Dewalt DCD734- Manuals

5 ENGLISH b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. c) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. ...

6 ENGLISH g) Use the power tool, accessories and tool bits etc., in accordance with these instructions taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. 5) BATTERY TOOL US...

7 ENGLISH Important Safety Instructions for All Battery Chargers SAVE THESE INSTRUCTIONS: This manual contains important safety and operating instruc tions for the DCB105, DCB107 and DCB112 battery chargers. • Before using the charger, read all instructions and cautionary markings on charger, batter...

8 ENGLISH 2. Insert the battery pack (g) into the charger, making sure the pack is fully seated in the charger. The red (charging) light will blink continuously indicating that the charging process has started. 3. The completion of charge will be indicated by the red light remaining ON continuously....

9 ENGLISH out. The battery pack can explode in a fire. Toxic fumes and materials are created when lithium ion battery packs are burned. • If battery contents come into contact with the skin, immediately wash the area with mild soap and water. If the battery liquid gets into the eye, rinse water over...

10 ENGLISH • Check for damage to the tool, parts or accessories which may have occurred during transport. • Take the time to thoroughly read and understand this manual prior to operation. Description (fi g. 1) WARNING: Never modify the power tool or any part of it. Damage or personal injury could res...

11 ENGLISH 2. Insert battery pack into the charger as described in the charger section of this manual. FUEL GAUGE BATTERY PACKS (FIG. 2) Some D E WALT battery packs include a fuel gauge which consists of three green LED lights that indicate the level of charge remaining in the battery pack. To actua...

12 ENGLISH 2. Grasp the black sleeve of the chuck with one hand and use the other hand to secure the tool. Rotate the sleeve counterclockwise far enough to accept the desired accessory. 3. Insert the accessory about 19 mm (3/4") into the chuck and tighten securely by rotating the chuck sleeve cl...

13 ENGLISH 8. Keep the motor running when pulling the bit back out of a drilled hole. This will help prevent jamming. 9. With variable speed drills there is no need to center punch the point to be drilled. Use a slow speed to start the hole and accelerate by squeezing the trigger harder when the hol...

14 ENGLISH Separate collection of used products and packaging allows materials to be recycled and used again. Re-use of recycled materials helps prevent environmental pollution and reduces the demand for raw materials. Local regulations may provide for separate collection of electrical products from...