Dodge 2009 Caliber - Manuals

INTRODUCTION This Owner’s Manual has been prepared with the assis-tance of service and engineering specialists to acquaintyou with the operation and maintenance of your vehicle.It is supplemented by a Warranty Information Bookletand various customer-oriented documents. You areurged to read these pub...

VEHICLE MODIFICATIONS/ALTERATIONS WARNING! Any modifications or alterations to this vehicle couldseriously affect its roadworthiness and safety andmay lead to an accident resulting in serious injury ordeath. INTRODUCTION 7 1

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CONTENTS 䡵 A Word About Your Keys . . . . . . . . . . . . . . . . . 12 ▫ Ignition Key Removal . . . . . . . . . . . . . . . . . . 12 ▫ Locking Doors With The Key . . . . . . . . . . . . . 15 ▫ Key-In-Ignition Reminder . . . . . . . . . . . . . . . 15 䡵 Sen...

▫ Sound Horn With Remote Key Lock . . . . . . . . 22 ▫ Flash Lights With Remote Key Lock/Unlock . . 23 ▫ Using The Panic Alarm . . . . . . . . . . . . . . . . . 24 ▫ Programming Additional RKE Transmitters . . . 25 ▫ General Information . . . . . . . . . . . . . . . . . . . 25 ▫ RKE Transmitter Batt...

A WORD ABOUT YOUR KEYS The authorized dealer that sold you your new vehicle hasthe key code numbers for your vehicle locks. Thesenumbers can be used to order duplicate keys. Ask yourauthorized dealer for these numbers and keep them in asafe place. Ignition Key Removal Automatic Transmission — If Equ...

NOTE: If you try to remove the key before you place the shift lever in PARK, the key may become trapped tem-porarily in the ignition switch cylinder. If this occurs,rotate the key to the right slightly, then remove the key as described. If a malfunction occurs, the system will trapthe key in the ign...

CAUTION! An unlocked car is an invitation to thieves. Alwaysremove the key from the ignition and lock all thedoors when leaving the vehicle unattended. Manual Transmission 1. Turn the ignition switch to the ACC (Accessory)position. 2. Push the key and cylinder inward and rotate the key tothe LOCK po...

Locking Doors With The Key You can insert the key with either side up. To lock thedoor, turn the key to the right. To unlock the door, turnthe key to the left. Refer to “Body Lubrication” under“Maintenance Procedures” in Section 7. Key-In-Ignition Reminder Opening the driver’s door when the key is i...

At the time of purchase, the original owner is providedwith a four-digit Personal Identification Number (PIN).Keep the PIN in a secure location. This number isrequired for authorized dealer replacement of keys. Du-plication of keys may be performed at an authorizeddealer or by following the customer...

To Set The Security Alarm 1. Remove the key from the ignition switch and get outof the vehicle. 2. Lock the door using either the power door LOCKswitch or the Remote Keyless Entry (RKE) transmitterand close all doors. 3. The Vehicle Security Light in the instrument clusterwill flash rapidly for appr...

REMOTE KEYLESS ENTRY — IF EQUIPPED This system allows you to lock or unlock the doors andliftgate or activate the Panic Alarm from distances up toapproximately 66 ft (20 m) using a handheld RemoteKeyless Entry (RKE) transmitter. The RKE transmitterdoes not need to be pointed at the vehicle to activa...

To Unlock The Doors And Liftgate Press and release the UNLOCK button on the RKEtransmitter once to unlock the driver ’s door, or twicewithin five seconds to unlock all doors and liftgate. Theturn signal lights will flash to acknowledge the unlocksignal. The illuminated entry system will also turn on...

• For vehicles not equipped with the EVIC, perform thefollowing steps: 1. Press the LOCK button on a programmed RKE trans-mitter for at least 4 seconds, but no longer than 10 sec-onds. Then, press the PANIC button while still holdingthe LOCK button. 2. Release both buttons at the same time. 3. Test ...

• For vehicles not equipped with the EVIC, perform thefollowing steps: 1. Press and hold the UNLOCK button on a programmedRKE transmitter for at least 4 seconds, but no longer than10 seconds. Then, press and hold the LOCK button whilestill holding the UNLOCK button. 2. Release both buttons at the sa...

1. If the RKE transmitter is equipped with a screw,remove the screw. With the RKE transmitter buttonsfacing down, use a flat blade to pry the two halves of theRKE transmitter apart. Make sure not to damage theelastomer seal during removal. 2. Remove and replace the batteries. Avoid touching thenew b...

WARNING! • For personal security and safety in the event of anaccident, lock the vehicle doors as you drive aswell as when you park and leave the vehicle. (Continued) WARNING! (Continued) • When leaving the vehicle, always remove the keyfrom the ignition lock and lock your vehicle. Donot leave unatt...

NOTE: To prevent from locking the key in the vehicle, the power door lock switch will not operate when the keyis in the ignition and either front door is open. A chimewill sound as a reminder to remove the key. Automatic Door Locks — If EquippedThe doors will lock automatically on vehicles with powe...

NOTE: For emergency exit with the system engaged, move the lock plunger up (unlocked position), roll downthe window and open the door with the outside doorhandle. POWER WINDOWS — IF EQUIPPED Power Window Switches The window controls on the driver ’s door trim panelcontrol all the door windows. There...

controls on each passenger door trim panel, which oper-ate the passenger door windows. The window controlswill operate when the ignition switch is in the ON orACC position. NOTE: • For vehicles not equipped with the Electronic VehicleInformation Center (EVIC), the power windowswitches will remain ac...

Window Lockout Switch The window lockout switch on the driver’s door allowsyou to disable the window control on the other doors. Todisable the window controls on the other doors, press thewindow LOCKOUT switch. To enable the window con-trols, press the window LOCKOUT switch a second time. LIFTGATE N...

NOTE: • In the event of a power malfunction, or the RKEtransmitter is inoperative, insert the key into theliftgate lock cylinder and turn it to the right (manuallock models only). Using the liftgate handle, pull theliftgate open with one fluid motion. • Although the liftgate has no inside release me...

Gas props support the liftgate in the open position.However, because the gas pressure drops with tempera-ture, it may be necessary to assist the props whenopening the liftgate in cold weather. OCCUPANT RESTRAINTS Some of the most important safety features in yourvehicle are the restraint systems. Th...

WARNING! (Continued) • Wearing your belt in the wrong place could makeyour injuries in a collision much worse. You mightsuffer internal injuries, or you could even slide outof part of the belt. Follow these instructions towear your seat belt safely and to keep your pas-sengers safe, too. • Two peopl...

3. When the belt is long enough to fit, insert the latchplate into the buckle until you hear a “click.” WARNING! • A belt that is buckled into the wrong buckle willnot protect you properly. The lap portion couldride too high on your body, possibly causinginternal injuries. Always buckle your belt in...

WARNING! (Continued) • A belt that is worn under your arm is very danger-ous. Your body could strike the inside surfaces ofthe vehicle in a collision, increasing head and neckinjury. A belt worn under the arm can causeinternal injuries. Ribs aren’t as strong as shoulderbones. Wear the belt over your...

Adjustable Upper Shoulder Belt Anchorage In the front seat, the shoulder belt can be adjustedupward or downward to position the belt away fromyour neck. Push the anchorage button to release theanchorage, and move it up or down to the position thatfits you best. NOTE: The adjustable upper shoulder be...

9. To release the belt, push the red button on the buckle. 10. To disengage the mini-latch from the mini-buckle forstorage, insert the regular latch plate into the blackbutton on the top of the mini-buckle. The belt willautomatically retract to its stowed position. If necessary, slide the latch plat...

NOTE: Watch for the Seat Belt Reminder Light to turn on while unbuckling and off while re-buckling the seatbelt. It may be necessary to retract the seat belt. 4. Turn the ignition switch to the LOCK position. Asingle chime will sound to signify that you have success-fully completed the programming. ...

Driver And Front Passenger SupplementalRestraint System (SRS) — Airbag This vehicle has airbags for both the driver and frontpassenger as a supplement to the seat belt restraintsystems. The driver’s front airbag is mounted in thecenter of the steering wheel. The passenger’s front airbagis mounted in...

The front airbags have a multistage inflator design. Thismay allow the airbag to have different rates of inflationthat are based on collision severity. This vehicle may also be equipped with side curtainairbags to protect the driver and passengers sitting nextto a window. If the vehicle is equipped ...

4. If your vehicle has side airbags, do not lean againstthe door; airbags will inflate forcefully into the spacebetween you and the door. 5. If the airbag system in this vehicle needs to bemodified to accommodate a disabled person, contactthe Customer Center. Phone numbers are providedunder ⴖ If You...

• Supplemental Side Curtain Airbags Above Side Win-dows (If Equipped) • Steering Wheel and Column • Instrument Panel • Interconnecting Wiring • Seat Belt Reminder Light • Knee Impact Bolsters • Driver Inflatable Knee Blocker • Front Acceleration Sensors • Driver and Front Passenger Seat Belt Pretens...

Airbag Warning Light either momentarily or continu-ously. A single chime will sound if the light comes onagain after initial start up. WARNING! Ignoring the AIRBAG Warning Light in your instru-ment panel could mean you won’t have the airbags toprotect you in a collision. If the light does not comeon...

WARNING! Unapproved modifications or service procedures tothe front passenger seat assembly, its related compo-nents, or seat cover may inadvertently change theairbag deployment in case of a frontal crash. Thiscould result in death or serious injury to the frontseat passenger if the vehicle is invol...

Maintaining Your Airbag System WARNING! • Modifications to any part of the airbag systemcould cause it to fail when you need it. You couldbe injured because the airbags are not there toprotect you. Do not modify the components orwiring, including adding any kind of badges orstickers to the steering ...

Child Restraints Everyone in your vehicle needs to be buckled up all thetime, including babies and children. Every state in theUnited States and all Canadian provinces require thatsmall children ride in proper restraint systems. This is thelaw, and you can be prosecuted for ignoring it. Children 12 ...

Infants and Child RestraintsThere are different sizes and types of restraints forchildren from newborn size to the child almost largeenough for an adult safety belt. Always check the childseat owner’s manual to ensure you have the correct seatfor your child. Use the restraint that is correct for you...

around, and insert the latch plate into the buckleagain. If you still can’t make the child restraint secure,try a different seating position. • Buckle the child into the seat according to the childrestraint manufacturer’s directions. • When your child restraint is not in use, secure it in thevehicle...

Your vehicle is equipped with the child restraint anchor-age system called LATCH. The LATCH system providesfor the installation of the child restraint without using thevehicle seat belt. All three rear seating positions havelower anchorages that are capable of accommodatingLATCH-compatible child sea...

provide add-on tether strap kits for some of their olderproducts. Tether anchorage kits are also available formost older vehicles. Because the lower anchorages are to be introduced topassenger carrying vehicles over a period of years, childrestraint systems having attachments for those anchor-ages w...

In general, you will first loosen the adjusters on the lowerand tether straps so that you can more easily attach thehook or connector to the lower and tether anchorages.The tether strap should be routed under the center of thehead restraint and attached to the tether anchor on therear of the seat ba...

WARNING! An incorrectly anchored tether strap could lead toincreased head motion and possible injury to thechild. Use only the anchor position directly behindthe child seat to secure a child restraint top tetherstrap. Children Too Large For Booster SeatsChildren who are large enough to wear the shou...

Exhaust Gas WARNING! Exhaust gases can injure or kill. They contain carbonmonoxide (CO), which is colorless and odorless.Breathing it can make you unconscious and caneventually poison you. To avoid breathing (CO)follow these safety tips: Do not run the engine in a closed garage or in confinedareas a...

UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS 䡵 Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 ▫ Inside Day/Night Mirror . . . . . . . . . . . . . . . . 79 ▫ Automatic Dimming Inside Mirror — IfEquipped . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 ▫ Outside ...

䡵 Voice Recognition System (VR) —If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . 112 ▫ Voice Recognition System (VR) Operation . . . 112 ▫ Commands . . . . . . . . . . . . . . . . . . . . . . . . 114 ▫ Voice Training . . . . . . . . . . . . . . . . . . . . . . 117 䡵 Seats . . . . . ....

MIRRORS Inside Day/Night Mirror A two-point pivot system allows for horizontal andvertical mirror adjustment. Adjust the mirror to center onthe view through the rear window. Headlight glare can be reduced by moving the smallcontrol under the mirror to the night position (toward therear of vehicle). ...

Automatic Dimming Inside Mirror — If Equipped This mirror automatically adjusts for headlight glarefrom vehicles behind you. You can turn the feature on oroff by pressing the button at the base of the mirror. A lightnext to the button will illuminate to indicate when thedimming feature is activated....

WARNING! Vehicles and other objects seen in the passenger sideconvex mirror will look smaller and farther awaythan they really are. Relying too much on yourpassenger side mirror could cause you to collide withanother vehicle or other object. Use your insidemirror when judging the size or distance of...

To adjust a mirror, turn the control wand toward the leftor right mirror positions indicated. Tilt the control wandin the direction you want the mirror to move. Whenfinished adjusting the mirror, turn the control to thecenter position to prevent accidentally moving a mirror. WARNING! Vehicles and ot...

Vanity Mirrors — If Equipped To use the vanity mirror, rotate the sun visor down andswing the mirror cover upward. Sun Visor Sliding Feature The sun visors may be extended out to provide morecoverage of the side glass. uconnect 姞 phone — IF EQUIPPED NOTE: The sales code RER and REU radios contain an...

Phone Button The rearview mirror contains the microphonefor the system (depending on the type ofmirror and radio equipped), and either theradio or the mirror has the two control buttons (PHONE Button and VOICE RECOGNITION button)that will enable you to access the system. Voice Recognition Button Act...

• For certain operations, compound commands can beused. For example, instead of saying ⬙ Setup ⬙ and then ⬙ Phone Pairing, ⬙ the following compound command can be said: ⬙ Setup Phone Pairing. ⬙ • For each feature explanation in this section, only thecombined form of the voice command is given. Youca...

Phone Call Features The following features can be accessed through theuconnect 威 phone if the feature(s) are available on your cellular service plan. For example, if your cellular serviceplan provides three-way calling, this feature can beaccessed through the uconnect 威 phone. Check with your cellul...

• If supported, this number may be programmable onsome systems. To do this, press the PHONE buttonand say ‘Setup’, followed by ‘Emergency’. • The uconnect 威 phone does slightly lower your chances of successfully making a phone call as to that for thecell phone directly. WARNING! Your phone must be t...

If you would like to connect or disconnect the Bluetooth 威 connection between a uconnect 威 phone paired cellular phone and the uconnect 威 phone, follow the instructions described in your cellular phone User’s Manual. List Paired Cellular Phone Names • Press the PHONE button to begin. • After the “Re...

• It is not recommended to store similar soundingnames in the uconnect 威 phonebook. • Phonebook (Downloaded and uconnect 威 phone Local) name recognition rate is optimized when the entriesare not similar. • You can say ⬙ O ⬙ (letter ⬙ O ⬙ ) for ⬙ 0 ⬙ (zero). ⬙ 800 ⬙ must be spoken ⬙ eight-zero-zero. ...

General Information This device complies with Part 15 of the FCC rules andRSS 210 of Industry Canada. Operation is subject to thefollowing conditions: • Changes or modifications not expressly approved bythe party responsible for compliance could void theuser’s authority to operate the equipment. • T...

NOTE: Keep in mind that you have to press the VR button first and wait for the beep before speaking the“Barge In” commands. Voice Training For users experiencing difficulty with the system recog-nizing their voice commands or numbers, uconnect 威 phone Voice Training feature may be used. 1. Press the...

Using body pressure, move forward and rearward on theseat to be sure the seat adjusters have latched. WARNING! • Adjusting a seat while the vehicle is moving isdangerous. The sudden movement of the seatcould cause you to lose control. The seat belt mightnot be properly adjusted and you could be inju...

Manual Lumbar — If Equipped The lumbar adjustment handle is located on the outboardside of the driver’s seat. To increase or decrease support,rotate the handle up or down. Driver’s Seatback Recline To recline: 1. Lean forward before lifting the handle, then lean backto the desired position and relea...

Adjustable Head Restraints Head restraints can reduce the risk of whiplash injury inthe event of impact from the rear. Pull up or push downon the head restraints so that the upper edge is as high aspractical. To raise the head restraint, pull up on the headrestraint. To lower the head restraint, pre...

Fold-Flat Front Passenger Seat To fold the front passenger seat, lift the recliner handle tothe full upward position and push the seatback forwarduntil it rests on the seat cushion. Fold-Flat Front Passenger Seat Handle Front Passenger Seat Folded Flat 122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Folding Rear Seat To provide additional storage area, each rear seatback canbe folded forward. Pull the strap forward to move theseat forward and flat. Folding Rear Seat Rear Seat Folded Flat UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123 3

Reclining Rear Seat — If Equipped For additional comfort, pull the strap forward justenough to release the seatback latch. Then push the seatback to a reclined position, approxi-mately 35 degrees maximum, and release the strap. WARNING! • It is extremely dangerous to ride in a cargo area,inside or o...

Fog Lights — If Equipped The front fog light switch is on the multifunctionlever. To activate the front fog lights, turn on theparking lights or the low beam headlights and pull out the end of the multifunction lever. NOTE: The fog lights will only operate with the head- lights on low beam. Selectin...

If either light remains on and does not flash, or there is avery fast flash rate, check for a defective outside lightbulb. If an indicator fails to light when the multifunctionlever is moved, it would suggest that the fuse or indicatorbulb is defective. High Beam/Low Beam Select Switch Push the mult...

Daytime Running Lights (DRL) — If Equipped The high beam headlights will come on as DaytimeRunning Lights (DRL) at DRL intensity, which is a lowerintensity then the normal high beams. The DRL’s willcome on whenever the ignition is ON, the engine isrunning, the headlight switch is off, the parking br...

Intermittent Wiper System Use the intermittent wiper when weather conditionsmake a single wiping cycle, with a variable pause be-tween cycles, desirable. Select the delay interval byturning the end of the lever. Rotate the knob upward(clockwise) to decrease the delay time and downward(counterclockwi...

Mist Feature Push down on the wiper control lever to activate a singlewipe to clear the windshield of road mist or spray froma passing vehicle. As long as the lever is held down, thewipers will continue to operate. CAUTION! In cold weather, always turn off the wiper switch andallow the wipers to ret...

TILT STEERING COLUMN To tilt the steering column, push down on the lever belowthe multifunction lever. With one hand firmly on thewheel, move the steering column up or down as desired.Push the lever back up to lock the column firmly in place. WARNING! Tilting the steering column while the vehicle is...

NOTE: The Electronic Speed Control system has been designed to shut down if multiple speed control switchfunctions are operated simultaneously in order to ensureproper operation. If this occurs, the system can be reactivated by pushing the Electronic Speed Controlswitch ON/OFF button and resetting t...

To Set At A Desired Speed When the vehicle has reached the desired speed, pressdown on the Electronic Speed Control lever and release.Release the accelerator and the vehicle will operate at theselected speed. NOTE: The vehicle should be traveling at a steady speed and on level ground before pressing...

Tapping the SET DECEL button once will result in a1 mph (1.6 km/h) speed decrease. Each time the button istapped, speed decreases. Manual Transaxle Pressing the clutch pedal will disengage the speed con-trol. A slight increase in engine RPM before the ElectronicSpeed Control disengages is normal. Ve...

On steep hills, a greater speed loss or gain may occur soit may be preferable to drive without Electronic SpeedControl. GARAGE DOOR OPENER — IF EQUIPPED HomeLink 威 replaces up to three remote controls (hand- held transmitters) that operate devices such as garagedoor openers, motorized gates, lightin...

WARNING! • Your motorized door or gate will open and closewhile you are training the Universal Transceiver.Do not train the transceiver if people or pets are inthe path of the door or gate. Only use this trans-ceiver with a garage door opener that has a “stopand reverse” feature as required by Feder...

Gate Operator/Canadian Programming Canadian radio-frequency laws require transmitter sig-nals to “time-out” (or quit) after several seconds oftransmission – which may not be long enough forHomeLink 威 to pick up the signal during programming. Similar to this Canadian law, some U.S. gate operators are...

General Information This device complies with FCC rules Part 15 and IndustryCanada RSS-210. Operation is subject to the followingtwo conditions: 1. This device may not cause harmful interference 2. This device must accept any interference that may bereceived including interference that may cause und...

WARNING! • Never leave children in a vehicle, with the key inthe ignition switch. Occupants, particularly unat-tended children, can become entrapped by thepower sunroof while operating the power sunroofswitch. Such entrapment may result in seriousinjury or death. • In an accident, there is a greater...

Closing the Sunroof Manual ModeTo close the sunroof, press and hold the switch in theforward position. Again, any release of the switch willstop the movement and the sunroof will remain in apartial close condition until the switch is pushed andheld forward again. To ensure sunroof is fully closed,pr...

Venting Sunroof — Express Press and hold the “Vent” button, and the sunroof willopen to the vent position. This is called “Express Vent”,and will occur regardless of the sunroof position. DuringExpress Vent operation, any movement of the switch willstop the sunroof. Sunshade Operation The sunshade c...

ELECTRICAL POWER OUTLETS There is a standard 12-Volt power outlet located in theinstrument panel for added convenience. This outlet canpower cell phones, electronics and other low powerdevices. Power Outlet 12-Volts 148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

POWER INVERTER — IF EQUIPPED A 115-Volt (150-Watt) AC power inverter is located on therear of the center console for added convenience. Thisoutlet can power cellular phones, electronics and otherlow power devices requiring power up to 150 Watts.Certain high-end video games, such as Playstation3 andX...

CUPHOLDERS Your vehicle is equipped with four cupholders. There aretwo cupholders located in the front. There are two cupholders behind the center console forrear passengers. CONSOLE FEATURES The floor console’s sliding armrest moves forward 3 in(76.2 mm) to accommodate shorter drivers. The armrestl...

WARNING! Do not operate this vehicle with the console compart-ment lid in the open position. Cell phones, musicplayers, and other handheld electronic devicesshould be stowed while driving. Use of these deviceswhile driving can cause an accident due to distrac-tion, resulting in death or injury. NOTE...

CARGO AREA FEATURES Cargo Light/Removable Self-RechargingFlashlight — If Equipped The dual-function light is mounted in the headlinerabove the cargo area to illuminate the cargo area, andpart of it snaps out of the bezel to serve as a flashlightwhen needed. The flashlight features two bright LEDligh...

To operate the flashlight, press the switch once for high,twice for low, and a third time to return to off. Cargo Cover — If Equipped The cargo area trim panels include two notches formounting the available tonneau cover that accommo-dates the reclining rear seat. To install the Cargo Cover, insert ...

Using the handle, pull the cover toward you and guidethe rear cover posts into the guides located on both sidesof the rear trim panel. WARNING! In an accident a cargo cover loose in the vehicle couldcause injury. It could fly around in a sudden stop andstrike someone in the vehicle. Do not store the...

Cargo Tie-Down Loops There are two D-rings installed in the cargo area forsecuring cargo. WARNING! • Cargo tie-down loops are not safe anchors for achild seat tether strap. In a sudden stop or collisiona loop could pull loose and allow the child seat tocome loose. A child could be badly injured. Use...

activate the wiper. The rear wiper operates in an inter-mittent mode only. Rotating the center of the switch allthe way forward will turn on the wash function. Thewash pump will continue to operate as long as the buttonis pressed. Upon release, the wipers will cycle two timesbefore returning to the ...

approximately 10 minutes. For an additional five minutesof operation, press the switch a second time. To preventexcessive battery drain, use the defroster only when theengine is operating. CAUTION! Use care when washing the inside of the rear windowto prevent damage to heating elements. Use a softcl...

NOTE: The use of the Cooled Beverage Storage Bin is for nonperishable beverages only. To operate the beverage cooler, pull the slide controlabout 0.5 in (12 mm) toward the passenger compartment.This will allow cool air to enter the beverage cooler. Toshut off the beverage cooler when not in use, pus...

UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS 䡵 Instrument Panel Features . . . . . . . . . . . . . . . 166 䡵 Instrument Cluster – Base . . . . . . . . . . . . . . . 167 䡵 Instrument Cluster – Premium . . . . . . . . . . . . 168 䡵 Instrument Cluster Descriptions . . . . . . . . . . . 169 䡵 Electronic...

INSTRUMENT PANEL FEATURES 1 - Air Outlet 5 - Upper Glove Compartment 9 - Heated Seat Switches – If Equipped 2 - Demisters 6 - Lower Glove Compartment/Beverage Cooler – If Equipped 10 - Hazard Warning Flasher 3 - Instrument Cluster 7 - Storage Bins 11 - ESP OFF Switch – If Equipped 4 - Radio 8 - Clim...

INSTRUMENT CLUSTER – BASE UNDERSTANDING YOUR INSTRUMENT PANEL 167 4

INSTRUMENT CLUSTER – PREMIUM 168 UNDERSTANDING YOUR INSTRUMENT PANEL

INSTRUMENT CLUSTER DESCRIPTIONS 1. Fuel GaugeWhen the ignition switch is in the ON position, thepointer will show the level of fuel remaining in the fueltank. 2. Fuel Door Reminder This indicates that the fuel filler door is locatedon the left side of the vehicle. 3. Temperature GaugeThe temperature...

WARNING! A hot engine cooling system is dangerous. You orothers could be badly burned by steam or boilingcoolant. You may want to call an authorized dealer-ship for service if your vehicle overheats. If youdecide to look under the hood yourself, see Section 7of this manual. Follow the warnings under...

CAUTION! The TPMS has been optimized for the originalequipment tires and wheels. TPMS pressures andwarning have been established for the tire sizeequipped on your vehicle. Undesirable system opera-tion or sensor damage may result when using re-placement equipment that is not of the same size,type, a...

means the engine oil change interval may fluctuatedependent upon your personal driving style. Unless reset, this message will continue to display eachtime you turn the ignition switch to the ON/RUNposition. To turn off the message temporarily, press andrelease the Trip Odometer button on the instrum...

17. Cruise Indicator — If Equipped This indicator shows that the Speed Controlsystem is ON. 18. Trip/Odometer Display Reset ButtonPress this button to change the display from odometer toeither of the two trip odometer settings. Trip A or Trip Bwill appear when in the trip odometer mode. Push in andh...

28. Electronic Vehicle Information Center Display — IfEquippedWhen the appropriate conditions exist, this displayshows the Electronic Vehicle Information Center (EVIC)messages. Refer to the Electronic Vehicle Information Center (EVIC)in this section for more information. 29. Transmission Temperature...

• Gate Ajar (with a single chime) • Headlights On • Key In Ignition • Check TPM System • Oil Change Required Oil Change Required Your vehicle is equipped with an engine oil changeindicator system. The “Change Oil” message will flash inthe instrument cluster odometer for approximately 5 sec-onds afte...

EVIC Functions Press the EVIC button until one of the following func-tions are displayed on the EVIC: • Compass/Temperature/Audio • Average Fuel Economy • Distance To Empty (DTE) • Elapsed Time • Tire Pressure Monitor (TPM) • Personal Settings To Reset The DisplayPressing and holding the EVIC button...

Compass/Temperature/Audio Press and release the EVIC button to display one of eightcompass headings to indicate the direction the vehicle isfacing, the outside temperature and the current radiostation. For additional information regarding the compass, referto “Personal Settings (Customer Programmabl...

Elapsed Time Shows the total elapsed time of travel since the last resetwhen the ignition switch is in the ACC position. Elapsedtime will increment when the ignition switch is in the ONor START position. Tire Pressure Monitor (TPM) Refer to “Tire Pressure Monitoring System (TPMS)”under “Starting and...

NOTE: A good calibration requires a level surface and an environment free from large metallic objects such asbuildings, bridges, underground cables, railroad tracks,etc Compass VarianceCompass Variance is the difference between MagneticNorth and Geographic North. To ensure compass accu-racy, the com...

calibration mode. The CAL indicator will come on con-tinuously in the EVIC display to indicate that the com-pass is now in the calibration mode, and that the vehiclecan now be driven to calibrate. 5. To complete the compass calibration, drive the vehiclein one or more complete 360–degree circle unde...

Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/Volume Control (Rotary)Push the ON/VOLUME control knob to turn on theradio. Press the ON/VOLUME control knob a secondtime to turn off the radio. Electronic Volume Contro...

Phone Button uconnect 威 phone — If Equipped Press this button to operate the uconnect 威 phone feature (if equipped). Refer to “uconnect 威 phone” in Section 3. If your vehicle is not equipped with or this feature is notavailable on your vehicle, a “Not Equipped Withuconnect” message will display on t...

The disc can be ejected with the radio and ignition OFF. SEEK Button (CD MODE)Press the right SEEK button for the next selection on theCD. Press the left SEEK button to return to the beginningof the current selection, or return to the beginning of theprevious selection if the CD is within the first ...

Pressing the AUX button will change the mode to auxil-iary device if the AUX jack is connected. NOTE: The AUX device must be turned on and the device’s volume set to the proper level. If the AUX audiois not loud enough, turn the device’s volume up. If theAUX audio sounds distorted, turn the device’s...

Operating Instructions - uconnect 威 studios (Satellite Radio) (If Equipped)Refer to “uconnect 威 studios (Satellite Radio)” in this section. Operating Instructions - Video EntertainmentSystem (VES)™ (If Equipped)Refer to separate “Video Entertainment System (VES)™Guide.” Dolby 威 Manufactured under li...

Refer to your uconnect 威 tunes (REN) or (RER) user’s manual for detailed operating instructions. Operating Instructions — Voice RecognitionSystem (VR) — If Equipped For the radio, refer to “Voice Recognition System (VR)” inSection 3. Operating Instructions — uconnect 姞 phone — If Equipped Refer to “...

Changing the Time Zone 1. Turn on the radio. 2. Touch the screen where the time is displayed. Theclock setting menu will appear on the screen. 3. Touch the screen where the words “Set Time Zone” aredisplayed. The time zone selection menu will appear onthe screen. 4. Select a time zone by touching th...

EJECT Button - Ejecting a CD Press the EJECT button to eject the CD. If you have ejected a disc and have not removed it within10 seconds, it will be reloaded. If the CD is not removed,the radio will reinsert the CD but will not play it. A disc can be ejected with the radio and ignition OFF. NOTE: Ej...

SET/RND Button (Random Play Button)Press this button while the CD is playing to activateRandom Play. This feature plays the selections on thecompact disc in random order to provide an interestingchange of pace. Press the right SEEK button to move to the next ran-domly selected track. Press the RND b...

MPEG Specification Sampling Frequency (kHz) Bit Rate (kbps) MPEG-1 Audio Layer 3 48, 44.1, 32 320, 256, 224,192, 160, 128, 112, 96, 80, 64, 56, 48, 40, 32 MPEG-2 Audio Layer 3 24, 22.05, 16 160, 128, 144, 112, 96, 80, 64, 56, 48, 40, 32, 24, 16, 8 ID3 Tag information for artist, song title, and albu...

Operation Instructions - Auxiliary Mode The auxiliary (AUX) jack is an audio input jack, whichallows the user to plug in a portable device, such as anMP3 player, or cassette player, and utilize the vehicle’saudio system to amplify the source and play through thevehicle speakers. Pressing the DISC/AU...

Operating Instructions — Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/Volume Control (Rotary)Push the ON/VOLUME control knob to turn on theradio. Push the ON/VOLUME control knob a secondtime to turn off the radio. Electronic Volume Control...

By pressing the SEEK button when the Music Type iconis displayed, the radio will be tuned to the next frequencystation with the same selected Music Type name. TheMusic Type function only operates when in the FMmode. If a preset button is activated while in the Music Type(Program Type) mode, the Musi...

RW/FFPress and hold FF (Fast Forward) and the CD player willbegin to fast forward until FF is released or RW oranother CD button is pressed. The RW (Reverse) buttonworks in a similar manner. AM/FM ButtonPress the button to select either AM or FM mode. SET/RND Button (Random Play Button)Press this bu...

TIME Button (Auxiliary Mode)Press this button to change the display to time of day. Thetime of day will display for five seconds (when theignition is OFF). Operating Instructions - uconnect 威 phone (If Equipped)Refer to “uconnect 威 phone” in Section 3. Operating Instructions - uconnect 威 studios (Sa...

Electronic Serial Number/Sirius IdentificationNumber (ESN/SID) Please have the following information available whencalling: 1. The Electronic Serial Number/Sirius IdentificationNumber (ESN/SID). 2. Your Vehicle Identification Number. To access the ESN/SID, refer to the following steps: ESN/SID Acces...

Operating Instructions — uconnect 姞 phone (If Equipped) Refer to “uconnect 威 phone” in Section 3. Operating Instructions — Video EntertainmentSystem (VES)™ (If Equipped) Refer to separate “Video Entertainment System (VES)™Guide.” REMOTE SOUND SYSTEM CONTROLS — IFEQUIPPED The remote sound system cont...

3. Do not apply paper or tape to the disc; avoid scratch-ing the disc. 4. Do not use solvents such as benzene, thinner, cleaners,or antistatic sprays. 5. Store the disc in its case after playing. 6. Do not expose the disc to direct sunlight. 7. Do not store the disc where temperatures may becometoo ...

The air conditioning system of your vehicle containsR-134a, a refrigerant that does not deplete the ozone layerin the upper atmosphere. The controls are as follows: Mode Control (Air Direction) The mode control allows you tochoose from several patterns of airdistribution as identified by thesymbols....

NOTE: For maximum airflow to the rear seat passen- gers, the center instrument panel outlets can be aimed, sothat the left center outlet is directed toward the right rearpassenger and the right center outlet is directed towardthe left rear passenger. Fan Control Use this control to regulate theamoun...

Circulation Control Use this button to choose betweenoutside air intake or recirculationof the air inside the vehicle. Alight will illuminate when you arein recirculate mode. Only use therecirculate mode to temporarilyblock out any outside odors,smoke, or dust and to cool theinterior rapidly upon in...

Air Conditioning (MAX A/C) For maximum cooling select theair direction to either the Panel orBi-Level position using the modecontrol. Press the A/C button andthe recirculation button so thatboth lights are illuminated and setthe temperature control to itscoolest setting. NOTE: • Recirculation Mode w...

Operating Tips 242 UNDERSTANDING YOUR INSTRUMENT PANEL

Window FoggingVehicle side windows tend to fog on the inside in mildrainy or humid weather. To clear the windows, set modeto the mix or defrost position. Direct the panel outletstoward the side windows. Do not use recirculate withoutA/C for long periods as fogging may occur. Interior fogging on the ...

STARTING AND OPERATING CONTENTS 䡵 Starting Procedures . . . . . . . . . . . . . . . . . . . . 249 ▫ Manual Transmission — If Equipped . . . . . . 249 ▫ Automatic Transmission — If Equipped . . . . 249 ▫ Normal Starting . . . . . . . . . . . . . . . . . . . . . 249 ▫ Extremely Cold Weather (Below ⫺ 2...

▫ Loose Fuel Filler Cap Message . . . . . . . . . . . 307 䡵 Vehicle Loading . . . . . . . . . . . . . . . . . . . . . . 307 ▫ Vehicle Certification Label . . . . . . . . . . . . . . 308 䡵 Trailer Towing . . . . . . . . . . . . . . . . . . . . . . . . 310 ▫ Common Towing Definitions . . . . . . . . ....

STARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust bothinside and outside mirrors, and fasten your seat belts. WARNING! Never leave children alone in a vehicle. Leavingunattended children in a vehicle is dangerous for anumber of reasons. A child or others could be seri-ously ...

Fully depress the clutch pedal before you shift gears. Asyou release the clutch pedal, lightly depress the accelera-tor pedal. Use each gear in numerical order, do not skip a gear. Besure the transaxle is in 1st gear, (not 3rd), when startingfrom a standing position. Damage to the clutch can resultf...

CAUTION! Damage to the transaxle may occur if the followingprecautions are not observed: • Shift into PARK only after the vehicle has come toa complete stop. • Shift into or out of REVERSE only after thevehicle has come to a complete stop and the engineis at idle speed. • Do not shift from REVERSE, ...

NOTE: If a malfunction occurs, the transaxle will not shift out of PARK. Battery power is required to release thebrake/transmission interlock system. There is a remov-able plug in the right side of the shifter housing thatallows you to insert your finger to override the system. Ifthis occurs, obtain...

REVERSEShift into this range only after the vehicle has come to acomplete stop. NEUTRALThe engine may be started in this range. DRIVEThis should be used for most driving and provides thebest ratio for optimum drivability, fuel economy, andperformance. AUTOSTICK 姞 — IF EQUIPPED Autostick 威 is a drive...

• If the system detects powertrain overheating, thetransmission will revert to the automatic shift modeand remain in that mode until the powertrain cools off. • If the system detects a problem, it will disable theAutostick 威 mode and the transmission will return to the automatic mode until the probl...

2. Slow down if the road has standing water or puddles. 3. Replace the tires when tread wear indicators firstbecome visible. 4. Keep the tires properly inflated. 5. Maintain enough distance between your vehicle andthe vehicle in front of you to avoid a collision in a suddenstop. DRIVING THROUGH WATE...

WARNING! • Driving through standing water limits your vehi-cle’s traction capabilities. Do not exceed 5 mph(8 km/h) when driving through standing water. • Driving through standing water limits your vehi-cle’s braking capabilities, which increases stop-ping distances. Therefore, after driving through...

WARNING! Continued operation with reduced power steeringassist could pose a safety risk to yourself and others.Service should be obtained as soon as possible. CAUTION! Prolonged operation of the steering system at the endof the steering wheel travel will increase the steeringfluid temperature and it...

PARKING BRAKE When the parking brake is applied with the ignition ON,the Brake Light in the instrument cluster will come on. NOTE: This light only shows that the parking brake is on. It does not show the degree of brake application. If the parking brake is applied while the vehicle ismoving, a chime...

As an added precaution, turn the front wheels toward thecurb on a downhill grade and away from the curb on auphill grade. You should always apply the parking brake before leav-ing the vehicle. WARNING! • Never leave children alone in a vehicle. Leavingunattended children in a vehicle is dangerous fo...

ABS is activated during braking under certain road orstopping conditions. ABS-inducing conditions can in-clude ice, snow, gravel, bumps, railroad tracks, loosedebris, or panic stops. You may also experience the following when the brakesystem goes into Anti-Lock mode: • the ABS motor running (it may ...

ESP Operating ModesThe ESP system has two available operating modes. Full OnThis is the normal operating mode for ESP. Whenever thevehicle is started the ESP system will be in this “On”mode. This mode should be used for most drivingsituations. ESP should only be turned to “Partial Off” forspecific r...

TIRE SAFETY INFORMATION Tire Markings NOTE: • P (Passenger) - Metric tire sizing is based on U.S.design standards. P-Metric tires have the letter “P”molded into the sidewall preceding the size designa-tion. Example: P215/65R15 95H. • European-Metric tire sizing is based on Europeandesign standards. ...

Tire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standards ⴖ ....blank.... ⴖ = Passenger car tire based on European design standards LT = Light truck tire based on U.S. design standards T = Temporary spare tire 31 = Overall diameter in inches (in) 215 = S...

EXAMPLE: Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions— The maximum speed corresp...

Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire,however, the date code may only be on one side. Tireswith white sidewalls will have the full TIN, including thedate code, located on the white sidewall side of the tire. Look for the TIN on the outboard side of bl...

Tire Loading and Tire Pressure Tire Placard Location NOTE: The proper cold tire inflation pressure is listed on the driver’s side B-Pillar. Tire and Loading Information Placard This placard tells you important information aboutthe:1) number of people that can be carried in the vehicle2) total weight...

axles must not be exceeded. For further information onGAWRs, vehicle loading, and trailer towing, refer to“Vehicle Loading” in this section. To determine the maximum loading conditions of yourvehicle, locate the statement “The combined weight ofoccupants and cargo should never exceed XXX lbs orXXX k...

WARNING! (Continued) • Unequal tire pressures from one side of the ve-hicle to the other can cause the vehicle to drift tothe right or left. • Always drive with each tire inflated to the recom-mended cold tire inflation pressure. EconomyImproper inflation pressures can cause uneven wearpatterns to d...

CAUTION! After inspecting or adjusting the tire pressure, al-ways reinstall the valve stem cap (if equipped). Thiswill prevent moisture and dirt from entering thevalve stem, which could damage the valve stem. Inflation pressures specified on the placard are always“cold tire inflation pressure.” Cold...

vehicle only. Since this tire has limited tread life, theoriginal tire should be repaired (or replaced) and rein-stalled at the first opportunity. WARNING! • Temporary use spare tires are for emergency useonly. With these tires, do not drive more than50 mph (80 km/h). • Temporary-use spare tires hav...

These indicators are molded into the bottom of the treadgrooves. They will appear as bands when the tread depthbecomes 1/16 in (2 mm). When the tread is worn to thetread wear indicators, the tire should be replaced. Many states have laws requiring tire replacement at thispoint. Life of Tire The serv...

Keep dismounted tires in a cool, dry place with as littleexposure to light as possible. Protect tires from contactwith oil, grease, and gasoline. Replacement Tires The tires on your new vehicle provide a balance of manycharacteristics. They should be inspected regularly forwear and correct cold tire...

TIRE ROTATION RECOMMENDATIONS Tires on the front and rear axles of vehicles operate atdifferent loads and perform different steering, driving,and braking functions. For these reasons, they wear atunequal rates and tend to develop irregular wear pat-terns. These effects can be reduced by timely rotat...

NOTE: • The TPMS is not intended to replace normal tire careand maintenance or to provide warning of a tire failureor condition. • The TPMS should not be used as a tire pressure gaugewhile adjusting your tire pressure. • Driving on a significantly under-inflated tire causesthe tire to overheat and c...

1. The compact spare tire does not have a tire pressuremonitoring sensor. Therefore, the TPMS will not monitorthe tire pressure in the compact spare tire. 2. If you install the compact spare tire in place of a roadtire that has a pressure below the low-pressure warninglimit, upon the next ignition k...

The TPMS consists of the following components: • Receiver Module • Four Tire Pressure Monitoring Sensors • Three Trigger Modules (mounted in three of the fourwheel wells) • Various Tire Pressure Monitoring System Messages,which display in the Electronic Vehicle InformationCenter (EVIC) • Yellow Tire...

display to the vehicle’s recommended cold placard pres-sure value. The system will automatically update, thegraphic display of the pressure value(s) will stop flash-ing, and the Tire Pressure Monitoring Light will extin-guish once the updated tire pressure(s) have been re-ceived. The vehicle may nee...

limit in any of the four active road tires. The vehicle mayneed to be driven for up to 20 minutes above 15 mph(25 km/h) in order for the TPMS to receive thisinformation. General Information This device complies with Part 15 of the FCC rules andRSS 210 of Industry Canada. Operation is subject to thef...

If a Non-FFV vehicle is inadvertently fueled with E-85fuel, the engine will have some or all of these symptoms: • operate in a lean mode • OBD II “Malfunction Indicator Light” on • poor engine performance • poor cold start and cold drivability • increased risk for fuel system component corrosion To ...

MMT is prohibited in Federal and California reformu-lated gasolines. Materials Added To Fuel All gasoline sold in the United States is required tocontain effective detergent additives. Use of additionaldetergents or other additives is not needed under normalconditions and would result in additional ...

After removing the gas cap, place the gas cap tether cableover a hook on the inside of the fuel door. This keeps thegas cap suspended away from and protects the vehicle’ssurface. CAUTION! • A poorly fitting gas cap may cause the Malfunc-tion Indicator Light (MIL) to turn on. • To avoid fuel spillage...

NOTE: Tighten the gas cap about 1/4 turn until you hear one click. This is an indication that cap is properlytightened. If the gas cap is not tighten properly, the MIL will comeon. Be sure the gas cap is tightened every time the vehicleis refueled. WARNING! A fire may result if gasoline is pumped in...

Vehicle Certification Label Your vehicle has a Vehicle Certification Label attached tothe driver’s door B-Pillar. The label contains the following information: • Name of manufacturer • Month and year of manufacture • Gross Vehicle Weight Rating (GVWR) • Vehicle Identification Number (VIN) • Type of ...

TRAILER TOWING In this section, you will find safety tips and informationon limits to the type of towing you can reasonably dowith your vehicle. Before towing a trailer carefully re-view this information to tow your load as efficiently andsafely as possible. To maintain warranty coverage, follow the...

Trailer Hitch Classification Definitions Class Max. Trailer Hitch Industry Standards Class I - Light Duty 2,000 lbs (907 kg) Refer to the “Trailer Towing Weights (MaximumTrailer Weight Ratings)” chart for the MaximumGross Trailer Weight (GTW) towable for your givendrivetrain. All trailer hitches sho...

Note 1 – The trailer tongue weight must be considered aspart of the combined weight of occupants and cargo andshould never exceed the weight referenced on the Tireand Loading Information placard. Refer to “Tire–SafetyInformation” under “Starting and Operating” inSection 5. Trailer And Tongue Weight ...

NOTE: Remember that everything put into or on the trailer adds to the load on your vehicle. Also, additionalfactory-installed options, or dealer-installed options,must be considered as part of the total load on yourvehicle. Refer to the “Tire and Loading Informationplacard” under “Tire Safety Inform...

CAUTION! If the trailer weighs more than 1,000 lbs (450 kg)loaded, it should have its own brakes and theyshould be of adequate capacity. Failure to do thiscould lead to accelerated brake lining wear, higherbrake pedal effort, and longer stopping distances. WARNING! • Do not connect trailer brakes to...

Towing Tips Before setting out on a trip, practice turning, stoppingand backing the trailer in an area away from heavytraffic. If using a manual transmission vehicle for trailer towing,all starts must be in 1st gear to avoid excessive clutchslippage. Electronic Speed Control — If Equipped − Do not u...

WHAT TO DO IN EMERGENCIES CONTENTS 䡵 Hazard Warning Flasher . . . . . . . . . . . . . . . . 324 䡵 If Your Engine Overheats . . . . . . . . . . . . . . . . 324 䡵 Automatic Transaxle Overheating . . . . . . . . . . 325 䡵 Jacking And Tire Changing . . . . . . . . . . . . . . . 326 ▫ Jack Location . . ....

HAZARD WARNING FLASHER The Hazard Warning flasher switch is located on theinstrument panel, below the radio. Press the switch to turn on the Hazard Warningflashers. When the Hazard Warning flasher switchis activated, all directional turn signals will flash on and off to warn oncoming traffic of an e...

the engine cooling system and turning off the A/Cremoves this heat. You can also turn the Temperaturecontrol to maximum heat, the Mode control to floor, andthe fan control to high. This allows the heater core to actas a supplement to the radiator and aids in removing heatfrom the engine cooling syst...

requested speed. If the high speed is maintained, theoverheating will reoccur, as before, in a cyclic fashion. JACKING AND TIRE CHANGING WARNING! • Being under a jacked-up vehicle is dangerous. Thevehicle could slip off the jack and fall on you. Youcould be crushed. Never put any part of your bodyun...

Spare Tire RemovalLift up the load floor cover and remove the hold down. Preparations For Jacking 1. Park the vehicle on a firm level surface, avoiding ice orslippery areas. WARNING! Do not attempt to change a tire on the side of thevehicle close to moving traffic. Pull far enough offthe road to avo...

WARNING! (Continued) • Always park on a firm, level surface as far fromthe edge of the roadway as possible before raisingthe vehicle. • Block the wheel diagonally opposite the wheel tobe raised. • Set the parking brake firmly and set an automatictransmission in PARK; a manual transmission inREVERSE....

2. Loosen, but do not remove, the wheel nuts by turningthem to the left one turn while the wheel is still on theground. CAUTION! Do not attempt to raise the vehicle by jacking onlocations other than those indicated in Step 3. 3. There are two front jacking locations and two rearjacking locations on ...

9. Remove the wheel blocks and lower the jack until it isfree. Reassemble the lug wrench to the jack assembly andstow it in the spare tire area. Secure the assembly usingthe means provided. WARNING! A loose tire or jack thrown forward in a collision orhard stop could endanger the occupants of the ve...

WARNING! • Battery fluid is a corrosive acid solution; do notallow battery fluid to contact eyes, skin or cloth-ing. Don’t lean over the battery when attaching theclamps or allow the clamps to touch each other. Ifacid splashes in your eyes or on your skin, flushthe contaminated area immediately with...

CAUTION! DO NOT flat tow any vehicle equipped with anautomatic transmission. Damage to the drivetrainwill result. Manual Transaxle • Front Wheel Drive (FWD) or All Wheel Drive (AWD)vehicles can be flat towed (all four wheels on theground) with the transmission in NEUTRAL. • FWD vehicles can be towed...

Without The Ignition Key Special care must be taken when the vehicle is towedwith the ignition in the LOCK position. A dolly should beused under the front wheels if the rear wheels are raised.Proper towing equipment is necessary to prevent dam-age to the vehicle. Battery power is required to release...

MAINTAINING YOUR VEHICLE CONTENTS 䡵 Engine Compartment — 2.0L . . . . . . . . . . . . . 339 䡵 Engine Compartment — 2.4L . . . . . . . . . . . . . 340 䡵 Onboard Diagnostic System — OBD II . . . . . . 341 ▫ Loose Fuel Filler Cap Message . . . . . . . . . . . 341 䡵 Emissions Inspection And MaintenanceP...

ENGINE COMPARTMENT — 2.0L 1 — Washer Fluid Reservoir 6 — Integrated Power Module 2 — Power Steering Fluid Reservoir 7 — Battery (Under Cover) 3 — Engine Oil Fill 8 — Coolant Pressure Cap 4 — Air Cleaner Filter 9 — Engine Oil Dipstick 5 — Brake Fluid Reservoir 10 — Engine Coolant Reservoir MAINTAININ...

ENGINE COMPARTMENT — 2.4L 1 — Washer Fluid Reservoir 6 — Battery 2 — Power Steering Fluid Reservoir 7 — Air Cleaner Filter 3 — Engine Oil Fill 8 — Coolant Pressure Cap 4 — Brake Fluid Reservoir 9 — Engine Oil Dipstick 5 — Integrated Power Module 10 — Engine Coolant Reservoir 340 MAINTAINING YOUR VEH...

ONBOARD DIAGNOSTIC SYSTEM — OBD II Your vehicle is equipped with a sophisticated OnboardDiagnostic system called OBD II. This system monitorsthe performance of the emissions, engine, and automatictransaxle control systems. When these systems are oper-ating properly, your vehicle will provide excelle...

persists, the message will appear the next time thevehicle is started. This might indicate a damaged cap. Ifthe problem is detected twice in a row, the system willturn on the MIL. Resolving the problem will turn the MILlight off. EMISSIONS INSPECTION AND MAINTENANCEPROGRAMS In some localities, it ma...

5. Approximately 15 seconds later, one of two things willhappen: a. The MIL will flash for about 10 seconds and thenreturn to being fully illuminated until you turn OFFthe ignition or start the engine. This means that yourvehicle’s OBD II system is not ready and you shouldnot proceed to the I/M stat...

your vehicle. Refer to these manuals before attemptingany procedure yourself. NOTE: Intentional tampering with emissions control systems can result in civil penalties being assessedagainst you. WARNING! You can be badly injured working on or around amotor vehicle. Only do service work for which youh...

environment. Contact your authorized dealer, servicestation, or governmental agency for advice on how andwhere used oil and oil filters can be safely discarded inyour area. Engine Oil Filter The engine oil filter should be replaced at every engineoil change. Engine Oil Filter SelectionAll of this ma...

Maintenance-Free Battery The top of the maintenance-free battery is permanentlysealed. You will never have to add water, nor is periodicmaintenance required. WARNING! • Battery fluid is a corrosive acid solution and canburn or even blind you. Do not allow battery fluidto contact your eyes, skin, or ...

CAUTION! (Continued) • If a “fast charger” is used while the battery is inthe vehicle, disconnect both vehicle battery cablesbefore connecting the charger to the battery. Donot use a “fast charger” to provide starting voltage. Air Conditioner Maintenance For best possible performance, your air condi...

Refrigerant Recovery And RecyclingR-134a air conditioning refrigerant is a hydrofluoro-carbon (HFC) that is endorsed by the EnvironmentalProtection Agency and is an ozone-saving product. How-ever, the manufacturer recommends that air conditioningservice be performed by authorized dealers or otherser...

WARNING! A hot exhaust system can start a fire if you park overmaterials that can burn. Such materials might begrass or leaves coming into contact with your exhaustsystem. Do not park or operate your vehicle in areaswhere your exhaust system can contact anything thatcan burn. In unusual situations i...

When adding engine coolant (antifreeze), a minimumsolution of 50% recommended MOPAR 威 Antifreeze/ Coolant 5 Year/100,000 Mile Formula HOAT (HybridOrganic Additive Technology), or equivalent, in watershould be used. Use higher concentrations (not to exceed70%) if temperatures below ⫺ 34°F ( ⫺ 37°C) a...

long as the engine operating temperature is satisfactory,the coolant bottle need only be checked once a month. When additional engine coolant (antifreeze) is needed tomaintain the proper level, it should be added to thecoolant bottle. Do not overfill. Points to Remember NOTE: When the vehicle is sto...

• Keep the front of the radiator clean. If your vehicle isequipped with air conditioning, keep the front of thecondenser clean. • Do not change the thermostat for Summer or Winteroperation. If replacement is ever necessary, installONLY the correct type thermostat. Other designs mayresult in unsatisf...

when the pads are replaced. However, low fluid levelmay be caused by a leak and a checkup may be needed. NOTE: If your vehicle is equipped with a manual transaxle , the brake fluid reservoir supplies fluid to both the brake system and the clutch release system. The twosystems are separated in the re...

(CVTF+4). CVTF+4 is an engineered product and itsperformance may be impaired by supplemental additives. Manual Transaxle — If Equipped Lubricant SelectionUse only the manufacturers recommended transmissionfluid. Refer to “Fluids, Lubricants, and Genuine Parts” inthis section for the correct fluid ty...

The following maintenance recommendations will enableyou to obtain maximum benefit from the corrosionresistance built into your vehicle. What Causes Corrosion?Corrosion is the result of deterioration or removal ofpaint and protective coatings from your vehicle. The most common causes of corrosion ar...

CAUTION! Do not use abrasive or strong cleaning materials suchas steel wool or scouring powder, which will scratchmetal and painted surfaces. Special Care • If you drive on salted or dusty roads or if you drivenear the ocean, hose off the undercarriage at least oncea month. • It is important that th...

quarter window equipped with the radio antenna. Donot use scrapers or other sharp instruments which mayscratch the elements. When cleaning the rearview mirror,spray cleaner on the towel or rag that you are using. Donot spray cleaner directly on the mirror. Instrument Panel CoverThe instrument panel ...

Seat Belt MaintenanceDo not bleach, dye or clean the seat belts with chemicalsolvents or abrasive cleaners. This will weaken the fabric.Sun damage can also weaken the fabric. If the seat belts need cleaning, use a mild soap solution orlukewarm water. Do not remove the seat belts from thecar to wash ...

CAUTION! • When installing the IPM cover, it is important toensure the cover is properly positioned and fullylatched. Failure to do so may allow water to getinto the IPM, and possibly result in an electricalsystem failure. • When replacing a blown fuse, it is important touse only a fuse having the c...

Tail Lights, Rear Turn Signals and Backup Lights 1. Remove the two push-pins from the tail light housing. 2. Grasp the tail light and pull firmly to disengage thelight from the aperture panel. MAINTAINING YOUR VEHICLE 373 7

3. Twist and remove socket from light. 4. Remove the bulb from the socket and replace. 374 MAINTAINING YOUR VEHICLE

License Lights 1. Use a screw driver to gently pry against the side of thesnap tab to remove the lamp from the liftgate. 2. Rotate the socket 1/4 turn counterclockwise. MAINTAINING YOUR VEHICLE 375 7

3. Pull the bulb from the socket. Center High-Mounted Stoplight The light is an LED assembly. See your authorized dealerfor replacement. 376 MAINTAINING YOUR VEHICLE

FLUIDS AND CAPACITIES U.S. Metric Fuel (Approximate) 13.6 Gallons 51.5 Liters Engine Oil with Filter2.0L and 2.4L Engine (SAE 5W-20, API Certified) 4.5 Quarts 4.26 Liters Cooling System *2.0L and 2.4L Engine (MOPAR 威 Engine Coolant/Antifreeze 5 Year/100,000 Mile Formula) 7.2 Quarts 6.8 Liters * Incl...

MAINTENANCE SCHEDULES CONTENTS 䡵 Emissions Control System Maintenance . . . . . . 382 䡵 Maintenance Schedule . . . . . . . . . . . . . . . . . . 382 ▫ Required Maintenance Intervals . . . . . . . . . . 384 8 M A I N TE N A N C E SC H E DU LE S

EMISSIONS CONTROL SYSTEM MAINTENANCE The Scheduled Maintenance services listed in bold typemust be done at the times or mileages specified to ensurethe continued proper functioning of the emissions controlsystem. These and all other maintenance services in-cluded in this manual, should be done to pr...

oil if it has been six months since your last oil changeand even if the oil change indicator message is NOTilluminated. • Change your engine oil more often if you drive yourvehicle off-road for an extended period of time. • Under no circumstances should oil change intervalsexceed 6,000 miles (10 000...

Once a Month • Check the tire pressure and look for unusual wear ordamage. • Inspect the battery and clean and tighten the terminalsas required. • Check the fluid levels of coolant reservoir, brakemaster cylinder, power steering and transmission andadd as needed. • Check all lights and other electri...

IF YOU NEED CONSUMER ASSISTANCE CONTENTS 䡵 Suggestions For Obtaining Service For YourVehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 401 ▫ Prepare For The Appointment . . . . . . . . . . . 401 ▫ Prepare A List . . . . . . . . . . . . . . . . . . . . . . 401 ▫ Be Reasonable With R...

This is why you should always talk to an authorizeddealer’s service manager first. Most matters can be re-solved with this process. • If for some reason you are still not satisfied, talk to thegeneral manager or owner of the authorized dealer-ship. They want to know if you need assistance. • If an a...

Customer Assistance For The Hearing Or SpeechImpaired (TDD/TTY) To assist customers who have hearing difficulties, themanufacturer has installed special TDD (Telecommuni-cation Devices for the Deaf) equipment at its customercenter. Any hearing or speech impaired customer, whohas access to a TDD or a...

the ownership experience. You’ll be pleased with theirsincere efforts to resolve any warranty issues or relatedconcerns. WARNING! Engine exhaust, some of its constituents, and certainvehicle components contain, or emit, chemicalsknown to the State of California to cause cancer andbirth defects, or o...

To contact NHTSA, you may either call the Auto SafetyHotline toll free at 1–888–327–4236 (TTY: 1–800–424– 9153),or go to http://www.safercar.gov; or write to: Adminis-trator, NHTSA, 400 Seventh Street, SW., Washington, D.C.20590. You can also obtain other information about motorvehicle safety from h...

ABS (Anti-Lock Brake System) . . . . . . . . . . . . . . 266Adding Engine Coolant (Antifreeze) . . . . . . . . . . 355Adding Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . 305Adding Washer Fluid . . . . . . . . . . . . . . . . . . . . . 351Additives, Fuel . . . . . . . . . . . . . . . . ...

Shifting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 255Special Additives . . . . . . . . . . . . . . . . . . . . . . 361 Autostick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 257 Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 348 Keyless Transmitte...

Opener, Garage Door (HomeLink 威 ) . . . . . . . . . . . 138 Operator Manual (Owner’s Manual) . . . . . . . . . . . . 4Outside Air Intake . . . . . . . . . . . . . . . . . . . . . . . 243Overdrive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 257Overheating, Engine . . . . . . . . . . . ....

Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73Pretensioners . . . . . . . . . . . . . . . . . . . . . . . . . . 46Rear Seat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Seat Belts (Sedan) . . . . . . . . . . . . . . . . . . . . . . . . 36Seats . . . . . . . . ....

INTRODUCTION INTRODUCTION HOW TO USE THIS MANUAL WARNINGS AND CAUTIONS VEHICLE IDENTIFICATION NUMBER VEHICLE MODIFICATIONS/ALTERATIONS THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS Ignition Key RemovalLocking Doors With The KeyKey-In-Ignition ReminderSENTRY KEY Replacement KeysC...

2009 C ALIBER C AL IBER Chrysler LLC81-226-0939 Second Edition Printed in U.S.A. OWNER’S MANUAL 2009