Dewalt DW718SP - Manuals

Dewalt DW718SP – Manual in PDF format online.

Manuals:

Manual Dewalt DW718SP

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7

Summary

Page 2 - Electrical Connection

WARNING: Do not connect unit to electrical power source until complete instructions are read and understood. WARNING: Always wear proper personal hearing protection that conforms to ANSI S12.6 (S3.19) during use. Under some conditions and duration of use, noise from this product may contribute to he...

Page 3 - Special Cuts; and the screw tightened before activating the saw.; WARNING: To reduce the risk of serious personal injury, ALWAYS

45º bevel - Left Max. Height 2.4" (61 mm) Result Width 12.9" (328 mm) Max. Width 13.6" (345 mm) Result Height 1.9" (48 mm) 45º bevel - Right Max. Height 1.7' (43 mm) Result Width 12.9" (328 mm) Max. Width 13.6" (345 mm) Result Height 1.1" (28 mm) Your saw is capable of cu...

Page 4 - Brushes; WALT brushes. Use of the correct grade of brush is; Controls; CROWN MOLDING FLAT ON TABLE

Tighten the center nut. The 45º bevel stops require adjustment after the bevel square to table adjustment is complete. BEVEL POINTER (FIG. 8) If the bevel pointers do not indicate zero, loosen each screw that holds each bevel pointer in place and move them as necessary. BEVEL STOP 45º RIGHT AND LEFT...

Dewalt Manuals