Dewalt DW770- Manuals

Page 2 - English

2 English (original instructions) 6 Copyright D E WALT

Page 8 - E N G L I S H; D W 7 7 0 , D W 7 7 1 , D W 7 7 7 C R O S S - C U T M I T R E S AW; Technical Data; Defi nitions: Safety Guidelines; MACHINERY DIRECTIVE; Safety Instructions

E N G L I S H 6 D W 7 7 0 , D W 7 7 1 , D W 7 7 7 C R O S S - C U T M I T R E S AW Congratulations! You have chosen a D E WALT tool. Years of experience, thorough product development and innovation make D E WALT one of the most reliable partners for professional power tool users. Technical Data DW77...

Page 9 - SAVE THIS MANUAL FOR FUTURE REFERENCE; General Safety Rules; Additional Safety Rules for Mitre Saws

E N G L I S H 7 SAVE THIS MANUAL FOR FUTURE REFERENCE General Safety Rules 1. Keep work area clear. Cluttered areas and benches invite injuries. 2. Consider work area environment. Do not expose the tool to rain. Do not use the tool in damp or wet conditions. Keep the work area well lit (250 - 300 Lu...

Page 10 - Residual Risks

E N G L I S H 8 • Never use your saw without the kerf plate. • Raise the blade from the kerf in the workpiece prior to releasing the switch. • Before each cut ensure that the machine is stable. • Do not wedge anything against the fan to hold the motor shaft. • The blade guard on your saw will automa...

Page 11 - INTENDED USE; Electrical Safety; ASSEMBLY

E N G L I S H 9 l. Mitre arm m. Mitre latch n. Rotating table/mitre arm o. Mitre scale p. Sliding fence q. Dust extraction nozzle (optional for DW770) r. Traverse lock s. Guard lock up hook t. Bevel clamp handle u. Bevel scale v. Bench mounting holes w. Lock down button x. Traverse bars y. Saw head ...

Page 12 - ADJUSTMENTS

E N G L I S H 10 Mounting the Saw Blade (fi g. 1, 8–10) WARNING: To reduce the risk of injury, turn unit off and disconnect machine from power source before installing and removing accessories, before adjusting or changing set-ups or when making repairs. Be sure the trigger switch is in the OFF posi...

Page 13 - OPERATION; TO INSTALL CLAMP

E N G L I S H 11 • Although this saw will cut wood and many nonferrous materials,these operating instructions refer to the cutting of wood only. The sameguide-lines apply to the other materials. Do not cut ferrous (iron and steel) materials or masonry with this saw! Do not use any abrasive discs! • ...

Page 14 - CUTTING SHORT MATERIAL; MAINTENANCE

E N G L I S H 12 3. Loosen the knob to adjust the clamp up or down, then use the fine adjust knob to firmly clamp the workpiece. NOTE: Place the clamp on the right side of the base when beveling. ALWAYS MAKE DRY RUNS (UNPOWERED) BEFORE FINISH CUTS TO CHECK THE PATH OF THE BLADE. ENSURE THE CLAMP DOE...

Page 15 - Cleaning; Mounting the saw blade; Optional Accessories; RANGE OF SAW BLADES AVAILABLE (RECOMMENDED BLADES); Protecting the Environment; 0 DAY NO RISK SATISFACTION GUARANTEE

E N G L I S H 13 Cleaning Before use, carefully check the upper blade guard, movable lower blade guard as well as the dust extraction tube to determine that it will operate properly. Ensure that chips, dust or workpiece particle cannot lead to blockage of one of the functions. In case of workpiece f...

Page 16 - KALE

Belgique et Black & Decker - D E WALT Dutch Tel: 32 70 220 063 Fax: 32 70 225 585 Luxembourg Nieuwlandlaan 7, IZ Aarschot B156 French Tel: 32 70 220 062 Fax: 32 70 222 441 België en B-3200 Aarschot www.dewalt.be Luxemburg Danmark D E WALT Tlf: 70201511 Sluseholmen 2-4 Fax: 70224910 2450 Københav...