Page 3 - SAVE THESE INSTRUCTIONS
1 Definitions: Safety Guidelines The definitions below describe the level of severity for each signal word. Please read the manual and pay attention to these symbols. DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury . WARNING: Indicate...
Page 4 - Electrical Safety
2 c) Prevent unintentional starting. Ensure the switch is in the off position before plugging in. Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents. d) Remove any adjusting key or wrench before turning the power tool on. A wrench...
Page 5 - READ ALL INSTRUCTIONS
3 • Replacement of the supply cord. If the supply cord is damaged, it must be replaced by the manufacturer or an authorised D E WALT Service Centre in order to avoid a hazard. Extension Cords CAUTION: Use only extension cords that are approved by the country’s Electrical Authority. Before using exte...
Page 6 - Important Safety Instructions for All Battery Chargers
4 WARNING: Burn hazard. Battery liquid may be flammable if exposed to spark or flame. Important Safety Instructions for All Battery Chargers SAVE THESE INSTRUCTIONS: This manual contains impor tant safety and operating instructions for battery chargers. • Before using the charger, read all instructi...
Page 7 - Charge Indicators
5 • When operating a charger outdoors, always provide a dry location and use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. • Do not place any object on top of the charger or place the charger on a soft surface that might block ...
Page 8 - Important Charging Notes; SAVE THESE INSTRUCTIONS FOR FUTURE USE
6 HOT/COLD DELAY This charger has a hot/cold delay feature: when the charger detects a battery that is hot, it automatically star ts a delay, suspending charging until the battery has cooled. After the battery has cooled, the charger automatically switches to the pack charging mode. This feature ens...
Page 9 - OPERATION; installing attachments or accessories.
7 COMPONENTS (Fig. 2) WARNING: Never modify the power tool or any par t of it. Damage or personal injury could result. A. Switch E. Battery release button B. Loop F. Belt hook (optional accessory) C. Pivoting head G. Belt hook screw D. Battery pack FIG. 2 A C B D E F G D OPERATION WARNING: To reduce...
Page 10 - Cleaning; CHARGER CLEANING INSTRUCTIONS; Repairs; Lubrication
8 Cleaning WARNING: Blow dir t and dust out of all air vents with clean, dry air at least once a week. To minimize the risk of eye injury, always wear AS/NZS51337 approved eye protection when performing this. WARNING: Never use solvents or other harsh chemicals for cleaning the non-metallic par ts o...