Dukane 8104HW-WALLARM - Manuals

Dukane 8104HW-WALLARM – Manual in PDF format online.

Manuals:

Manual

Manual Dukane 8104HW-WALLARM

Summary

Page 3 - ENGLISH; Wall mount unit for LCD projectors; Model name; User’s Manual; WARNING; Indicates a prohibited action.; Table of Contents; Dukane; Disclaimer

ENGLISH 1 Wall mount unit for LCD projectors Model name User’s Manual The following symbols are used in this manual to help you use this product safely and correctly, and to prevent injury to yourself and others or damage to property. Read through the safety instructions below so you can operate the...

Page 4 - Outline and Relevant Models

2 Installation of this product requires special technical skills. Ask your dealer or service center (for details, see the User’s Manual supplied with the LCD projector) to handle the installation work. Be sure to obser ve the following instructions when installing an LCD projector. 1. Considerable c...

Page 6 - Contents of this package

4 Symbol Part name Quantity Appearance Symbol Part name Quantity Appearance A Arm assembly 1 G M4 × 8 hexagon head screws 4 B Bracket 1 H M4 × 8 round head screws 4 C Front cap 1 I Allen wrench 1 D Screw caps 8 J Template sheet 1 QT54601 60inch208.3mm(8.2inch) 80inch282.3mm(11.1inch) 83inch(16:9)360...

Page 7 - Installation procedure

ENGLISH 5 Remove the shipping screws from the arm assembly (A). The arm assembly (A) is assembled before shipping. Before attaching the arm assembly to a wall, remove the two shipping screws (M5 screws with spring washer and ﬂat washer) as shown in the ﬁgure below. Installation procedure Shipping sc...

Page 8 - Tab

6 Remove the base bracket (O) from the arm assembly (A). Before attaching the arm assembly to a wall, remove the screws to disassemble it as shown in the ﬁgure below. Before disassembly, place the arm assembly on a mat or the protective plastic it was shipped in to prevent damaging the ﬂoor or the b...

Page 9 - Attach the base bracket (O) to a wall using the anchor

ENGLISH 7 Attach the base bracket (O) to a wall using the anchor bolts (M10). The holes in the base bracket (O) are oval to permit horizontal adjustment. For details on the length and number of the anchor bolts (M10) that are required, see “Tools needed for installation” on page 2. (O) ■ Use anchor ...

Page 10 - Screen center; Base bracket attachment diagram

Screen center Screen center Screen thickness Wall hole center Amount of vertical adjustment 42,5 195 (1,67) 125 (4,92) 136 (5,35) 32 (1,26) c3 a c2 85 (3,35) 240 c1 c4 b 30 30 (1,18) (1,18) (*1) Screen center 8 16:10 screen Base bracket attachment diagram (Full screen: Reference value for 1,280 × 80...

Page 11 - Screen sizes when used with Hitachi Star Board; Note that projection distance; Future models

ENGLISH 9 Screen sizes when used with Hitachi Star Board Projection size Aspect ratio Diagonal size (inches) Dimensions Projection size Aspect ratio Diagonal size (inches) Dimensions (*2): Sizes for a 4:3 aspect ratio setting. (*1): Sizes for a 16:9 aspect ratio setting. Unit: mm (inches) Unit: mm (...

Page 12 - Template sheet usage; Determining location of wall holes; Place the template sheet (J) where you want to project the image.

10 Template sheet usage Determining location of wall holes Place the template sheet (J) where you want to project the image. Vertical orientation: Align the top of the sheet with the upper edge of the image you want to project. Horizontal orientation: Align with the screen center. Note: The base bra...

Page 13 - Adjusting arm length; Example

ENGLISH 11 Adjusting arm length Arrows at the right and left sides of the template sheet (J) indicate the distance from the screen surface to the back of the projector. During rough adjustments of arm length, adjust it according to the dimension of distance from the screen surface to the back of the...

Page 14 - Never use screws other than those designated.

12 (L) × 3 (N) × 1 Attach the bracket (B) to the LCD projector using four M4 × 8 (G) hexagon head screws. Tightening torque: 0.98 N•m (10 kgf•cm) Attach the arm (M) to the base bracket (O). Insert the tab at the top of the arm (M) in the groove at the top of the base bracket (O). Then insert the U-g...

Page 15 - Connect the cables to the projector.; Connect as shown in the above fi gure.; resulting in damage or injury.

ENGLISH 13 Attach the LCD projector to which the bracket (B) has been attached to the adjusting block (Q). Tighten the four M4 x 8 round head screws (H). Tightening torque: 0.98 N•m (10 kgf•cm) Connect the cables to the projector. (B) (Q) (B) (Q) (H) (LCD projector rear panel) (LCD projector front p...

Page 16 - -2. Use the remote control to select a screen for making

14 Adjustments Turn the projector on and project an image to make adjustments. -1. Project an image, adjust the image settings and focus on the LCD projector. • Adjust the focus. • Select MIRROR. • Set the D-ZOOM to its maximum value (full screen). • Reset PERFECT FIT. • Set the KEYSTONE and KEYSTON...

Page 19 - Fine adjustment of vertical position; Loosen the screw on on the lower right side.; -5. Retighten the eight previously loosened securing screws.

ENGLISH 17 7. Fine adjustment of vertical position 1. Loosen the screw on on the lower right side. 2. Turn the height adjusting screw to adjust the height. 3. After completing adjustments, retighten the loosened screw. Tightening torque: 0.98 N•m (10 kgf•cm) Supplied Allen wrench (I) Note: Do not lo...

Page 20 - Adjusting knobs; Procedure for installing exterior parts

18 -1. The knobs indicated by the arrows can be removed. Place them on the projections inside the front cap (C) for storage. WARNING ■ Adjusting knobs are small parts that could be swallowed by children and pets and should be kept out of their reach. If your child swallows an adjusting knob, consult...

Page 22 - The cable cover is supplied with the LCD projector.

20 -5. Attach the arm cover (E) to the arm (M). Insert the eight claws in the arm cover (E) in the eight holes in the arm (M). - 6. Assemble the cable cover as shown in the ﬁgure below. Note: The cable cover is supplied with the LCD projector. -7. Attach the cable cover. Engage the three tabs in the...

Page 23 - Adjustment precautions

ENGLISH 21 (both 4:3 and 16:10 screens) • Roll down screens and other screens that are not perfectly ﬂat tend to substantially distort the projection surface and cannot be used. Use board screens or other ﬂat screens. Bead-type screens with a high screen gain are not suitable for this projector. Use...

Page 24 - Adjustment specifications; DUKANE CORP AV SERVICE DEPT

22 Item Image movement Fine adjustment amount (amount of LCD projector movement) Description of adjustment method Fine adjustment of horizontal position ±3° page 16 Fine adjustment of horizontal keystone ±3° page 16 Fine adjustment of vertical keystone ±3° page 16 Fine adjustment of lateral position...