Page 2 - DECLARATION OF CONFORMITY; OIL FREE COMPRESSORS
CONTENTS: Page No. Contents/Declaration ...................................................................................... 1 Power Supply ................................................................................................... 2 General Safety Warning ....................................
Page 4 - POWER SUPPLY
POWER SUPPLY CONNECTING THE COMPRESSOR TO THE POWER SUPPLY:To eliminate the possibility of an electric shock your machine has been fitted with a BS approved, non rewireable moulded plug and cable which incorporates a fuse, the value of which is indicated on the pin face of the plug. Should the fuse ...
Page 6 - GETTING TO KNOW YOUR AIR COMPRESSOR
DA200 (1) HANDLE. (2) COWLING- covers, protects hot/moving parts. (3) PRESSURE REGULATOR- adjusts output air pressure. (4) AIR OUTLET CONNECTOR. (5) FEET. (6) ON/OFF SWITCH (1) AIR RECEIVER- stores air. (2) MOTOR COWLING- covers, protects hot/moving parts. (3) PRESSURE GAUGE- indicates receiver air ...
Page 7 - COMPRESSOR OPERATION
- 6 - Fig.1. Fig.2. Fig.3. (A) (B) (D) (C) (L) (K) Fig.4. (G) (F) Connect the compressor to the power supply. Always turn on and off by the appropriate switch. TURNING ON AND OFF (DA6/200/DA6/201, DA25/180, DA25/200 - NOT DA200): THE ON/OFF SWITCH. (A) Fig.1. is located on the top of the pressure sw...
Page 8 - MAINTENANCE
Fig.6. (J) (K) Fig.5. IMPORTANT: Before performing any maintenance operations, disconnect the compressor from the power supply and release all the air from the receiver, until the pressure gauge reads zero. EVERY DAY: Drain the condensate from the receiver. The drain (H) Fig. 5. is situated on the u...
Page 10 - TROUBLE SHOOTING GUIDE; DRAPER HELPLINE
- 9 - TROUBLE SHOOTING GUIDE DRAPER HELPLINE (023) 8049 4344 IMPORTANT: PLEASE NOTE ALL REPAIRS/ADJUSTMENTS SHOULD BE CARRIED OUT BY A QUALIFIED PERSON.SHOULD THE MACHINE REQUIRE TRANSPORTING TO A REPAIR AGENT, ENSURE IT IS WELL PROTECTED AGAINST DAMAGE IN TRANSIT. Power acble faulty.No power source...