Dimplex DCACP30DC - Manuals

Page 2 - for the first time and keep them in a safe place.; WARNING; that you can quickly disconnect the plug if necessary.; INDOOR RESIDENTIAL; To avoid a fire or electrocution hazard,; NEVER; IMPORTANT; THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND; Note also the information presented on the appliance

CAUTION: FAILURE TO FOLLOW THESE INSTRUCTIONS MAY CAUSE INJURY AND/OR DAMAGE AND MAY INVALIDATE YOUR WARRANTY Please read the operating instructions carefully before using your air circulator for the first time and keep them in a safe place. WARNING – This appliance must not be used in a bathroom. W...

Page 5 - Specification

Model no. DCACP30DC Power supply 220-240V~, 50Hz Rated power 35W Speed settings 30 Modes 3 Timer 12 hours Air movement 25m³/min Air speed 7.5m/s Up / Down oscillation 80 degrees Left / Right oscillation 80 degrees Noise level (MAX) 55dB(A) Weight (net) 3.4kg Dimensions (w x d x h) 320 x 360 x 718-85...

Page 6 - How It Works; entire room more comfortable to be in.; Where To Position

How It Works In contrast to a traditional fan which brings only cooling benefits when directly facing you; an air circulator works for any season, keeping the air in motion and making the entire room more comfortable to be in. Most fans simply lack the aerodynamics to keep the air in the room in mot...

Page 7 - Parts; Extension button

Parts Brand badge Front grille Dial Remote receiver Extension button Base Remote Control Storage Rear grille Remote Control 7

Page 8 - Fan speed increase /

Control Panel & LED Display Timer Natural Mode Up/Down Oscillation Left/Right Oscillation Sleep Mode On/Off Fan SpeedSet Timer LED Display Dial Remote Control Mode button Up/Down oscillation button Fan speed increase / decrease button On/Off button Timer increase/ decrease button Left/Right osci...

Page 9 - Operation

Operation Natural Mode Sleep Mode On/Off ON/OFF When in standby mode, press the On/Off button on either the control panel or remote control to turn the unit ON . The On/Off & fan speed indicator lights will illuminate, and the LED Display will show the current fan speed. To turn the unit OFF , p...

Page 10 - will illuminate. The LED Display will flash and start at 1 hour.

Operation TIMER - CONTROL PANEL: The TIMER can be set to automatically turn the unit ON or OFF - up to a maximum of 12 hours. To automatically power ON : 1. Press the TIMER button on the control panel and the TIMER set indicator light will illuminate. The LED Display will flash and start at 1 hour. ...

Page 11 - fan needs to complete the above process, so it can work normally.; UP / DOWN OSCILLATION; same time. This will activate a 3D-like oscillation movement.

LEFT / RIGHT OSCILLATION • When the unit is ON press the LEFT/RIGHT button on either the control panel or remote control to begin oscillation. The LED indicator will illuminate accordingly and the unit will begin to move left to right within 80°. NOTE: When the fan is first plugged in, it will oscil...

Page 12 - for any stubborn marks.; Turn the unit off, unplug and take care of the mains lead & plug.; Cleaning; CLEANING THE FAN BLADE

Over time, dust can accumulate on the grille covers and fan blades, which can affect the fans performance. It is recommended to clean the fan at least once a month. 1. Turn the unit OFF and disconnect the appliance from the power supply.2. Remove any dust build up with a soft brush.3. To clean the f...

Page 13 - Maintenance; Warranty; Glen Dimplex Australia Pty Ltd; Australia

If the unit fails to operate efficiently, is broken or other problems arise, unplug and do not operate. Ask for advice by calling your local after sales service agent or the Customer Care Centre on 1300 556 816 (AU) / 0800 666 2824 (NZ). Maintenance Recycling: Do not dispose of electrical appliances...