Dodge 2007 Caliber - Manuals

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CONTENTS 䡵 A Word About Your Keys . . . . . . . . . . . . . . . . . 9 ▫ Ignition Key Removal . . . . . . . . . . . . . . . . . . . 9 ▫ Locking Doors With The Key . . . . . . . . . . . . . .10 ▫ Key-In-Ignition Reminder . . . . . . . . . . . . . . . .10 䡵 S...

A WORD ABOUT YOUR KEYS The dealer that sold you your new vehicle has the keycode numbers for your vehicle locks. These numbers canbe used to order duplicate keys from your dealer. Askyour dealer for these numbers and keep them in a safeplace. Ignition Key Removal Automatic Transaxle Place the shift ...

ignition cylinder to warn you that this safety feature isinoperable. The engine can be started and stopped butthe key cannot be removed until you obtain service. WARNING! Never leave children alone in a vehicle. Leavingchildren in a vehicle unattended is dangerous for anumber of reasons. A child or ...

SENTRY KEY — IF EQUIPPED The Sentry Key Immobilizer System prevents unautho-rized operation of the vehicle by disabling the engine.The system will shut the engine off after two (2) secondsof running if an invalid key is used to start the vehicle.This system utilizes ignition keys, which have an elec...

All of the keys provided with your new vehicle havebeen programmed to the vehicle electronics. Replacement Keys NOTE: Only keys that have been programmed to the vehicle electronics can be used to start the vehicle. Oncea Sentry Key has been programmed to a vehicle, it cannotbe programmed to any othe...

Repeat this procedure to program up to 8 keys. If you donot have a programmed sentry key, contact your dealerfor details. General Information The Sentry Key system complies with FCC rules part 15and with RSS-210 of Industry Canada. Operation issubject to the following conditions: • This device may n...

Automatic Transaxle Ignition Interlock System This system prevents the key from being removed unlessthe shift lever is in PARK. It also prevents shifting out ofPARK unless the key is in the ACC, or ON positions, andthe brake pedal is depressed. DOOR LOCKS Manual Door Locks Use the manual door lock p...

WARNING! When leaving the vehicle always remove the keyfrom the ignition lock, and lock your vehicle. Do notleave children unattended in the vehicle, or withaccess to an unlocked vehicle. Unsupervised use ofvehicle equipment may cause severe personal inju-ries and death. CAUTION! An unlocked vehicle...

Automatic Door Locks—If Equipped The doors will lock automatically on vehicles with powerdoor locks if all of the following conditions are met: 1. The Auto Lock feature is enabled. 2. The transmission is in gear. 3. All doors are closed. 4. The throttle is pressed. 5. The vehicle speed is above 15 m...

3. Depress the power door lock switch to lock the doors. 4. Verify reprogramming by driving the vehicle. Auto Unlock The doors will unlock automatically on vehicles withpower door locks if: 1. The Auto Unlock feature is enabled. 2. The transmission was in gear and the vehicle speedreturned to 0 mph ...

WARNING! Avoid trapping anyone in a vehicle in a collision.Remember that the rear doors can only be openedfrom the outside when the child protection locks areengaged. NOTE: For emergency exit with the system engaged, move the lock plunger up (unlocked position), roll downwindow and open the door wit...

To unlock the doors and liftgate: Press and release the UNLOCK button on the key fobonce to unlock only the driver’s door or twice to unlockall the doors and liftgate. When the UNLOCK button ispressed, the illuminated entry will initiate, and theparking lights will flash on twice. The time for thisf...

3. Test the flash lamps with LOCK feature while outsideof the vehicle, by pressing the LOCK button on the keyfob with the ignition in the LOCK position, and the keyremoved. NOTE: Pressing the LOCK button on the key fob, while you are in the vehicle, will activate the Security Alarm.Opening a door wi...

1. If the key fob is equipped with a screw, remove thescrew. With the transmitter buttons facing down, use aflat blade to pry the two halves of the transmitter apart.Make sure not to damage the elastomer seal duringremoval. 2. Remove and replace the batteries. Avoid touching thenew batteries with yo...

To set the alarm: 1. Remove the keys from the ignition switch and get outof the vehicle. 2. Lock the door using either the door key, power doorlock switch, or the Keyless Entry Transmitter and close alldoors. 3. The indicator light in the instrument cluster will flashrapidly for 16 seconds. This sho...

LIFTGATE NOTE: The key that is used to start the vehicle is also used to lock or unlock the doors and open the liftgate. To unlock the liftgate, insert the key into the lock andturn to the right (manual lock models only). The liftgatecan also be unlocked using the remote keyless entry or byactivatin...

WARNING! • Driving with the liftgate open can allow poison-ous exhaust gases into your vehicle. You and yourpassengers could be injured by these fumes. Keepthe liftgate closed when you are operating thevehicle. • If you are required to drive with the liftgate open,make sure that all windows are clos...

Auto Down The driver’s window switch has an Auto Down feature.Push the window switch past the first detent, release, andthe window will go down automatically. To cancel theAuto Down movement, operate the switch in either theup or down direction and release the switch. Window Lockout Switch The windo...

If your vehicle is equipped with the Occupant Classifi-cation System (OCS) there will be a Passenger AirbagDisabled (PAD) Indicator Light located on the center ofthe instrument panel. Please pay close attention to the information in thissection. It tells you how to use your restraint systemproperly ...

Lap/Shoulder Belt Operating Instructions 1. Enter the vehicle and close the door. Sit back andadjust the seat. 2. The seat belt latch plate is above the back of the frontseat, next to your arm. Grasp the latch plate and pull outthe belt. Slide the latch plate up the webbing as far asnecessary to all...

WARNING! • A belt that is buckled into the wrong buckle will not protect you properly. The lap portion could ridetoo high on your body, possibly causing internalinjuries. Always buckle your belt into the bucklenearest you. • A belt that is too loose will not protect you as well. In a sudden stop you...

10. To disengage the mini latch from the mini buckle forstorage, insert the regular latch plate into the blackbutton on the top of the mini buckle. The belt willautomatically retract to its stowed position. If necessary,slide the latch plate down the webbing to allow the beltto retract fully. Insert...

Seat Belts And Pregnant Women We recommend that pregnant women use the seat beltsthroughout their pregnancy. Keeping the mother safe isthe best way to keep the baby safe. Pregnant women should wear the lap part of the beltacross the thighs and as snug across the hips as possible.Keep the belt low so...

The front airbags have a multistage inflator design. Thismay allow the airbag to have different rates of inflationthat are based on collision severity and occupant size.Also, the front passenger airbag is certified to the Federalregulations that define Occupant Classification (Refer to ⬙ Occupant Cl...

• Driver Airbag • Passenger Airbag • Front Seat Mounted Side Airbags (If equipped) • Side Curtain Airbags • Steering Wheel and Column • Instrument Panel • Interconnecting Wiring • Knee Impact Bolsters • Driver Inflatable Knee Blocker • Front Acceleration Sensors • Driver and Front Passenger Seat Bel...

when the front passenger airbag is turned off. ThePAD Indicator lamp illuminates the words ⬙ PASS AIR BAG OFF ⬙ to show that the front passenger airbag will not inflate during a collision requiring airbags. Whenthe right front passenger seat is empty or when verylight objects are placed on the seat,...

The ORC Module monitors the readiness of the elec-tronic parts of the system whenever the ignition switchis in the START or ON positions. These include all ofthe items previously mentioned. In moderate to severe side collisions, the side airbaginflator on the crash side of the vehicle is triggered,r...

• Do not modify the front seat center console or centerposition seat in any way. • Do not use prior or future model year seat covers notdesignated for the specific model being repaired. Al-ways use the correct seat cover specified for thevehicle. • Do not replace the seat cover with an aftermarket s...

If you do have a collision which deploys the airbags, anyor all of the following may occur: • The nylon airbag material may sometimes cause abra-sions and/or skin reddening to the driver and frontpassenger as the airbags deploy and unfold. Theabrasions are similar to friction rope burns or thoseyou ...

• Turns on the interior lamps which remain on as long asthe battery has power or until the ignition key isremoved. • Unlocks the doors automatically Maintaining Your Airbag System WARNING! • Modifications to any part of the airbag system could cause it to failwhen you need it. You could be injured i...

Airbag Light You will want to have the airbags ready to inflate for yourprotection in a collision. While the airbag system isdesigned to be maintenance free, if any of the followingoccurs, have an authorized dealer service the systemimmediately. • The AIRBAG light does not come on during the 6 to 8s...

infant carriers do, so they can be used rearward-facingby children who weigh more than 20 lbs. (9 kg) but areless than one year old. • Rearward-facing child seats must NEVER be used in the front seat of a vehicle with a front passengerairbag. An airbag deployment could cause severeinjury or death to...

• Buckle the child into the seat according to the childrestraint manufacturer’s directions. • When your child restraint is not in use, secure it in thevehicle with the seat belt or remove it from the vehicle.Don’t leave it loose in the vehicle. In a sudden stop orcollision, it could strike the occup...

restraints in adjacent rear seating positions, you can usethe LATCH anchors or the vehicle’s seat belt for theoutboard position, but you must use the vehicle’s seatbelt at the center position. If your child restraints are notLATCH-compatible, you can only install the child re-straints using the vehi...

reach. If the buckled seat belt interferes with the childrestraint installation, instead of tucking the seat beltbehind the child restraint, route the seat belt through thechild restraint belt path and then buckle it. This shouldstow the seat belt out of the reach of an inquisitive child.Remind all ...

WARNING! An incorrectly anchored tether strap could lead toincreased head motion and possible injury to thechild. Use only the anchor position directly behindthe child seat to secure a child restraint top tetherstrap. Children Too Large For Booster Seats Children who are large enough to wear the sho...

UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS 䡵 Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69 ▫ Inside Day/Night Mirror — If Equipped . . . . . .69 ▫ Outside Mirror—Driver’s Side . . . . . . . . . . . . .69 ▫ Outside Mirror—Passenger’s Side . . . . . . . . . . .69 ▫ Ele...

MIRRORS Inside Day/Night Mirror — If Equipped Adjust the mirror to center on the view through the rearwindow. A two point pivot system allows for horizontaland vertical mirror adjustment. Annoying headlight glare can be reduced by moving thesmall control under the mirror to the night position(toward...

Electric Remote-Control Mirrors The controls for the power mirrors are located on thedriver’s door trim panel. To adjust a mirror, turn the control wand toward the leftor right mirror positions indicated. Tilt the control wandin the direction you want the mirror to move. Whenfinished adjusting the m...

WARNING! Vehicles and other objects seen in the passenger sideconvex mirror will look smaller and farther awaythan they really are. Relying too much on yourpassenger side mirror could cause you to collidewith another vehicle or other object. Use your insidemirror when judging the size or distance of...

The UConnect™ system can be used with any Hands-Free Profile certified Bluetooth™ cellular phone. Seewww.chrysler.com/uconnect for supported phones. Ifyour cellular phone supports a different profile (e.g.,Headset Profile), you may not be able to use any UCon-nect™ features. Refer to your cellular s...

• www.jeep.com/uconnect The following are general phone to UConnect™ Systempairing instructions: • Press the ’Phone’ button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Setup Phone Pairing ⬙ and follow the audible prompts. • When prompted, after the voice on beep, say ⬙ Pair ...

• Performance is maximized under: • low-to-medium blower setting, • low-to-medium vehicle speed, • low road noise, • smooth road surface, • fully closed windows, • dry weather condition. • In a convertible vehicle, the system performance maybe compromised with roof top down. • Even though the system...

• Operation from driver seat. • In a convertible vehicle, the system performance maybe compromised with roof top down. • Performance, such as audio clarity, echo, and loudnessto a large degree rely on the phone and network, andnot the UConnect™ system. • Echo at far end can sometime be reduced by lo...

SEATS Front Seat Adjustment The adjusting bar is at the front of the seats, near thefloor. Pull the bar up to move the seat to the desiredposition. Using body pressure, move forward and rearward on theseat to be sure the seat adjusters have latched. WARNING! • Adjusting a seat while the vehicle is m...

Manual Seat Height Adjustment — If Equipped The driver’s seat height can be raised or lowered by usingthe ratcheting handle on the outboard side of the seat toadjust the driving position. Manual Lumbar— If Equipped The Lumbar adjustment is located on the outboard sideof the driver’s seat. To increas...

Driver’s Seat Back Recline To recline: 1. Lean forward before lifting the handle, then lean backto the desired position and release the handle. 2. Lift the handle to return the seatback to an uprightposition. Adjustable Head Restraints Head restraints can reduce the risk of whiplash injury inthe eve...

Heated Seats — If Equipped WARNING! Persons who are unable to feel pain to the skinbecause of advanced age, chronic illness, diabetes,spinal cord injury, medication, alcohol use, exhaus-tion or other physical condition must exercise carewhen using the seat heater. It may cause burns evenat low tempe...

When high-temperature heating is selected, the heatersprovide a boosted heat level during the first four minutesof operation after heating is activated. The heat outputthen drops to the normal high-temperature level. Ifhigh-level heating is selected, the system will automati-cally switch to the low ...

Folding Rear Seat To provide additional storage area, each rear seatback canbe folded forward. Pull the strap forward to move theseat forward and flat. Front Passenger Seat Folded Flat Folding Rear Seat UNDERSTANDING THE FEATURES OF YOUR VEHICLE 99 3

Reclining Rear Seat — If Equipped For additional comfort, pull the strap forward justenough to release the seatback latch. Then push theseatback to a reclined position, approximately 35 degreesmaximum, and release the strap. Rear Seat Folded Flat Reclining The Rear Seat 100 UNDERSTANDING THE FEATURE...

WARNING! • It is extremely dangerous to ride in a cargo area,inside or outside of a vehicle. In a collision,people riding in these areas are more likely to beseriously injured or killed. • Do not allow people to ride in any area of yourvehicle that is not equipped with seats and seatbelts • Be sure ...

Then move the safety catch located under the front edgeof the hood, near the center and raise the hood. Lift the hood prop rod, clipped to the left side (right sidefacing hood) of the engine compartment, to secure thehood in the open position. Place the hood prop at thelocation stamped into the inne...

NOTE: The lights will remain on until the switch is pressed a second time, so be sure they have been turnedoff before leaving the vehicle. They will not turn offautomatically. Multi-Function Control Lever The Multi-Function Control Lever controls the operationof the headlights, parking lights, turn ...

To change the brightness of the instrument panel lights,rotate the center portion of the Multi-Function ControlLever up or down. Lights-on Reminder If the headlights or parking lights are on after the ignitionis turned OFF, a chime will sound to alert the driverwhen the driver’s door is opened. Fog ...

Turn Signals Move the Multi-Function Control Lever up or down andthe arrows on each side of the instrument cluster flash toshow proper operation of the front and rear turn signallights. You can signal a lane change by moving the leverpartially up or down without moving beyond the detent. If either l...

Passing Light You can signal another vehicle with your headlights bylightly pulling the Multi-Function Control Lever towardyou. This will cause the headlights to turn on at highbeam and remain on until the lever is released. NOTE: If the Multi-Function Control Lever is held in the flash to pass posi...

Mist Feature Push down on the wiper control lever to activate a singlewipe to clear the windshield of road mist or spray froma passing vehicle. As long as the lever is held down, thewipers will continue to operate. CAUTION! In cold weather, always turn off the wiper switchand allow the wipers to ret...

Windshield Wiper Operation Turn the end of the handle to select the desired wiperspeed. Intermittent Wiper System Use the intermittent wiper when weather conditionsmake a single wiping cycle, with a variable pause be-tween cycles, desirable. Select the delay interval byturning the end of the lever. ...

WARNING! Tilting the steering column while the vehicle ismoving is dangerous. Without a stable steering col-umn, you could lose control of the vehicle and havean accident. Adjust the column only while the ve-hicle is stopped. Be sure it is locked before driving. ELECTRONIC SPEED CONTROL — IF EQUIPPE...

To Activate: Push the ON/OFF button. The CRUISE indicator in theinstrument cluster will illuminate. To turn the systemOFF, push the ON/OFF button a second time. TheCRUISE indicator will turn off. The system should beturned OFF when not in use. WARNING! Leaving the Electronic Speed Control system onw...

To decrease speed while speed control is ON, push downand hold “SET DECEL”. Release the lever when thedesired speed is reached, and the new speed will be set. Tapping the “SET DECEL” button once will result in a 1mph (2 km/h) speed decrease. Each time the button istapped, speed decreases. Manual Tra...

GARAGE DOOR OPENER — IF EQUIPPED NOTE: The HomeLink 威 system will be disabled if the Vehicle Theft Alarm (if equipped) is in the Armed orAlarming state. The HomeLink 威 system will only operate when the Vehicle Theft Alarm (if equipped) is in theDisarmed mode. The HomeLink 威 Universal Transceiver rep...

WARNING! A moving garage door can cause injury to people andpets in the path of the door. People or pets could beseriously or fatally injured. Only use this transceiverwith a garage door opener that has a “stop andreverse” feature as required by federal safety stan-dards. This includes most garage d...

3. Choose one of the three Universal Transceiver buttonsto program. Place the hand held controller one to threeinches from the Universal Transceiver while keeping itsindicator light in view. 4. Using both hands, press the hand held transmitterbutton and the desired Universal Transceiver button. Dono...

On garage door openers with the “Rolling Code” feature,the transmitter code changes after each use to prevent thecopying of your code. To check if your device is protected by a “Rolling Code”system: • Check the owner’s manual for the device for mentionof “Rolling Codes”. • Press and hold the program...

Canadian Programming/Gate Programming Canadian frequency laws, and the technology of someentry gates, require you to press and release the handheld transmitter button every two seconds during pro-gramming. Continue to press and hold the Universal Transceiverbutton while you press and release the han...

ELECTRONIC BRAKE CONTROL SYSTEM -ABS/TCS/BAS/ESP — IF EQUIPPED If your vehicle is equipped with the advanced electronicbrake control system that includes Anti-Lock Brake Sys-tem (ABS), Traction Control System (TCS) Brake AssistSystem (BAS), and Electronic Stability Program (ESP). Allfour systems wor...

WARNING! • Electronic Stability Program (ESP) cannot preventthe natural laws of physics from acting on thevehicle, nor can it increase the traction affordedby prevailing road conditions. • ESP cannot prevent accidents, including thoseresulting from excessive speed in turns, drivingon very slippery s...

WARNING! In the Partial ESP mode, the engine torque reductionand stability features are desensitized. Therefore,the enhanced vehicle stability offered by ESP isunavailable. NOTE: To improve the vehicle’s traction when driving with snow chains, or starting off in deep snow, sand orgravel, it may be d...

POWER SUNROOF — IF EQUIPPED The power sunroof switch is located in the reading lamp. WARNING! • Never leave children in a vehicle, with the keys inthe ignition switch. Occupants, particularly unat-tended children, can become entrapped by thepower sunroof while operating the power sunroofswitch. Such...

OPENING SUNROOF – MANUAL To open the sunroof, press and hold the switch rearwardto full open. Any release of the switch will stop themovement and the sunroof will remain in a partial opencondition until the switch is pushed and held rearwardagain. OPENING SUNROOF – EXPRESS MODE By pressing the switc...

WARNING! To Avoid Serious Injury or Death: • Do not use a 3 - Prong Adaptor. • Do not insert any objects into the receptacles. • Do not touch with wet hands. • Close the lid when not in use, and while drivingthe vehicle • If this outlet is mishandled it may cause anelectric shock and failure. Power ...

CONSOLE FEATURES WARNING! Do not operate this vehicle with the console com-partment lid in the open position. Cell phones,music players, and other hand held electronic de-vices should be stowed while driving. Use of thesedevices while driving can cause an accident due todistraction, resulting in dea...

CARGO AREA FEATURES Cargo Light/Removable Self- RechargingFlashlight – If Equipped The dual-function light is mounted in the headlinerabove the cargo area to illuminate the cargo area, andpart of it snaps out of the bezel to serve as a flashlightwhen needed. The flashlight features two bright LEDlig...

Tonneau cover — If Equipped The cargo area trim panels include two notches formounting the available tonneau cover that accommo-dates the reclining rear seat. WARNING! In an accident a cargo cover loose in the vehiclecould cause injury. It could fly around in a suddenstop and strike someone in the v...

Fold Down Speakers – If Equipped When the liftgate is open, the speakers can swing downof the trim panel to face rearward, for tailgating andother activities. REAR WINDOW FEATURES Rear Window Wiper/Washer A switch on the right side of the steering column controlsoperation of the rear wiper/washer fu...

If the rear wiper is operating when the ignition is turnedOFF, the wiper will automatically return to the “Park”position if power accessory delay is active. Power acces-sory delay can be cancelled by opening the door, if thishappens the rear wiper will stop at its current positionand will not go to ...

Rear Window Defroster CAUTION! Use care when washing the inside of the rear win-dow to prevent damage to heating elements. Use asoft cloth and a mild washing solution, wipingparallel to the heating elements. Also, keep allobjects a safe distance from the window to preventdamaging the heating element...

Vehicles without air conditioning can use that space forstorage. The lower bin holds the owner ’s manual andother important documents. Another storage bin is lo-cated on the outboard side of the steering wheel can holdsmall items like parking cards for easy access. Slide Control Movement 136 UNDERST...

UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS 䡵 Instrument Panel Features . . . . . . . . . . . . . . . 141 䡵 Instrument Cluster—Base . . . . . . . . . . . . . . . . 142 䡵 Instrument Cluster—Premium . . . . . . . . . . . . 143 䡵 Instrument Cluster Descriptions . . . . . . . . . . . 144 䡵 Electronic V...

INSTRUMENT PANEL FEATURES UNDERSTANDING YOUR INSTRUMENT PANEL 141 4

INSTRUMENT CLUSTER—BASE 142 UNDERSTANDING YOUR INSTRUMENT PANEL

INSTRUMENT CLUSTER—PREMIUM UNDERSTANDING YOUR INSTRUMENT PANEL 143 4

INSTRUMENT CLUSTER DESCRIPTIONS 1. Fuel Gauge When the ignition switch is in the ON position,the pointer will show the level of fuel remainingin the fuel tank. 2. Fuel Door Reminder This is a reminder that the Fuel Filler Door islocated on the left side of the vehicle. 3. Temperature Gauge The tempe...

off for 60 seconds when a system fault is detected. Theflash cycle will repeat every ten minutes or until the faultcondition is removed and reset. If this indicator comes on, the entire PRNDL/odometerdisplay will brighten to FULL DAYTIME INTENSITYand will not be dimmable. CAUTION! The TPMS has been ...

29. Electronic Vehicle Information CenterDisplay—If Equipped When the appropriate conditions exist, this displayshows the Electronic Vehicle Information Center (EVIC)messages. 30. Transmission Over Temp Light During sustained high speed driving on hotdays, the automatic transaxle oil may be-come too...

• Headlamps On • Key In Ignition • Check TPM System EVIC Functions Press the EVIC button until one of the following func-tions are displayed on the EVIC: • Compass/Temperature/Audio • Average Fuel Economy • Distance To Empty (DTE) • Elapsed Time • Tire Pressure Monitor (TPM) • Personal Settings To R...

Average Fuel Economy Shows the average fuel economy since the last reset.When the fuel economy is reset, the display will read“RESET” or show dashes for two seconds. Then, thehistory information will be erased, and the averaging willcontinue from the last fuel reading before the reset. Distance To E...

Flash Lights with Remote Key Lock When ON is selected, the front and rear turn signals willflash when the doors are locked or unlocked using theremote keyless entry transmitter. This feature may beselected with or without the sound horn on lock featureselected. Press and hold the EVIC button when in...

Confirmation of Voice Commands — If Equipped When ON is selected all voice commands from theU-Connect system are confirmed. Press and hold theEVIC button when in this display until “ON” or “OFF”appears to make your selection. Display English or Metric The EVIC, odometer, and navigation system units ...

Compass Calibration The Compass will automatically calibrate if the Calindicator is flashing, by driving around slowly (under 5mph / 8 km/h) in one or more complete circles in an areafree from large metallic objects or power lines, until theCal indicator turns off. If during normal use the compassap...

Two Types of Signals There are two basic types of radio signals... AM orAmplitude Modulation, in which the transmitted soundcauses the amplitude, or height, of the radio waves tovary... and FM or Frequency Modulation, in which thefrequency of the wave is varied to carry the sound. Electrical Disturb...

Clock Setting Procedure 1. Press and hold the time button until the hours blink. 2. Adjust the hours by turning the right side Tune /Audio control. 3. After the hours are adjusted, press the right side Tune/ Audio control to set the minutes. 4. Adjust the minutes using the right side Tune / Audiocon...

Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/Volume Control (Rotary) Press the ON/VOL control to turn the radio ON. Pressthe ON/VOL a second time to turn OFF the radio. Electronic Volume Control The electronic volu...

Operation Instructions - CD Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Inserting The Compact Disc (Single CD Player) Gently insert one CD into the CD player with the CDlabel facing up. The CD will automatically be pulled intothe CD Player and the CD icon w...

TIME Button (CD Mode) Press this button to change the display from elapsed CDplaying time to time of day. The time of day will displayfor 5 seconds. RW/FF (CD Mode) Press and hold the FF (Fast Forward) and the CD playerwill begin to fast forward until FF is released. The RW(Reverse) button works in ...

SALES CODE RAQ – AM/FM/CD (6-DISC) RADIOWITH OPTIONAL SATELLITE RADIO, HANDSFREE PHONE, AND VEHICLE ENTERTAINMENTSYSTEMS (VES) CAPABILITIES NOTE: The radio sales code is located on the lower right side of your radio faceplate. Operating Instructions - Radio Mode NOTE: The ignition switch must be in ...

SEEK Button (Radio Mode) Press and release the SEEK button to search for the nextlistenable station in either AM/FM or Satellite (ifequipped) mode. Press the right side of the button to seekup and the left side to seek down. The radio will remaintuned to the new station until you make another selec-...

5. To exit, press any button/knob or wait 5 seconds. RW/FF (Radio Mode) Pressing the rewind/fast forward button causes the tunerto search for the next frequency in the direction of thearrows. This feature operates in either AM, FM or Satel-lite (if equipped) frequencies. TUNE Control (Radio Mode) Tu...

Press the SEEK button to move to the next randomlyselected track. Press and hold the FF button to fast forward through thetracks. Release the FF button to stop the fast forwardfeature. Press the RND button a second time to stop RandomPlay. Buttons 1 - 6 (CD MODE for CD Audio Play) Selects disc posit...

writing ⬙ are most likely multisession discs. The use of multisession for CD audio or MP3 playback may result inlonger disc loading times. Supported MP3 File Formats The radio will recognize only files with the *.mp3 exten-sion as MP3 files. Non-MP3 files named with the *.mp3extension may cause play...

the radio will play the next CD after a 2 minute timeout.If the CD is removed and there are no other CD’s in theradio, the radio will remain in CD mode and display ⬙ INSERT DISC” for 2 minutes. After 2 minutes the radio will go to the previous tuner mode. MSG or INFO Button (CD Mode for MP3 Play) Pr...

Operating Instructions - Video EntertainmentSystem (VES 威 ) (If Equipped) Refer to separate Video Entertainment System (VES 威 ) Guide. SALES CODE RAK – AM/FM/CASSETTE/CD(6-DISC) RADIO WITH OPTIONAL SATELLITERADIO, HANDS FREE PHONE, VIDEO, MP3, andWMA CAPABILITIES NOTE: The radio sales code is locate...

NOTE: If you have selected a PTY with the tune knob, simply pressing the tune button in will go directly to a“PTY seek”. Buttons 1 - 6 (Radio Mode) These buttons tune the Radio to the stations that youcommit to push-button memory {12 AM, 12 FM, and 12Satellite (if equipped) stations}. Operating Inst...

Supported MP3 File Formats The radio will recognize only files with the *.mp3 exten-sion as MP3 files. Non-MP3 files named with the *.mp3extension may cause playback problems. The radio isdesigned to recognize the file as an invalid MP3 and willnot play the file. When using the MP3 encoder to compre...

To increase the speed of disc loading, it is recommendedto use CD-R media and single-session discs. To create asingle-session disc, enable the Disc at Once option beforewriting to the disc. Operation Instructions - (CD Mode for MP3 andWMA Audio Play) SEEK Button (CD Mode for MP3 and WMA Play) Pressi...

Operating Instructions - Video EntertainmentSystem (VES) (If Equipped) Refer to separate “Video Entertainment System (VES)Guide.” SALES CODE REC — AM/FM/CD (6–DISC) RADIOWITH NAVIGATION SYSTEM Satellite Navigation Radio with CD Player with MP3Capability (REC) - combines a Global-PositioningSystem-ba...

• Driving under wide bridges or along tall buildings cancause intermittent reception. • Placing objects over or too close to the antenna cancause signal blockage. REMOTE SOUND SYSTEM CONTROLS — IFEQUIPPED The remote sound system controls are located on the rearsurface of the steering wheel. Reach be...

CD Player Pressing the top of the switch once will go to the nexttrack on the CD. Pressing the bottom of the switch oncewill go to the beginning of the current track or to thebeginning of the previous track if it is within one secondafter the current track begins to play. If you press the switch up ...

RADIO OPERATION AND CELLULAR PHONES Under certain conditions, the cellular phone being ON inyour vehicle can cause erratic or noisy performance fromyour radio. This condition may be lessened or eliminatedby relocating the cellular phone antenna. This conditionis not harmful to the radio. If your rad...

The controls are as follows: Fan Control Use this control to regulatethe amount of air forcedthrough the system in anymode you select. The fanspeed increases as you movethe control to the right fromthe OFF position. Mode Control (Air Direction) The mode control allows youto choose from several pat-t...

heat at the windshield. This setting is good for main-taining comfort while reducing moisture on the wind-shield. Defrost Air is directed through the windshield and sidewindow demist outlets. Use this mode with maximum fan and temperature settings for best wind-shield and side window defrosting. NOT...

Air Conditioning Use this button to engage theAir Conditioning. A lamp willilluminate when the Air Con-ditioning System is engaged. NOTE: The air conditioning compressor will not en- gage until the engine has been running for about 10seconds. MAX A/C For maximum cooling use theA/C and recirculate bu...

Circulation Control Use this button to choose be-tween outside air intake orrecirculation of the air insidethe vehicle. A lamp will illu-minate when you are in recir-culate mode. Only use the re-circulate mode to temporarilyblock out any outside odors,smoke, or dust and to cool theinterior rapidly u...

Operating Tips UNDERSTANDING YOUR INSTRUMENT PANEL 203 4

Window Fogging Vehicle side windows tend to fog on the inside in mildrainy or humid weather. To clear the windows, set modeto the mix or defrost position. Direct the panel outletstoward the side windows. Do not use recirculate withoutA/C for long periods as fogging may occur. Interior fogging on the...

STARTING AND OPERATING CONTENTS 䡵 Starting Procedures . . . . . . . . . . . . . . . . . . . . 208 ▫ Automatic Transaxle . . . . . . . . . . . . . . . . . . . 208 ▫ Manual Transaxle . . . . . . . . . . . . . . . . . . . . . 208 ▫ Normal Starting . . . . . . . . . . . . . . . . . . . . . . 208 ▫ Extre...

STARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust bothinside and outside mirrors, and fasten your seat belts. WARNING! Never leave children alone in a vehicle. Leavingchildren in a vehicle unattended is dangerous for anumber of reasons. A child or others could beseriously or...

CAUTION! To prevent damage to the starter, do not crank theengine for more than 15 seconds at a time. Wait 10 to15 seconds before trying again. After Starting The idle speed will automatically decrease as the enginewarms up. AUTOMATIC TRANSAXLE — IF EQUIPPED NOTE: The Continuously Variable Automatic...

CAUTION! Damage to the transaxle may occur if the followingprecautions are not observed: • Shift into PARK only after the vehicle has come to acomplete stop. • Shift into or out of REVERSE only after the vehicle hascome to a complete stop and the engine is at idlespeed. • Do not shift from REVERSE, ...

allows you to insert your finger to override the system. Ifthis occurs obtain service as soon as possible. Automatic Transaxle Ignition Interlock System This system prevents the key from being removed unlessthe shift lever is in PARK. It also prevents shifting out ofPARK unless the key is in the ACC...

• When shifting into P (Park), firmly move the lever allthe way forward until it stops. • Look at the shift indicator window on the console toensure it is in the P (Park) position. • You must depress the brake pedal to move the shiftlever out of the P (Park) position. CAUTION! Before moving the shif...

NOTE: After pushing beyond the detent (bump/step) and entering “maximum performance” mode, the CVTwill no longer operate in the economy mode, but willincrease the engine speed up to 6000 RPM. The enginespeed will remain at this high RPM while the vehicleaccelerates. AUTOSTICK — IF EQUIPPED Autostick...

ratio. After Autostick is activated, the manual ratioselected is displayed in the transmission ratio displayand tipping the lever to the (+) or (-) direction will causean upshift or downshift by one ratio. Autostick is deactivated: • By holding the lever to (+) momentarily. • When the shift lever is...

Fully depress the clutch pedal before you shift gears. Asyou release the clutch pedal, lightly depress the accelera-tor pedal. Use each gear in numerical order - do not skip a gear. Besure the transaxle is in FIRST gear, (not THIRD), whenstarting from a standing position. Damage to the clutchcan res...

PARKING BRAKE When the parking brake is applied with theignition on, the Brake Light in the instrumentcluster will come on. NOTE: This light only shows that the parking brake is on. It does not show the degree of brake application. If the parking brake is applied while the vehicle ismoving, a chime ...

WARNING! • Never leave children alone in a vehicle. Leavingchildren in a vehicle unattended is dangerous fora number of reasons. A child or others could beseriously or fatally injured. Don’t leave the keysin the ignition. A child could operate powerwindows, other controls, or move the vehicle. • Be ...

POWER STEERING The standard power steering system will give you goodvehicle response and increased ease of maneuverabilityin tight spaces. The system will provide mechanicalsteering capability if power assist is lost. If for some reason the power assist is interrupted, it willstill be possible to st...

DRIVING ON SLIPPERY SURFACES Acceleration Rapid acceleration on snow covered, wet, or other slip-pery surfaces may cause the front wheels to pull errati-cally to the right or left. This phenomenon occurs whenthere is a difference in the surface traction under the front(driving) wheels. WARNING! Rapi...

TIRE SAFETY INFORMATION Tire Markings NOTE: • P (Passenger)-Metric tire sizing is based on U.S. designstandards. P-Metric tires have the letter “P” moldedinto the sidewall preceding the size designation. Ex-ample: P215/65R15 95H. • European Metric tire sizing is based on Europeandesign standards. Ti...

Tire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standards ⴖ ....blank.... ⴖ = Passenger car tire based on European design standards LT = Light Truck tire based on U.S. design standards T = Temporary Spare tire 31 = Overall Diameter in Inches (in) 215 = S...

EXAMPLE: Service Description: 95 = Load Index —A numerical code associated with the maximum load a tire can carry. H = Speed Symbol —A symbol indicating the range of speeds at which a tire can carry a load correspondingto its load index under certain operating conditions.—The maximum speed correspon...

Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire;however, the date code may only be on one side. Tireswith white sidewalls will have the full TIN includingdate code located on the white sidewall side of the tire. Look for the TIN on the outboard side of black si...

Tire Loading and Tire Pressure Tire Placard Location NOTE: The proper cold tire inflation pressure is listed on either the face of the driver’s door or the driver’s side“B” pillar. Tire and Loading Information Placard This placard tells you important information aboutthe:1) number of people that can...

Loading The vehicle maximum load on the tire must not exceedthe load carrying capacity of the tire on your vehicle. Youwill not exceed the tire’s load carrying capacity if youadhere to the loading conditions, tire size, and cold tireinflation pressures specified on the “Tire and LoadingInformation” ...

2. Economy— Improper inflation pressures can cause uneven wearpatterns to develop across the tire tread. These abnormalwear patterns will reduce tread life resulting in a need forearlier tire replacement. Under inflation, also increasestire rolling resistance and results in higher fuel consump-tion....

CAUTION! After inspecting or adjusting the tire pressure, al-ways reinstall the valve stem cap (if equipped). Thiswill prevent moisture and dirt from entering thevalve stem, which could damage the valve stem. Inflation pressures specified on the placard are always“cold tire inflation pressure.” Cold...

WARNING! High speed driving with your vehicle under maxi-mum load is dangerous. The added strain on yourtires could cause them to fail. You could have aserious accident. Don’t drive a vehicle loaded to themaximum capacity at continuous speeds above 75mph (120 km/h). Radial-Ply Tires WARNING! Combini...

WARNING! Fast spinning tires can be dangerous. Forces gener-ated by excessive wheel speeds may cause tire dam-age or failure. A tire could explode and injuresomeone. Do not spin your vehicle’s wheels fasterthan 30 mph (48 km/h) for more than 30 secondscontinuously when you are stuck, and don’t letan...

Life of Tire The service life of a tire is dependent upon varyingfactors including but not limited to: • Driving style • Tire pressure • Distance driven WARNING! Tires and spare tire should be replaced after sixyears, regardless of the remaining tread. Failure tofollow this warning can result in sud...

WARNING! • Do not use a tire, wheel size or rating other thanthat specified for your vehicle. Some combina-tions of unapproved tires and wheels may changesuspension dimensions and performance charac-teristics, resulting in changes to steering, han-dling, and braking of your vehicle. This can causeun...

sufficiently low enough to turn ON the “Tire PressureMonitoring Light”. Driving the vehicle may cause the tirepressure to rise to approximately 30 psi (207 kPa), but the“Tire Pressure Monitoring Light” will still be ON. In thissituation, the “Tire Pressure Monitoring Light” will turnOFF only after t...

Display Settings • Your system can be set to display pressure units in PSI,kPa, or BAR. NOTE: These display settings may not be available due to Regulatory Authorities. In this case, the display willonly show approved units. NOTE: A low spare tire will not cause the Tire Pressure Monitoring Telltale...

The EVIC will display the “CHECK TPM SYSTEM”message for 3 seconds. This text message is then followedby a graphic, with “- -“ displayed for the pressure valueindicating which of the Tire Pressure Monitoring Sen-sor(s) is not being received. If the ignition key is cycled, this sequence will repeat,pr...

• The use of fuel additives which are now being sold asoctane enhancers is not recommended. Most of theseproducts contain high concentrations of methanol.Fuel system damage or vehicle performance problemsresulting from the use of such fuels or additives is notthe responsibility of the manufacturer. ...

ADDING FUEL Fuel Filler Cap (Gas Cap) The gas cap is behind the fuel filler door, on the left rearquarter panel of the vehicle. If the gas cap is lost ordamaged, be sure the replacement cap is for use with thisvehicle. CAUTION! Damage to the fuel system or emission controlsystem could result from us...

WARNING! • Never have any smoking materials lit in or nearthe vehicle when the gas cap is removed or thetank filled. • Never add fuel when the engine is running. Thisis in violation of most state and federal fireregulations and will cause the malfunction indi-cator light to turn on. NOTE: Tighten th...

CAUTION! Damage to the fuel system or emission controlsystem could result from using an improper fueltank filler cap (gas cap). A poorly fitting cap could letimpurities into the fuel system. WARNING! • Never add fuel when the engine is running. • Never have any smoking materials lit in or nearthe ve...

TRAILER TOWING In this section you will find safety tips and informationon limits to the type of towing you can reasonably dowith your vehicle. Before towing a trailer carefully re-view this information to tow your load as efficiently andsafely as possible. To maintain warranty coverage, follow the ...

Trailer Hitch Classification Class Max. GTW (Gross Trailer Wt.) Class I - Light Duty 2,000 lbs (907 kg) Class II - MediumDuty 3,500 lbs (1587 kg) Class III - Heavy Duty 5,000 lbs (2268 kg) Class IV - ExtraHeavy Duty 10,000 lbs (4540 kg) All trailer hitches should be professionally installed onyour v...

Note 1 – The trailer tongue weight must be considered aspart of the combined weight of occupants and cargo, andshould never exceed the weight referenced on the Tireand Loading Information placard. Refer to the Tire–Safety Information Section in this manual. Trailer and Tongue Weight Always load a tr...

must be considered as part of the total load on yourvehicle. Refer to the Tire and Loading Information plac-ard in the Tire Safety Information Section of this manualfor the maximum combined weight of occupants andcargo for your vehicle. Towing Requirements To promote proper break-in of your new vehi...

• Vehicles with trailers should not be parked on a grade.When parking, apply the parking brake on the towvehicle. Put the tow vehicle automatic transmission inP for Park. With a manual transmission, shift thetransmission into reverse. Always, block or ⬙ chock ⬙ the trailer wheels. • GCWR must not be...

Towing Requirements — Trailer Brakes − Do not interconnect the hydraulic brake system or vacuum system of your vehicle with that of the trailer.This could cause inadequate braking and possiblepersonal injury. − An electronically actuated trailer brake controller is required when towing a trailer wit...

Towing Requirements — Trailer Lights & Wiring Whenever you pull a trailer, regardless of the trailer size,stop lights and turn signals on the trailer are required formotoring safety. The Trailer Tow Package may include a 4 and 7 pinwiring harness. Use a factory approved trailer harnessand connec...

Towing Tips Before setting out on a trip, practice turning, stoppingand backing the trailer in an area away from heavytraffic. If using a manual transmission vehicle for trailer towing,all starts must be in FIRST gear to avoid excessive clutchslippage. Towing Tips — Electronic Speed Control (IfEquip...

− Refer to Cooling System Operating information in the Maintenance section of this manual for more informa-tion. RECREATIONAL TOWING (BEHINDMOTORHOME, ETC.) Towing This Vehicle Behind Another Vehicle (Flattowing with all four wheels on the ground) CAUTION! DO NOT FLAT TOW any continuously variableAU...

WHAT TO DO IN EMERGENCIES CONTENTS 䡵 Hazard Warning Flasher . . . . . . . . . . . . . . . . . 266 䡵 If Your Engine Overheats . . . . . . . . . . . . . . . . 266 䡵 Automatic Transaxle Overheating . . . . . . . . . . 267 䡵 Jacking And Tire Changing . . . . . . . . . . . . . . . 268 ▫ Jack Location . ....

HAZARD WARNING FLASHER The flasher switch is located on the instrumentpanel, below the radio. Depress the switch andboth cluster indicators and all front and reardirectional signals will flash. Depress the switch again to turn Hazard Warning Flashers off. Do not use this emergency warning system whe...

removes this heat. You can also turn the Temperaturecontrol to maximum heat, the Mode control to floor, andthe fan control to High. This allows the heater core to actas a supplement to the radiator and aids in removing heatfrom the engine cooling system. CAUTION! Driving with a hot cooling system co...

JACKING AND TIRE CHANGING WARNING! • Being under a jacked-up vehicle is dangerous.The vehicle could slip off the jack and fall on you.You could be crushed. Never put any part of yourbody under a vehicle that is on a jack. Never startor run the engine while the vehicle is on a jack. Ifyou need to get...

Preparations For Jacking Park the vehicle on a firm level surface, avoid ice orslippery areas, set the parking brake and place the gear selector in PARK (automatic transaxle) or REVERSE(manual transaxle). Turn OFF the ignition. WARNING! Do not attempt to change a tire on the side of thevehicle close...

WARNING! To avoid possible personal injury, handle the wheelcovers with care to avoid contact with any sharpedges. NOTE: The wheel cover is held on the wheel by the wheel nuts. When reinstalling original wheel, properlyalign the wheel cover to the valve stem, place the wheelcover onto the wheel, the...

8. Start the engine in the vehicle that has the boosterbattery, let the engine idle a few minutes, then start theengine in the vehicle with the discharged battery. 9. When removing the jumper cables, reverse the se-quence exactly. Be careful of the moving belts and fan. FREEING A STUCK VEHICLE NOTE:...

Without The Ignition Key Special care must be taken when the vehicle is towedwith the ignition in the LOCK position. A dolly should beused under the front wheels if the rear wheels are raised.Proper towing equipment is necessary to prevent dam-age to the vehicle. Battery power is required to release...

MAINTAINING YOUR VEHICLE CONTENTS 䡵 Engine Compartment — Gasoline Engines . . . 279 䡵 Onboard Diagnostic System — OBD II . . . . . . 280 ▫ Loose Fuel Filler Cap Message . . . . . . . . . . . . 280 䡵 Emissions Inspection AndMaintenance Programs . . . . . . . . . . . . . . . . . . 281 䡵 Replacement Pa...

ENGINE COMPARTMENT — GASOLINE ENGINES MAINTAINING YOUR VEHICLE 279 7

ONBOARD DIAGNOSTIC SYSTEM — OBD II Your vehicle is equipped with a sophisticated onboarddiagnostic system called OBD II. This system monitorsthe performance of the emissions, engine, and automatictransaxle control systems. When these systems are oper-ating properly, your vehicle will provide excelle...

This might indicate a damaged cap. If the problem isdetected twice in a row, the system will turn on theMalfunction Indicator Light (MIL). Resolving the prob-lem will turn the MIL light off. EMISSIONS INSPECTION AND MAINTENANCEPROGRAMS In some localities, it may be a legal requirement to passan insp...

WARNING! You can be badly injured working on or around amotor vehicle. Only do service work for which youhave the knowledge and the proper equipment. Ifyou have any doubt about your ability to perform aservice job, take your vehicle to a competent me-chanic. MAINTENANCE PROCEDURES The pages that fol...

The best time to check the engine oil level is about 5minutes after a fully warmed engine is shut off. Do notcheck oil level before starting the engine after it has satovernight. Checking engine oil level when the engine iscold will give you an incorrect reading. Checking the oil while the vehicle i...

• Trailer towing. • Taxi, Police or delivery service (commercial service). • Off-Road or desert operation. NOTE: If ANY of these apply to you then change your engine oil every 3,000 miles (5 000 km) or 3 months,whichever comes first, and follow schedule “B—AllEngines” of the ⬙ Maintenance Schedules ...

such a product, use only those oils that are American Petroleum Institute (API) Certified and have the recom-mended SAE viscosity grade. Follow the maintenanceschedule that describes your driving type. Materials Added To Engine Oils The manufacture strongly recommends against the addi-tion of any ad...

plug. Refer to the Engine data Label located under thehood for the proper type of spark plug for use in yourvehicle. Catalytic Converter The catalytic converter requires the use of unleaded fuelonly. Leaded gasoline will destroy the effectiveness of thecatalyst as an emission control device. Under n...

In unusual situations involving grossly malfunctioningengine operation, a scorching odor may suggest severeand abnormal catalyst overheating. If this occurs, stopthe vehicle, turn off the engine and allow it to cool.Service, including a tune up to manufacturers specifica-tions, should be obtained im...

WARNING! The air cleaner can provide a measure of protectionin the case of engine backfire. Do not remove the aircleaner unless such removal is necessary for repair ormaintenance. Make sure that no one is near theengine compartment before starting the vehicle withthe air cleaner removed. Failure to ...

CAUTION! It is essential when replacing the cables on thebattery that the positive cable is attached to thepositive post and the negative cable is attached to thenegative post. Battery posts are marked positive (+)and negative (-) and identified on the battery case.Cable clamps should be tight on th...

Refrigerant Recovery and Recycling R-134a Air Conditioning Refrigerant is a hydrofluorocar-bon (HFC) that is endorsed by the Environmental Pro-tection Agency and is an ozone-saving product. How-ever, the manufacturer recommends that air conditioningservice be performed by dealers or other service fa...

Body Lubrication Locks and all body pivot points, including such items asseat tracks, doors, liftgate and hood hinges, should belubricated periodically to assure quiet, easy operationand to protect against rust and wear. Prior to the appli-cation of any lubricant, the parts concerned should bewiped ...

checked for fluid level at regular intervals. Fill thereservoir with windshield washer solvent (not radiatorantifreeze). Exhaust System The best protection against carbon monoxide entry intothe vehicle body is a properly maintained engine exhaustsystem. If you notice a change in the sound of the exh...

CAUTION! Mixing of coolants other than specified Hybrid Or-ganic Additive Technology (HOAT) engine coolants,may result in engine damage and may decreasecorrosion protection. If a non-HOAT coolant is intro-duced into the cooling system in an emergency, itshould be replaced with the specified coolant ...

Please note that it is the owner’s responsibility to main-tain the proper level of protection against freezing ac-cording to the temperatures occurring in the area wherethe vehicle is operated. NOTE: Mixing coolant types will decrease the life of the engine coolant and will require more frequent coo...

ground. If ingested by a child, contact a physicianimmediately. Clean up any ground spills immediately. Coolant Level The coolant bottle provides a quick visual method fordetermining that the coolant level is adequate. With theengine idling and warm to normal operating tempera-ture, the level of the...

WARNING! Riding the brakes can lead to brake failure andpossibly an accident. Driving with your foot restingor riding on the brake pedal can result in abnormallyhigh brake temperatures, excessive lining wear, andpossible brake damage. You wouldn’t have your fullbraking capacity in an emergency. Brak...

Brake Master Cylinder The fluid level in the master cylinder should be checkedwhen performing under hood services, or immediately ifthe brake system warning lamp is on. Be sure to clean the top of the master cylinder area beforeremoving the cap. If necessary, add fluid to bring thefluid level up to ...

WARNING! Overfilling the brake fluid reservoir can result inspilling brake fluid on hot engine parts and thebrake fluid catching fire. Use only brake fluid that has been in a tightly closedcontainer to avoid contamination from foreign matter. Do not allow petroleum based fluid to contaminate thebrak...

Power Transfer Unit (PTU) – AWD/4WD ModelsOnly Lubricant Selection Use only manufacturers recommended fluid. Refer toFluids, Lubricants and Genuine Parts for correct fluidtype. Fluid Level Check Visually inspected the unit at each oil change for leakage.If leakage is detected, Check the fluid level ...

• Stone and gravel impact. • Insects, tree sap and tar. • Salt in the air near sea coast localities. • Atmospheric fallout/industrial pollutants. Washing • Wash your vehicle regularly. Always wash your ve-hicle in the shade using Mopar Car Wash or a mild carwash soap, and rinse the panels completely...

the elements. When cleaning the rear view mirror, spraycleaner on the towel or rag that you are using. Do notspray cleaner directly on the mirror. Instrument Panel Cover The instrument panel cover has a low glare surface whichminimizes reflections in the windshield. Do not useprotectants or other pr...

CAUTION! • When installing the Integrated Power Modulecover, it is important to ensure the cover is prop-erly positioned and fully latched. Failure to do somay allow water to get into the Integrated PowerModule, and possibly result in an electrical sys-tem failure. • When replacing a blown fuse, it ...

LIGHTS BULBS — Outside Bulb No. Low Beam/High Beam Headlight . . . . . . . . . . . . H13 Front Park/Turn Signal/SideMarker Light . . . . . . . . . . . . . . . . . . . . . . . 3157NAK Front Fog Light . . . . . . . . . . . . . . . . . . . . . . . . . 9145 Center High Mounted StopLight (CHMSL) . . . . ...

4. Remove bulb from socket and replace. License Lights 1. Use a screw driver to gently pry against the side of thesnap tab to remove the lamp from the liftgate. Removing Bulb From Socket Prying Lamp from Liftgate 314 MAINTAINING YOUR VEHICLE

2. Rotate the socket 1/4 turn counterclockwise. 3. Pull bulb from socket. Center High-Mounted Stoplight Light is an LED assembly. See your authorized dealer forreplacement. Removing Socket from Lamp Removing Bulb From Socket MAINTAINING YOUR VEHICLE 315 7

FLUIDS AND CAPACITIES U.S. Metric Fuel (Approximate) 13.5 Gallons 51.0 Liters Engine Oil-With Filter All Gasoline Engines (Use API Certified SAE 5W-20 Engine Oil.) 4.5 Quarts 4.26 Liters Cooling System * Mopar 威 Antifreeze/Coolant 5 Year/100,000 Miles Formula), or equivalent. 7.2 Quarts 6.8 Liters *...

MAINTENANCE SCHEDULES CONTENTS 䡵 Emission Control System Maintenance . . . . . . 320 䡵 Maintenance Schedules . . . . . . . . . . . . . . . . . . 320 ▫ Schedule “B” . . . . . . . . . . . . . . . . . . . . . . . . 323 ▫ Schedule “A” . . . . . . . . . . . . . . . . . . . . . . . . 332 8 M A I N TE N A ...

NOTE: If ANY of these apply to you then change your engine oil every 3,000 miles (5 000 km) or 3 months,whichever comes first and follow schedule “B” of the ⬙ Maintenance Schedules ⬙ section of this manual. NOTE: If ANY of these apply to you then change your coolant every 102,000 miles (170 000 km) ...

Miles 3,000 6,000 9,000 12,000 15,000 (Kilometers) (5 000 ) (10 000 ) (15 000) (20 000) (25 000) Change engine oil and engine oil filter, or at 3months whichever comes first. X X X X X Rotate tires. X X Check spare tire for proper pressure and correctstowage. X X Inspect engine air cleaner filter, r...

Miles 18,000 21,000 24,000 27,000 30,000 (Kilometers) (30 000) (35 000) (40 000) (45 000) (50 000) Change engine oil and engine oil filter, or at 3months whichever comes first. X X X X X Rotate tires. X X X Check spare tire for proper pressure and correctstowage. X X X Inspect brake linings. X Repla...

Miles 48,000 51,000 54,000 57,000 60,000 (Kilometers) (80 000) (85 000) (90 000) (95 000) (100 000) Change engine oil and engine oil filter, or at 3months whichever comes first. X X X X X Change Automatic Transaxle (CVT) Fluid and Filter X Change Manual Transaxle Fluid. X Change Rear Drive Assembly ...

Miles 93,000 96,000 99,000 102,000 (Kilometers) (155 000) (160 000) (165 000) (170 000) Change engine oil and engine oil filter, or at 3 monthswhichever comes first. X X X X Change Manual Transaxle Fluid. X Rotate tires. X X Check spare tire for proper pressure and correct stowage. X X Flush and rep...

Miles 105,000 108,000 111,000 114,000 117,000 120,000 (Kilometers) (175 000) (180 000) (185 000) (190 000) (195 000) (200 000) Change engine oil and engine oil filter, or at 3months whichever comes first. X X X X X X Change Automatic Transaxle (CVT) Fluid andFilter X Change Rear Drive Assembly (RDA)...

Schedule “A” Miles 6,000 12,000 18,000 24,000 30,000 (Kilometers) (10 000) (20 000) (30 000) (40 000 ) (50 000) [Months] [6] [12] [18] [24] [30] Change engine oil and engine oil filter. X X X X X Rotate tires. X X X X X Check spare tire for proper pressure and correctstowage. X X X X X Inspect brake...

Miles 102,000 108,000 114,000 120,000 (Kilometers) (170 000) (180 000) (190 000) (200 000) [Months] [102] [108] [114] [120] Change engine oil and engine oil filter. X X X X Change Rear Drive Assembly (RDA) fluid. X Change Power Transfer Unit (PTU) fluid. X Rotate tires. X X X X Check spare tire for ...

IF YOU NEED CONSUMER ASSISTANCE CONTENTS 䡵 Suggestions For Obtaining ServiceFor Your Vehicle . . . . . . . . . . . . . . . . . . . . . . . 338 ▫ Prepare For The Appointment . . . . . . . . . . . . 338 ▫ Prepare A List . . . . . . . . . . . . . . . . . . . . . . . . 338 ▫ Be Reasonable With Requests ...

Service Contract You may have purchased a service contract for yourvehicle to help protect you from the high cost of unex-pected repairs after your manufacturer’s new vehiclelimited warranty expires. The manufacturer stands be-hind only the manufacturer’s Service Contracts. If youpurchased a manufac...

REPORTING SAFETY DEFECTS In the 50 United States and Washington D.C.: If youbelieve that your vehicle has a defect, which could causea crash or cause injury or death, you should immediatelyinform the National Highway Traffic Safety Administra-tion (NHTSA) in addition to notifying the manufacturer. I...

B-Pillar Location . . . . . . . . . . . . . . . . . . . . . . . 229 Brake Assist System . . . . . . . . . . . . . . . . . . . . . 118Brake Control System, Electronic . . . . . . . . . . . 118 Brake Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . 318Brake, Parking . . . . . . . . . . . . ...

Fabric Care . . . . . . . . . . . . . . . . . . . . . . . . . . . 305Filler Location Fuel . . . . . . . . . . . . . . . . . . . . . 144Filters Air Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . 288Engine Fuel . . . . . . . . . . . . . . . . . . . . . . . . . 288Engine Oil . . . . . . . ...

Oil Pressure . . . . . . . . . . . . . . . . . . . . . . . . . 145Rear Fog . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152Seat Belt Reminder . . . . . . . . . . . . . . . . . . . . 145Security Alarm (Theft Alarm) . . . . . . . . . . . . . 25Theft Alarm (Security Alarm) . . . . . . . . . ...

Navigation Radio . . . . . . . . . . . . . . . . . . . . . . . 192Navigation System . . . . . . . . . . . . . . . . . . . . . . 192New Vehicle Break-In Period . . . . . . . . . . . . . . . 61 Occupant Classification System (OCS) . . . . . . . . 44Occupant Restraints (Sedan) . . . . . . . . . . . . ....

Transmitter Programming(Remote Keyless Entry) . . . . . . . . . . . . . . . . . . . 22Transporting Pets . . . . . . . . . . . . . . . . . . . . . . . . 60Tread Wear Indicators . . . . . . . . . . . . . . . . . . . 238 Trip Odometer . . . . . . . . . . . . . . . . . . . . . . . . . 147Trip Odometer R...