Page 2 - IMPORTANT; Note also the information presented on the appliance; Operate this unit only on a firm, flat surface.
IMPORTANT THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE. Note also the information presented on the appliance CAUTION: FAILURE TO FOLLOW THESE INSTRUCTIONS MAY CAUSE INJURY AND/ OR DAMAGE AND MAY INVALIDATE YOUR WARRANTY Please read the operating instructions carefull...
Page 3 - drop or insert any object or fingers into any openings.
• Children should be supervised to ensure they do not play with the appliance. • WARNING : To avoid danger of suffocation please remove all packaging materials particularly plastic and EPS and keep these away from vulnerable people, children and babies. • NEVER drop or insert any object or fingers i...
Page 5 - Specification
Model no. DCPF50MB Colour Matte Black Power supply 220-240V~, 50/60Hz Rated power 135W Speed settings 3 Modes - Timer - Remote control - Adjustable height Yes - Max height 1.5m Tilt adjustable head Y Horizontal oscillation Y Noise level 73dB(A) Weight (net) 14kg Dimensions (w x d x h) 580 x 380 x 15...
Page 6 - Parts; Off switch
Parts 7. Oscillation On/ Off switch 10. Motor fixing hole 14. Base 13. Pipe base cover 12. Adjustable pipe 8. Fan motor 6. Motor shaft 5. Rear grille 4. Rear grille screws 3. Fan blade 2. Grub screw 1. Front grille 16. Safety screw Rotary switch speed settings (9) 11. Adjustable pipe fixing hole &am...
Page 7 - Assembly; ON; by rotating the rotary switch (9) on the back of the fan motor; turn oscillation off, press to; OFF; . Be careful not to insert your; Operation; Adjustable pipe fixing
Assembly 1. Assemble the base (14) to the adjustable pipe (12) by holding the base on it's side, and inserting the pipe into the centre. Secure the pipe (12) to the base (14) with the supplied 19mm bolt & washer (15). Firmly tighten with a 19mm spanner (not supplied). 2. To assemble the fan moto...
Page 8 - Cleaning; for any stubborn marks.; Do not; use abrasive sponges, scouring pads, or a stiff brush to clean the; Turn the unit off, unplug and take care of the mains lead & plug.
Cleaning Over time, dust can accumulate on the front & rear grille cover and fan blades, which can affect the fans performance. It is recommended to clean the fan at least once a month. 1. Turn the unit OFF and disconnect the appliance from the power supply.2. Remove any dust build up with a sof...
Page 9 - Maintenance; Warranty; Glen Dimplex Australia Pty Ltd; Australia
If the unit fails to operate efficiently, is broken or other problems arise, unplug and do not operate. Ask for advice by calling your local after sales service agent or the Customer Care Centre on 1300 556 816 (AU) / 0800 666 2824 (NZ). Maintenance Recycling: Do not dispose of electrical appliances...