Diamond Audio HA 750.1 - Manuals

7 Mounting Locations Engine CompartmentNever mount this unit in the engine compartment. Mounting the unit in the engine compartment will void your warranty. Trunk MountingMounting the amplifier vertically will provide adequate cooling of the amplifier. If you will be mounting it to an existing panel...

9 Connecting Multiple Speakers If you must connect more than one speaker per channel, there are two methods in which to do so: Series or Parallel. Parallel connections are harder on the amplifier than series connections, as the total impedance is lower compared to driving a single speaker, and the a...

10 Installing the Remote Level Controller The HA 750.1 comes packaged with a remote level control. This allows you to control the level by attenuating the amplitude or increasing (up to the maximum set-point) of the amplifier’s input gain control. This control does not add additional gain, it simply...

11 Adjustment of Built-In Crossover (All Models)Placing the switch in the OFF position sets the amplifier to Full Range . This setting allows ALL frequencies to pass to the speakers. (Not available on HA 750.1). Placing the switch in the ON position activates the crossover. Placing the switch in the...

041807 Diamond Audio Warranty Diamond Audio Technologies, (DAT) warrants this product to be free from defects in material and workmanship for a period of one (1) year from the original date of purchase provided it was purchased from an authorized DAT retailer within the United States. However, if th...