Dewalt DCF889-XE- Manuals

Page 3 - SAFETY INSTRUCTIONS FOR POWER TOOLS

1 Definitions: Safety Guidelines The definitions below describe the level of severity for each signal word. Please read the manual and pay attention to these symbols. DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury . WARNING: Indicate...

Page 4 - GENERAL POWER TOOL SAFETY WARNINGS; SAVE ALL WARNINGS AND INSTRUCTIONS FOR

2 GENERAL POWER TOOL SAFETY WARNINGS WARNING! Read all safety warnings and all instructions Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE The term “power tool” in the warnings refers t...

Page 6 - will not cause a tripping or falling hazard.; Important Safety Instructions for All Battery Packs; READ ALL INSTRUCTIONS; Air vents often cover moving parts and should be avoided.

4 CAUTION: When not in use, place tool on its side on a stable surface where it will not cause a tripping or falling hazard. Some tools with large battery packs will stand upright on the battery pack but may be easily knocked over. • The label on your tool may include the following symbols. The symb...

Page 7 - Important Safety Instructions for All Battery Chargers

5 • Never force the battery pack into the charger. Do not modify the battery pack in any way to fit into a non-compatible charger as battery pack may rupture causing serious personal injury. Consult the char t at the end of this manual for compatibility of batteries and chargers. • Charge the batter...

Page 8 - Charge Indicators

6 • Pull by the plug rather than the cord when disconnecting the charger. This will reduce the risk of damage to the electric plug and cord. • Make sure that the cord is located so that it will not be stepped on, tripped over or otherwise subjected to damage or stress. • Do not use an extension cord...

Page 9 - Important Charging Notes

7 HOT/COLD DELAY This charger has a hot/cold delay feature: when the charger detects a battery that is hot, it automatically star ts a delay, suspending charging until the battery has cooled. After the battery has cooled, the charger automatically switches to the pack charging mode. This feature ens...

Page 10 - OPERATION

8 INTENDED USE This impact wrench is designed for professional impact fastening applications. The impact function makes this tool par ticularly useful for driving fasteners in wood, metal and concrete. DO NOT use under wet conditions or in presence of flammable liquids or gases.These heavy-duty impa...

Page 11 - To remove an accessory,

9 FUEL GAUGE BATTERY PACKS (FIG.4) Some D E WALT battery packs include a fuel gauge which consists of three green LED lights that indicate the level of charge remaining in the battery pack. To actuate the fuel gauge, press and hold the fuel gauge button (I). A combination of the three green LED ligh...

Page 12 - CHARGER CLEANING INSTRUCTIONS; Repairs

10 CAUTION: Ensure fastener and/or system will withstand the level of torque generated by the tool. Excessive torque may cause breakage and possible personal injury. 1. Place the accessory on the fastener head. Keep the tool pointed straight at the fastener. 2. Press switch to star t operation. Rele...