Dewalt DW03101- Manuals

Dewalt DW03101 7 EN Measuring Functions Measuring single distance 1 Aim active laser at target. 2 8.532 m 3 i Target surfaces: Measuring errors can occur when meas- uring to colourless liquids, glass, styrofoam or semi-per- meable surfaces or when aiming at high gloss surfac- es. Against dark surfac...

Dewalt DW03101 Measuring Functions 8 EN Area 1 1x 2 Aim laser at first target point. 3 4 Aim laser at sec- ond target point. 24.352 m 2 5 i The result is shown in the main line and the measured value above. 19.823 m 24.352 m 2 2 sec Circumference Area 6

Dewalt DW03101 Measuring Functions 9 EN Volume 1 2x 2 Aim laser at first target point. 3 4 Aim laser at sec- ond target point. 5 6 Aim laser at third target point. 78.694 m 3 7 i The result is shown in the main line and the measured value above. 208.703 m 2 80.208 m 78.694 m 3 2 sec Circumference Wa...

Dewalt DW03101 Measuring Functions 10 EN Triangular area 1 3x 2 Aim laser at first target point. 3 4 Aim laser at sec- ond target point. 5 6 Aim laser at third target point. 24.352 m 2 7 33.852 m 24.352 m 2 40.8 ° 2 sec Angle included by the first two measurementsCircumference Triangular area 8

Dewalt DW03101 Measuring Functions 13 EN Stake out 1 2 3 1.000 m 1 4x 0.625 m 2 Adjust value. 3 Approve value and start measurement. 4 Move device slowly along the stake-out line. The distance to the next stake out point is dis- played. 0.625 m 0.240 m 0.240 m is missing up to next 0.625 m distance....

Dewalt DW03101 Measuring Functions 14 EN Height tracking i This function displays continous- ly the tracking height if the device is turned on a tripod. No 2nd dis- tance measuring is needed as only the angle is automatically measured. 1 2x x x Aim laser at lower point. 2 3 h1 h2 h3 Aim laser at upp...

Dewalt DW03101 Measuring Functions 15 EN Memory (20 last displays) Delete Memory 8.294 m 20 20 last displays are displayed. 1 8.294 m 20 Navigates trough 20 last displays. 2 The value from the main line can be used for fur- ther calculations. 2 sec 3 2 sec simultaneously Memory is completely de- let...

Dewalt DW03101 16 EN Calibration Calibration of tilt sensor (Tilt Calibration) 1 2 sec simultane- ously 2 Place device on absolutely flat surface. 3 180° 4 Turn the device horizontally by 180° and place it again on absolutely flat sur- face. 5 6 Turn the device and place it again on absolutely flat ...

Dewalt DW03101 17 EN Technical Data * applies for 100 % target reflectivity (white painted wall), low background illumination, 25 ºC** applies for 10 to 500 % target reflectivity, high back- ground illumination, - 10 ºC to + 50 ºC*** Tolerances apply from 0.05 m to 10 m with a confi- dence level of ...

Dewalt DW03101 18 EN Message Codes If the message Error does not disappear after switching on the device repeatedly, contact the dealer. If the message InFo appears with a number, press the Clear button and observe the following instructions: Care • Clean the device with a damp, soft cloth. • Never ...

Dewalt DW03101 Safety Instructions 19 EN Permitted use • Measuring distances • Tilt measurement Prohibited use • Using the product without instruction • Using outside the stated limits • Deactivation of safety systems and removal of explanatory and hazard labels • Opening of the equipment by using t...

Dewalt DW03101 Safety Instructions 20 EN FCC statement (applicable in U.S.) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference i...