Page 5 - English; The declared vibration emission level; You have chosen a; Technical Data
English 3 DCD991 DCD996 Screwdriving Vibration emission value a h = m/s 2 <2.5 <2.5 Uncertainty K = m/s 2 1.5 1.5 The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN60745 and may be used to compare one tool with anot...
Page 6 - battery packs; EC-Declaration of Conformity; Machinery Directive; WALT; Definitions: Safety Guidelines
4 English Charger DCB107 Mains voltage V AC 230 Battery type 10.8/14.4/18 Li-Ion Approx. charging time of battery packs min 60 (1.3 Ah) 70 (1.5 Ah) 90 (2.0 Ah) 140 (3.0 Ah) 185 (4.0 Ah) 240 (5.0 Ah) Weight kg 0.29 Charger DCB112 Mains voltage V AC 230 Battery type 10.8/14.4/18 Li-Ion Approx. chargin...
Page 7 - SAVE ALL WARNINGS AND INSTRUCTIONS; Keep work area clean and well lit.; ) Electrical safety; Do not expose power tools to rain or wet conditions.; ) Power tool use and care; Keep cutting tools sharp and clean.; ) Battery tool use and care
5 English SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. 1) Work area safety a ) Keep work area clean and well lit. Cluttered or dark areas invite accidents. b ...
Page 8 - Residual Risks; Using an Extension Cable; Chargers
6 English b ) Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire. c ) When battery pack is not in use, keep it away from other metal objects like paper clips, coins, keys, nails, screws or other small metal objects tha...
Page 9 - Charger Operation; Charge Indicators
7 English CAUTION: Children should be supervised to ensure that they do not play with the appliance. NOTICE: Under certain conditions, with the charger plugged into the power supply, the exposed charging contacts inside the charger can be shorted by foreign material. Foreign materials of a conductiv...
Page 10 - Wall Mounting; Battery Packs; READ ALL INSTRUCTIONS; Transportation
8 English Electronic Protection system XR Li-Ion tools are designed with an Electronic Protection System that will protect the battery pack against overloading, overheating or deep discharge.The tool will automatically turn off if the Electronic Protection System engages. If this occurs, place the l...
Page 11 - Battery; Use; Storage Recommendations; Example of Use and Transport Label Marking; Battery Type; Package Contents
9 English batteries (combo kits) can be air shipped as excepted if the Watt Hour rating of the battery pack is no greater than 100 Whr.Regardless of whether a shipment is considered excepted or fully regulated, it is the shipper's responsibility to consult the latest regulations for packaging, label...
Page 12 - Markings on Tool; Date Code Position; DO nOT; ASSEMBLY AND ADJUSTMENTS; To Remove the Battery Pack from the Tool
10 English 1 Kitbox1 Charger1 Side handle1 Instruction manual nOTE : Battery packs, chargers and kitboxes are not included with N-models. Battery packs and chargers are not included with NT models. B models include Bluetooth® battery packs. nOTE: The Bluetooth® word mark and logos are registered tra...
Page 13 - To reduce the risk of personal injury,; Spotlight Mode; While using the worklight in medium or
11 English Variable Speed Switch (Fig. A) To turn the tool on, squeeze the trigger switch 1 . To turn the tool off, release the trigger switch. Your tool is equipped with a brake. The chuck will stop as soon as the trigger switch is fully released. nOTE: Continuous use in variable speed range is n...
Page 14 - Low Battery Warning; ONLY; RElEAsE TRiggER iMMEDiATElY,
12 English CAUTION: When using the tool as a spotlight, be sure it is secured on a stable surface where it will not cause a tripping or falling hazard. CAUTION: Remove all accessories from the chuck before using the drill as a spotlight. Personal injury or property damage could result. Low Battery W...