Dukane 8755D-RJ - Manuals

4 Part names Part names Lens (  17 ) Filter cover (  42 ) (Air filter and intake vent are inside.) Elevator button (  9 ) Elevator foot (  9 ) Remote sensor (  16 ) Zoom knob (  19 ) Focus ring (  19 ) Vent (  7 ) Projector Lamp cover (  41 ) (Lamp unit is inside.) Bottom side Speaker Lens c...

5 Y R L AUDIO IN2 AUDIO OUT CONTROL RGB IN1 RGB IN2 USB RGB OUT AUDIO IN1 VIDEO S-VIDEO C B / P B C R / P R K AC inlet (  14 ) Power switch (  17 ) Elevator button (  9 ) COMPONENT VIDEO ports (  13 ) Y C B /P B C R /P R S-VIDEO port (  13 ) VIDEO port (  13 ) CONTROL port (  12) Elevator foo...

6 SEARCH button (  19 ) RGB button (  18 ) VIDEO button (  19 ) ASPECT button (  19 ) HOME button (  23 ) MAGNIFY ON button (  21 ) OFF button (  21 ) END button (  23 ) FREEZE button (  22 ) POSITION button (  20 ) ESC button (  24 ) Part names Remote control Battery cover (  15 ) (on t...

7 Setting up Setting up WARNING ►Place the projector in a stable position horizontally. A fall or a turnover could cause an injury and/or damage to the projector. U sing a damaged projector could result in a fire and/or an electric shock. • Do not place the projector on an unstable, slant or vibrant ...

8 Arrangement Refer to the illustrations and tables below to determine the screen size and projection distance.The values shown in the table are calculated for a full size screen: TBD : 800×600, 8755D : 1024×768 (a) The screen size (diagonal) (b) Distance from the projector to the screen (±10%) (c) ...

9 Adjusting the projector's elevator CAUTION ►If you press the elevator button without holding the projector, the projector might crash down, overturn, smash your fingers and possibly result in malfunction. To prevent damaging the projector and injuring yourself, always hold the projector whenever us...

10 Setting up Using the Security Bar WARNING ►Do not use the security bar to prevent the projector from falling. Dropping or knocking over the projector may cause damage or injury. A commercial anti-theft chain or wire can be attached to the security bar on the projector. 1. How to attach An anti-th...

11 Setting up Connecting your devices CAUTION ►Turn off all devices prior to connecting them to the projector. Attempting to connect a live device to the projector may generate extremely loud noises or other abnormalities that may result in malfunction and/or damage to the device and/or projector. ►...

12 Setting up Examples of connection with a computer * In the default setting, the AUDIO IN1 port is the audio port for the RGB IN1 and RGB IN2 ports. To change the settings, refer to the AUDIO item in the SETUP menu. (  34 ) Y R L AUDIO IN2 AUDIO OUT CONTROL RGB IN1 RGB IN2 USB RGB OUT AUDIO IN1 V...

13 Y R L AUDIO IN2 AUDIO OUT CONTROL RGB IN1 RGB IN2 USB RGB OUT AUDIO IN1 VIDEO S-VIDEO C B / P B C R / P R K Y R L AUDIO IN2 AUDIO OUT CONTROL RGB IN1 RGB IN2 USB RGB OUT AUDIO IN1 VIDEO S-VIDEO C B / P B C R / P R K Y R L AUDIO IN2 AUDIO OUT CONTROL RGB IN1 RGB IN2 USB RGB OUT AUDIO IN1 VIDEO S-V...

14 Setting up Connecting power supply WARNING ►Please use extra caution when connecting the power cord, as incorrect or faulty connections may result in fire and/or electrical shock. • Only use the power cord that came with the projector. If it is damaged, contact your dealer to newly get correct one...

15 Putting batteries WARNING ►Always handle the batteries with care and use them only as directed. Improper use may result in battery explosion, cracking or leakage, which could result in fire, injury and/or pollution of the surrounding environment. • Be sure to use only the batteries specified. Do no...

16 Using the remote control CAUTION ►Be careful in handling the remote control. • Do not drop or expose the remote control to physical impact. • Do not get the remote control wet or place it on wet objects. It may result in malfunction. • Remove the batteries from the remote control and store them i...

17 Power on/off Power on/off WARNING ►When the power is on, a strong light is emitted. Do not look into the lens of projector. Also do not peep at the inside of projector through a hole. NOTE • Turn the power on/off in right order. Please power on the projector prior to the connected devices. Power ...

18 Operating Operating Adjusting the volume 1. Press the VOLUME button on the remote control. A dialog will appear on the screen to aid you in adjusting the volume. 2. Use the cursor buttons ▲/▼ to adjust the volume.To close the dialog and complete the operation, press the VOLUME button again. Even ...

19 Operating Adjusting the zoom and focus 1. Use the zoom knob to adjust the screen size. 2. Use the focus ring to focus the picture. Selecting an aspect ratio 1. Press the ASPECT button on the remote control. Each time you press the button, the projector switches the mode for aspect ratio in turn. ...

20 Operating Using the automatic adjustment feature 1. Press the AUTO button on the remote control.  For an RGB signal The vertical position, the horizontal position, the clock phase and the horizontal size will be automatically adjusted. And the aspect ratio will be automatically selected. Make su...

21 Using the magnify feature 1. Press the ON button of MAGNIFY on the remote control. The “MAGNIFY” indication will appear on the screen (although the indication will disappear in several seconds with no operation), and the projector will enter the MAGNIFY mode. 2. Use the cursor buttons ▲/▼ to adju...

23 Operating Operating the computer screen CAUTION ►Mistaken use of the mouse/keyboard control could damage your equipment. • While using this function, please connect only with a computer. • Before connecting, read the manuals of the computer you will connect. NOTE • It may not be possible to contr...

24 Multifunctional settings Multifunctional settings Using the menu function This projector has the following menus: PICTURE, IMAGE, INPUT, SETUP, SCREEN, OPTION, and EASY MENU. EASY MENU cosists of functions often used, and the other menus are classified into each purpose. Each of these menus is ope...

25 Multifunctional settings EASY Menu Item Description ASPECT Using the buttons ◄/► switches the mode for aspect ratio. See the ASPECT item in the IMAGE menu (  30 ). KEYSTONE Using the buttons ◄/► corrects the keystone distortion. See the item KEYSTONE of section SETUP menu. (  21 ) MODE Using th...

27 Multifunctional settings PICTURE Menu Item Description BRIGHTNESS Using the buttons ▲/▼ adjusts the brightness. : Light  Dark CONTRAST Using the buttons ▲/▼ adjusts the contrast. : Strong  Weak GAMMA Using the buttons ▲/▼ switches the GAMMA mode. #1 DEFAULT  #1 CUSTOM  #2 DEFAULT #3 CUSTOM  ...

28 Multifunctional settings Item Description COLOR TEMP Using the buttons ▲/▼ switches the mode of color temperature. HIGH  MIDDLE  LOW  CUSTOM To adjust CUSTOM Selecting the CUSTOM and then pressing the button ► or the ENTER button displays a dialog to aid you in adjusting the OFFSET and/or GAIN...

30 Multifunctional settings IMAGE Menu Item Description ASPECT Using the buttons ▲/▼ switches the mode for aspect ratio. For an RGB signal 4:3  16:9  NORMAL For a video signal / no signal 4:3  16:9  SMALL • The NORMAL mode keeps the original aspect ratio of the signal. • For an HDTV signal of 11...

32 Multifunctional settings INPUT Menu Item Description COLOR SPACE Using the buttons ▲/▼ switches the mode for color space. AUTO  RGB  SMPTE240  REC709  REC601 • This item can be selected only for an RGB signal or a component video signal (except signals of 525i(480i)/625i(576i)/SCART RGB from ...

34 Multifunctional settings SETUP Menu Item Description KEYSTONE Using the buttons ▲/▼ corrects the keystone distortion. Upper in the data  Lower in the data • The adjustable range of this function will vary with the type of input signal. At some signals, this function may not work well.• When the ...

35 Multifunctional settings SCREEN Menu Item Description LANGUAGE Using the buttons ▲/▼ switches the OSD (On Screen Display) language. SUOMI  POLSKI  TÜRKÇE ENGLISH  FRANÇAIS  DEUTSCH  ESPAÑOL  ITALIANO NORSK  NEDERLANDS  PORTUGUÊS  日本語    SVENSKA  MENU POSITION Using the buttons ◄/►/▲/...

36 Multifunctional settings Item Description START UP Using the buttons ▲/▼ switches the mode for the start-up screen. The start-up screen is a screen displayed when no signal or an unsuitable signal is detected. MyScreen  ORIGINAL  TURN OFF MyScreen is a screen you can register as a desired scree...

38 Multifunctional settings OPTION Menu Item Description AUTO SEARCH Using the buttons ▲/▼ turns on/off the automatic signal search function. TURN ON  TURN OFF This function works with INPUT, RGB, and VIDEO buttons. When the TURN ON is selected, detecting no signal automatically cycles through inpu...

40 Maintenance Maintenance Lamp WARNING HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE ►The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a different lifetime, an...

41 Lamp (continued) A lamp has a finite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. Preparation of a new lamp and early repla...

42 If the air filter becomes clogged by dust or the like, internal temperatures rise and could cause a fire, a burn and/or malfunction to the projector. When the indicators or a message prompts you to clean the air filter, clean the air filter as soon as possible. Please check and clean the air filter...

43 Maintenance 4. Apply a vacuum cleaner to the air filter and the filter cover. Please replace the air filter when it is damaged or too soiled. 5. Replace the air filter in its original position. Secure the air filter in place by pressing each of the six   locations. Make sure there is no dust or dirt r...

44 Maintenance WARNING ►Before caring, make sure the power switch is off and the power cable is not plugged in, and then allow the projector to cool sufficiently. The care in a high temperature state of the projector could cause a burn and/or malfunction to the projector. ►Never try to care for the i...

4 5 1. Turn the projector off, and unplug the power cord. Allow the projector to cool sufficiently. 2. After making sure that the projector has cooled adequately, slowly turn over the projector, so that the bottom is facing. 3. Remove the battery cover. Turn the battery cover in the direction indicat...

4 7 Troubleshooting Related messages When the unit's power is on, messages such as those shown below may be displayed. When any such message is displayed on the screen, please follow the instructions described below. If the same message is displayed after the remedy, or if a message other than the f...

4 8 Troubleshooting Regarding the indicator lamps Lighting and flashing of the POWER indicator, the LAMP indicator, and the TEMP indicator have the meanings as described in the table below. Please follow the instructions within the table. If the same indication is displayed after the remedy, or if an...

4 9 Troubleshooting Regarding the indicator lamps (continued) POWER indicator LAMP indicator TEMP indicator Description Blinking In Red or Lighting In Red Turned off Blinking In Red The cooling fan is not operating. Please turn the power off, and allow the projector to cool down at least 20 minutes....

50 Troubleshooting Phenomena that may be easy to be mistaken for machine defects WARNING ►Never use the projector if abnormal operations such as smoke, strange odor, excessive sound, damaged casing or elements or cables, penetration of liquids or foreign matter, etc. should occur. In such cases, imm...

5 3 Warranty And After-Service Warranty and after-service If a problem occurs with the equipment, first refer to the “Troubleshooting” and run through the suggested checks. If this does not resolve the problem, please contact your dealer or service company. They will tell you what warranty condition ...

55 Projector 8755D-RJ only Network Functions This section is only intended to explain Network Functions. Contents Network Functions ............................................................... 59Settings ................................................................................ 64Projector ...

56 NETWORK Menu  MENU [RGB]  IMAGE  SETUP  PICTURE  INPUT  OPTION  EASY MENU  SCREEN :SELECT  NETWORK  IP ADDRESS SUBNET MASK  DATE AND TIME  DHCP   TURN OFF  DEFAULT GATEWAY  TIME DIFFERENCE e‑SHOT INFORMATION Multifunctional settings Item Operation DHCP (Dynamic Host Configuration Protocol) DHCP TU...

59 Network Functions Network Functions Configuring and Controlling the Projector via a Web Browser You can change the settings of or control the projector via a network by using a web browser from a PC that is connected to the same network. (  4 ) Failure & Warning Alerts via E-mail The projecto...

61 Network Functions Before using the network functions… To use the network functions of this projector, the projector must be configured to suit your network. Consult with your network administrator before connecting the projector to your network. Incorrect network configuration of this projector may...

62 Configuring and controlling the projector via a web browser

64 Settings Settings Refer to the following for configuring or controlling the projector via a web browser. Example: If the IP address of the projector is set to 192.168.1.10:1) Enter [https://192.168.1.10] into the address bar of the web browser and the screen in Fig. 1 will be displayed. 2) Enter y...

65 Settings Network Information All screen images displayed in this manual are screens of a logon using an administrator ID. Any administrator only functions will not be displayed when using a user ID. Refer to the descriptions in each table. Displays the projector’s current network configuration set...

66 Settings Network Settings Displays and configures network settings. Click the [Apply] button to save the settings. • The new configuration settings are activated after restarting the network connection. When the configuration settings are changed, you must restart the network connection. You can res...

67 Settings Port Settings Displays and configures communication port settings. Click the [Apply] button to save the settings. • The new configuration settings are activated after restarting the network connection. The network connection must be restarted when the configuration settings are changed. The...

68 Settings Mail Settings Displays and configures e-mail addressing settings. Click the [Apply] button to save the settings. • You can confirm whether the mail settings work correctly using the [Send Test Mail] button. • If you connect the projector to an existing network, consult a network administra...

69 Settings Alert Settings Displays and configures failure & warning alerts. Item Description Cover Error Configures Cover Error alert settings. SNMP Trap Click the [Enable] check box to enable SNMP Trap alerts for this item. Send Mail Click the [Enable] check box to enable e-mail alerts for this ...

73 Settings Alert Settings (Continued) Item Description Filter Time Alarm Configures Filter Time Alarm alert settings. SNMP Trap Click the [Enable] check box to enable SNMP Trap alerts for this item. Send Mail Click the [Enable] check box to enable e-mail alerts for this item. Mail Subject Configures ...

74 Settings Schedule Settings Displays and configures schedule settings. Item Description Daily Configures the daily schedule. Schedule Click the [Enable] check box to enable daily scheduling. Schedule List Displays the current daily schedule. Sunday Configures the Sunday schedule. Schedule Click the [...

76 Settings To add additional functions and events click the [Add] button and set the following items. Item Description Time Configures the time to execute commands. Command Configures the commands to be executed. Power Parameter Configures the parameters for power control. Input Source Parameter Config...

78 Settings Security Settings Item Description Administrator authority Configures the Administrator ID and Password. Administrator ID Configures the Administrator ID. The length of the text can be up to 32 alphanumeric characters. Administrator Password Configures the Administrator Password. The length...

79 Projector Control Projector Control Projector Control The items shown in the table below can be performed using the [Projector Control] menu. Select an item using the up and down arrow keys on the PC. Most of the items have a submenu. Refer to the table below for details. Controls the projector. ...

81 Auto Search Turns the Automatic signal search function On/Off. Auto Power off Configures the timer to shut off the projector when no signal is detected. Auto Adjust Enable Enables/Disables Auto Adjustment. Projector Control Projector Status Displays and configures the current projector status. Item...

82 Projector Control Network Restart Restarts the projector’s network connection. Item Description Restart Restarts the projector’s network connection in order to activate new configuration settings. • Restarting requires you to re-log on in order to further control or configure the projector via a we...

83 Failure & Warning Alerts via E-mail Failure & Warning Alerts via E-mail The projector can automatically send an alert to specified e-mail addresses when the projector requires maintenance or has encountered an error. • Up to five e-mail addresses can be specified. • The projector may be not ...

84 Failure & Warning Alerts via E-mail 8) Configure the Failure/Warning Alerts via E-mail settings. Click [Alert Settings] on the main menu. 9) Select and configure each alert item. Refer to [Alert Settings] in [Configuring and Controlling the Projector via a Web Browser] for further information. 1...

85 Projector management via SNMP Projector management via SNMP When SNMP is enabled, the projector is able to send Failure/Warning Alerts to a specified PC. • It is recommended that SNMP functions be carried out by a network administrator. • SNMP management software must be installed on the computer ...

86 Controlling the Projector via Scheduling Controlling the Projector via Scheduling The projector can be automatically controlled via scheduling. • You can schedule the following control events: Power ON/OFF, Input Source and Transferred Image Display. • There are 3 types of Scheduling, 1) daily 2)...

87 Controlling the Projector via Scheduling Date/Time Settings The Date/Time setting can be adjusted via a web browser. Example: If the IP address of the projector is set to 192.168.1.10: • A Network Restart is required after the Daylight Savings Time or SNTP configuration settings have been changed....

89 e-Shot (Still Image Transfer) Display e-Shot (Still Image Transfer) Display The projector can display a still image that is transferred via the network. Communication Port The following port is used for e-Shot. TCP #9716 (  9 ) e-Shot (Still Image Transfer) Settings Configure the following items ...

91 Command Control via the Network Command Control via the Network You can configure and control the projector via the network using RS-232C commands. Communication Port The following two ports are assigned for the command control. TCP #23 TCP #9715 Command Control Settings Configure the following ite...

92 Command Control via the Network Command Control Settings (Continued) When the authentication setting is enabled, the following settings are required. (  20 ) 7) Click [Security Settings] on the main menu. 8) Click [Network Control] and enter the desired authentication password. * See Note1. 9) C...

93 Command Control via the Network Command format Command formats differ among the different communication ports. TCP #23 You can use the RS-232C commands without any changes. The reply data format is the same as the RS-232C commands. However, the following reply will be sent back in the event of au...

94 Command Control via the Network Reply Data format The connection ID (the data is same as the connection ID data on the sending data format) is attached to the RS-232C commands reply data. <ACK reply> Reply Connection ID 0x06 1 byte <NAK reply> Reply Connection ID 0x15 1 byte <Error...

Command Control via the Network Automatic Connection Break The TCP connection will be automatically disconnected after there is no communication for 30 seconds after being established. Authentication The projector does not accept commands without authentication success when authentication is enabled...

Projector , 8755D-RJ, & 8065 User's Manual – Operating GuideTechnical Example of computer signal Resolution (H x V) H. frequency (kHz) V. frequency (Hz) Rating Signal mode 720 x 400 37.9 85.0 VESA TEXT 640 x 480 31.5 59.9 VESA VGA (60Hz) 640 x 480 37.9 72.8 VESA VGA (72Hz) 640 x 480 37.5 75.0 VE...

98 Example of computer signal Initial set signals The following signals are used for the initial settings. The signal timing of some computer models may be different. In such case, adjust the items V POSITION and H POSITION in the IMAGE menu. Back porch (B) Front porch (D) Back porch (b) Front porch...

99 Connection to the ports A RGB IN1, B RGB IN2, RGB OUT D-sub 15pin mini shrink jack• Video signal: RGB separate, Analog, 0.7Vp-p, 75Ω terminated (positive) • H/V. sync. Signal: TTL level (positive/negative) • Composite sync. Signal: TTL level At RGB signal At component video signal Pin Signal 1 Vi...

100 Connection to the ports 4 3 2 1 G VIDEO RCA jack• System: NTSC, PAL, SECAM, PAL-M, PAL-N, NTSC4.43, PAL60• 1.0±0.1Vp-p, 75Ω terminator F S-VIDEO Mini DIN 4pin jack Pin Signal 1 Color signal 0.286Vp-p (NTSC, burst), 75Ω terminator Color signal 0.300Vp-p (PAL/SECAM, burst) 75Ω terminator 2 Brightn...

101 Connection to the ports Y R L AUDIO IN2 AUDIO OUT CONTROL RGB IN1 RGB IN2 USB RGB OUT AUDIO IN1 VIDEO S-VIDEO C B / P B C R / P R K H M H AUDIO 1-IN ( Ø3.5 stereo mini jack), I J AUDIO 2 L/R (RCA jack) • 200mVrms(max.) 35kΩ termination K AUDIO OUT ( Ø3.5 stereo mini jack) • 200mVrms(max.) 1kΩ ou...

102 RS-232C Communication RS-232C Communication 6 7 8 9 1 2 3 4 5 6 7 8 9 1 2 3 4 5 CONTROL port RS-232C cable (Cross) RS-232C port of the projector of the computer - (1) (1) CD RD (2) (2) RD TD (3) (3) TD - (4) (4) DTR GND (5) (5) GND - (6) (6) DSR RTS (7) (7) RTS CTS (8) (8) DTS - (9) (9) RI Conne...

2900 Dukane DriveSt. Charles, Illinois 60174 www.dukcorp.com/av Toll-free: 800-676-2487Fax: 630-584-5156e-mail: [email protected] Audio Visual Products #401-8755D-0 1