Page 2 - ONE-YEAR LIMITED WARRANTY; at residence of owner are considered as commercial service.)
ONE-YEAR LIMITED WARRANTY This lawn mower is warranted for one( 1) year from date of delivery against all defects in materials and workmanship. Lawn mowers used for commercial service are warranted for 30 days from date of delivery. (Lawn mowers other than those used only at residence of owner are c...
Page 3 - READ CAREFULLY
IMPORTANT! The Dixon ZTR mower is both easy and fun to operate. However, any power mower must be operated properly to be safe. It is not a toy or a recreational vehicle. Before you start to use the mower, read the operator's manual carefully, and become completely familiar with the controls. Your Di...
Page 4 - DURING MOWER OPERATION; any
SERIAL NUMBERS The lawn mower has two serial numbers: Mower Number — Located on frame at right rear transaxle mount. Transaxle Number — Located on transaxle. SAFETY INSTRUCTIONS BEFORE MOWING: 1. Discuss proper maintenance with your Dixon dealer, to save money and prevent injury. Consult your dealer...
Page 5 - IMPORTANT OPERATING INSTURCTIONS
across walks or objects that project above the surface. 9. When th e mower is not in use, turn the engine off; never leave the engine running unattended. Your Dixon mower is equipped with a weight-sensitive switch that kills the engine when operator leaves the seat while blades are engaged. 10. Befo...
Page 6 - ALWAYS SET PARKING.BRAKE BEFORE DISMOUNTING.; Slight movements — fingertip control — is all that's
ing rope as soon as engine starts. To stop engine turn key to "OFF" position. 5. Set engine to desired speed by adjusting throttle control. (Suggest set at slow speed during initial operation.) 6. NOTE SAFETY FEATURE: Engine stops automatically if operator leaves seat while blades are engage...
Page 7 - MAINTENANCE; PRE-STARTING INSTRUCTIONS
ALWAYS DISENGAGE BLADE OPERATION BEFORE DISMOUNTING. 9. Parking Brake: Parking brake is on right hand side of floor area and is engaged by pushing full forward with foot. To disengage, pull lever back toward operator by hand. In emergency situations, brake may be used in conjunction with the natural...
Page 8 - BODY REMOVAL
BODY REMOVAL A. ZTR-421 Body Removal 1. Disconnect throttle cable from engine. 2. Disconnect key switch wire loom from frame wire loom at front of body. 3. ^Disconnect seat switch wire loom from frame wire loom. This connection is located approximately level with the back of the seat on left hand si...
Page 10 - INSTALLING AND REMOVING MOWER DECK FROM FRAME
INSTALLING AND REMOVING MOWER DECK FROM FRAME 1. Attach stabilizer arms to mower deck with pins and clips as shown on drawing. 2. Attach the 1/2" dia. engaging rod with a rollpin through the engaging cam. 3. Position the drive belt on pulleys. 4. Place mower deck under unit in approximate operat...
Page 13 - PARTS LIST
PARTS LIST Part No. Name 1000 Frame Weldment (Electric) 1015 Caster Assembly 1020 Caster Axle 1022 Caster Wheel & Tire 1029L Lift Lever & Quadrant Left 1039 Lower Lift Link 1040 Lift Tie Rod 1043 Battery Strap 1100 Frame Weldment (Manual) 1500 Lower Control Lever 1501R Upper Control Lever Ri...
Page 14 - Part No. Name
Part No. Name 4035 Switchground Wire, ZTR-423 4036 Micro Switch 4037 Front Wire Loom, ZTR-421 4038 Pan By-Pass Plug 4050 Body-White 4051 Body - Blue 5000 Transaxle 5003L Support - Left 5003R Support - Right 5004R Support Assembly Right 5004L Support Assembly Left 5005 Discup 5006 Spacer 5007 Center ...
Page 15 - OWNER INFORMATION; Oil changed this date:
OWNER INFORMATION Date Mower Purchased ______________________ Mower Model Number_____________________________ Mower Purchased from ______________________________________________________________________ dealer name & address Mower serial number ____________________________ Transaxle Serial Number...
Page 16 - Dixon Industries Inc. Box 494 Coffeyville, Kansas 67337
® Dixon and ZTR are the trademarks of Dixon Industries Inc. Box 494 Coffeyville, Kansas 67337 LITHO IN U.S.A. FORM NO. 812-476