Draper CDH140V - Manuals

✪✌ TRIGGER - When the variable speed switch trigger is depressed the chuck will rotate (providing the direction switch is in a clockwise or anticlockwise position). ✫✌ FORWARD/REVERSE LEVER - This lever determines the direction of rotation of the chuck, i.e. clockwise or anticlockwise. ✬✌ KEYLESS CH...

OPERATION AND USE BATTERY CHARGING To charge the battery pack it must first be removedfrom the drill. To release the battery pack squeezethe grips located on either side of the battery casingand gently pull the battery pack from the housing(fig.1).Plug the battery charger unit into a 13 amp, three-p...

- 9 - OPERATION AND USE Fig.6. Fig.7. Fig.8. Fig.9. Fig.10. ✫✌ ✬✌ CHANGING SPEEDS To change the speed of the chuck, push thetwo-speed gearbox selection switch ✫✌ , (fig. 6 and 7) forwards for low speed, or backwardsfor high speed. IMPORTANT: ONLY CHANGE SPEED WHEN THE MACHINE IS STOPPED. TRIGGER Whe...

- 10 - OPERATION AND USE DRILLING WOOD AND PLASTIC To prevent splitting around the drill holes on the reverse side, place a piece of scraptimber under the material to be drilled. DRILLING MASONRY Start drilling at a low speed to prevent the drill bit from wandering. Once penetrationis achieved fully...

DRAPER TOOLS LIMITED, Hursley Road, Chandler's Ford, Eastleigh, Hants. SO53 1YF. U.K. Helpline: (023) 8049 4344. Sales Desk: (023) 8049 4333. General Enquiries: (023) 8026 6355. Fax: (023) 8026 0784. www.draper.co.uke-mail: [email protected] ©Published by Draper Tools Ltd. No part of this publicati...