - Operating the computer screen; • While using this function, please connect only with a computer.; Available function

22 Operating the computer screen CAUTION ►Mistaken use of the mouse/keyboard control could damage your equipment. • While using this function, please connect only with a computer. • Before connecting, read the manuals of the computer you will connect. NOTE • It may not be possible to control noteboo...

Page 25 - Multifunctional settings; At the EASY MENU; RESET button

23 Operating STANDBY/ON VIDEO UP DOWN BLANK ASPECT PUSH LASER INDICATOR LASER RGB ENTER ON OFF ESC POSITION MAGNIFY MUTE KEYSTONE FREEZE ONE TOUCH AUTO PAGE MENU RESET VOLUME Multifunctional settings Using the menu function This projector has the following menus: PICTURE, IMAGE, VIDEO Qlty., INPUT, ...

Page 26 - EASY Menu; With the EASY MENU, items shown in the table below can

24 Multifunctional settings EASY Menu Item Description ASPECT Using the buttons ◄/► switches the mode for aspect ratio. See the item ASPECT of section IMAGE menu (   29 ). MODE Using the buttons ◄/► switches the mode of picture type. The modes of picture type are combinations of a mode of GAMMA an...

Page 28 - PICTURE Menu; Item; With the PICTURE menu, items shown in the table below

26 Multifunctional settings PICTURE Menu Item Description BRIGHT Using the buttons ▲/▼ adjusts the brightness. : Light  Dark CONTRAST Using the buttons ▲/▼ adjusts the contrast. : Strong  Weak GAMMA Using the buttons ▲/▼ switches the GAMMA mode. #1 DEFAULT  #1 CUSTOM  #2 DEFAULT #3 CUSTOM  #3 D...

Page 29 - To adjust CUSTOM

27 Multifunctional settings Item Description COLOR TEMP Using the buttons ▲/▼ switches the mode of color temperature. HIGH  MIDDLE  LOW  CUSTOM To adjust CUSTOM Selecting the CUSTOM and then pressing the button ► or the ENTER button displays a dialog to aid you in adjusting the OFFSET and/or GAIN...

Page 31 - IMAGE Menu; With the IMAGE menu, items shown in the table below can

29 Multifunctional settings IMAGE Menu Item Description ASPECT Using the buttons ▲/▼ switches the mode for aspect ratio. At a RGB/DVI signal 4:3  16:9  NORMAL At a video signal / no signal 4:3  16:9  SMALL • The NORMAL mode keeps the original aspect ratio of the signal.• At a HDTV signal of 1125...

Page 33 - With the VIDEO Qlty. menu, items shown in the table below

31 Multifunctional settings VIDEO Qlty. Menu With the VIDEO Qlty. menu, items shown in the table below can be performed. Select an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote...

Page 34 - INPUT Menu; With the INPUT menu, items shown in the table below can

32 Multifunctional settings INPUT Menu Item Description COLOR SPACE Using the buttons ▲/▼ switches the mode for color space. AUTO  RGB  SMPTE240  REC709  REC601 • This item can be selected only at a RGB signal or a component video signal (except signals of 525i(480i)/625i(576i) from the componen...

Page 36 - SETUP Menu

34 Multifunctional settings SETUP Menu Item Description WHISPER Using the buttons ▲/▼ turns off/on the whisper mode. NORMAL  WHISPER • When the WHISPER is selected, acoustic noise and screen brightness are reduced. MIRROR Using the buttons ▲/▼ switches the mode for mirror status. NORMAL  H:INVERT ...

Page 37 - SCREEN Menu; With the SCREEN menu, items shown in the table below

35 Multifunctional settings SCREEN Menu Item Description LANGUAGE Using the buttons ▲/▼ switches the OSD (On Screen Display) language. SUOMI  POLSKI  TÜRKÇE ENGLISH  FRANÇAIS  DEUTSCH  ESPAÑOL ESP ESP  ITALIANO NORSK  NEDERLANDS  PORTUGUÊS  日本語    SVENSKA  日本語 MENU POSITION Using the bu...

Page 38 - below; My Screen

36 Multifunctional settings Item Description START UP Using the buttons ▲/▼ switches the mode for the start up screen. The start up screen is the screen displayed when no signal or an unsuitable signal is detected. MyScreen  ORIGINAL  TURN OFF MyScreen is the screen you can register a desired scre...

Page 40 - OPTION Menu

38 Multifunctional settings OPTION Menu Item Description ONE TOUCH Using the buttons ▲/▼ turns on/off the automatic keystone correction function. TURN ON  TURN OFF You can automatically correct vertical keystone distortion corresponding to the angle (forward/backward tilt) at which the unit is set ...

Page 42 - NETWORK Menu

40 Multifunctional settings NETWORK Menu Item Description DHCP Using the buttons ▲/▼ turns on/off the DHCP function. TURN ON  TURN OFF If your network doesn’t support the DHCP function, select the TURN OFF. IP ADDRESS Enter the IP address of the projector using Enter Enter the ◄/►/▲/▼ buttons.This ...

Page 43 - When your network enables the DHCP function

41 Multifunctional settings NETWORK Menu (continued) This projector provides the NETWORK function. When you start to use this function, please consult your dealer for further information. To start, connect the LAN port to a gateway device via a CAT-5 cable, then set up the projector according to the...

Page 45 - need to login again to regain authority.

43 4. If you modiﬁ ed the IP conﬁ guration or the DHCP setting, click on "Reboot" in Screen 2 to have the settings take effect. 5. Close the Web browser to end the conﬁ guration session. Multifunctional settings NETWORK Menu (continued) NOTE • If the Projector Network Conﬁ guration dialog is...

Page 46 - Maintenance; About disposal of a lamp

44 Maintenance Maintenance Lamp WARNING HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE ►The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lam...

Page 47 - In the case of replacement by yourself,; Loosen the 2 screws (marked by arrow) of

45 Lamp (continued) When the indicators or a message prompts you to replace the lamp, replace the lamp as soon as possible. 1. Turn the projector off, and unplug the power cord. Allow the lamp to cool for at least 45 minutes. 2. To prepare a new lamp, contact your dealer and tell the lamp type numbe...

Page 48 - Air fi lter; Filter cover’s claws

46 Maintenance When the indicators or a message prompts you to clean the air ﬁ lter, clean the air ﬁ lter as soon as possible. If the air ﬁ lter becomes clogged by dust or the like, internal temperatures rise and the power may be automatically turned off for malfunction prevention. 1. Turn the proje...

Page 49 - Inside of the projector; inspected by your dealer about once every year.; Caring for the lens; directly with your hand.; Caring for the cabinet and remote control; Other care

47 Maintenance WARNING ►Before caring, make sure the power switch is off and the power cable is not plugged in, and then allow the projector to cool sufﬁ ciently. The care in a high temperature state of the projector could cause a burn and/or malfunction to the projector. ►Never try to care for the ...

Page 50 - Troubleshooting; Related messages; When the unit's power is on, messages such as those shown below may be

48 Troubleshooting Troubleshooting Related messages When the unit's power is on, messages such as those shown below may be displayed. When any such message is displayed on the screen, please respond as described below. If the same message is displayed after the treatment, or if a message other than ...

Page 51 - Message; The internal portion temperature is rising.; A note of precaution when cleaning the air fi lter.

49 Troubleshooting Related messages (continued) Message Description CHECK THE AIR FLOW The internal portion temperature is rising. Please turn the power OFF, and allow the unit to cool down at least 20 minutes. After having conﬁ rmed the following items, please turn the power ON again. • Is there bl...

Page 52 - Regarding the indicator lamps; displayed, please contact your dealer or service company.; Green; Orange; Red; Red; Red

50 Troubleshooting Regarding the indicator lamps Lighting and ﬂ ashing of the POWER indicator, the LAMP indicator, and the TEMP indicator have the meanings as described in the table below. Please respond in accordance with the instructions within the table. If the same indication is displayed after ...

Page 53 - Regarding the indicator lamps (continued); The cooling fan is not operating.; There is a possibility that the interior portion; It is time to clean the air fi lter.

51 Troubleshooting Regarding the indicator lamps (continued) POWER indicator LAMP indicator TEMP indicator Description Blinking In Red or Lighting In Red Turned off Blinking In Red The cooling fan is not operating. Please turn the power off, and allow the unit to cool down at least 20 minutes. After...

Page 54 - Phenomena that may easily be mistaken for machine defects; Phenomenon; The electrical power cord is not plugged in.

52 Troubleshooting Phenomena that may easily be mistaken for machine defects WARNING ►Never use the projector if abnormal operations such as smoke, strange odor, excessive sound, damaged casing or elements or cables, penetration of liquids or foreign matter, etc. should occur. In such cases, immedia...

Page 56 - Warranty and after-service; Specifications

54 Warranty And After-Service Warranty and after-service If a problem occurs with the equipment, ﬁrst refer to the “Troubleshooting” and run through the suggested checks. If this does not resolve the problem, please contact your dealer or the service company. They will tell you what warranty conditi...

Page 59 - Example of computer signal

Projector CP-X443 User's Manual – Operating GuideTechnical Example of computer signal Resolution (H x V) H. frequency (kHz) V. frequency (Hz) Rating Signal mode 720 x 400 37.9 85.0 VESA TEXT 640 x 480 31.5 59.9 VESA VGA (60Hz) 640 x 480 37.9 72.8 VESA VGA (72Hz) 640 x 480 37.5 75.0 VESA VGA (75Hz) 6...

Page 60 - Initial set signals; and H POSITION in the IMAGE menu.

Example of computer signal Initial set signals The following signals are used for the initial settings. The signal timing of some computer models may be different. In such case, adjust the items V POSITION and H POSITION in the IMAGE menu. Back porch (B) Front porch (D) Back porch (b) Front porch (d...

Page 61 - Connection to the ports; RGB OUT

Y VIDEO RGB IN1 RGB IN2 DVI-D RGB OUT CONTROL AUDIO-IN REMOTE CONTROL USB DC OUT S-VIDEO LAN COMPONENT VIDEO C B /P B C R /P R R-AUDIO IN-L AUDIO-OUT Connection to the ports Connection to the ports A A RGB IN 1, B RGB IN 2, C RGB OUT D-sub 15pin mini shrink jack• Video signal: RGB separate, Analog, ...

Page 62 - COMPONENT VIDEO

Connection to the ports D DVI -D DVI-D jack (digital to digital) Pin Signal Signal Pin Signal Signal 1 T.M.D.S. Data 2 - 13 - 2 T.M.D.S. Data 2 + 14 +5V Power 3 T.M.D.S. Data 2/4 Shield 15 Ground (+5V, Analog H/V.sync) 4 - 16 Hot-Plug Sense 5 - 17 T.M.D.S. Data 0 - 6 SCL (DDC Clock) 18 T.M.D.S. Data...

Page 63 - J K; USB; PP

Connection to the ports L AUDIO IN ( AUDIO IN ( Ø3.5 stereo mini jack), J K AUDIO INL/R (RCA jack) AUDIO INL/R (RCA jack) • 200mVrms(max.) 50kΩ termination M AUDIO OUT ( AUDIO OUT ( Ø3.5 stereo mini jack) • 200mVrms(max.) 1kΩ output impedance O O USB USB B type jack Pin Signal Signal Signal Signal 1...

Page 64 - RS-232C Communication

RS-232C Communication RS-232C Communication 666 777 88 99 1 22 33 444 555 66 777 88 999 1 2 3 44 5 CONTROL port RS-232C cable (Cross) RS-232C port of the projector of the computer - (1) (1) CD RD (2) (2) RD TD (3) (3) TD - (4) (4) DTR GND (5) (5) GND - (6) (6) DSR RTS (7) (7) RTS CTS (8) (8) DTS - (...

Page 74 - Audio Visual Products

2900 Dukane Drive St. Charles, Illinois 60174 www.dukcorp.com/av Toll-free: 800-676-2487 Fax: 630-584-5156 e-mail: [email protected] Audio Visual Products #401-8911-00