Page 3 - SAVE THESE INSTRUCTIONS; Definitions: Safety Guidelines
1 IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR ANY D E WALT TOOL, CALL US AT: 1800 654 155 (Aust) or 0800 339258 (NZ). SAFETY INSTRUCTIONS FOR POWER TOOLS When using power tools, always observe the safety regulations applicable in your country to reduce the risk of fire, electric shock and pe...
Page 4 - Electrical Safety
2 c) Prevent unintentional starting. Ensure the switch is in the off position before plugging in. Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents. d) Remove any adjusting key or wrench before turning the power tool on. A wrench...
Page 6 - SAVE THESE INSTRUCTIONS FOR FUTURE USE; Important Safety Instructions for Battery Chargers
4 buildup of metallic par ticles should be kept away from charger cavities. Always unplug the charger from the power supply when there is no battery pack in the cavity. Unplug charger before attempting to clean. • DO NOT attempt to charge the battery pack with any chargers other than the ones in thi...
Page 7 - Introduction; READ ALL INSTRUCTIONS; The RBRCTM Seal
5 • The charger is designed to operate on standard household electrical power. Do not attempt to use it on any other voltage. • We recommend the use of a residual current device with a rated residual current of 30 mA or less . SAVE THESE INSTRUCTIONS Introduction The DC9000-XE charger is designed to...
Page 9 - KEY FEATURES AND FUNCTIONS
7 b. Check to see if receptacle is connected to a light switch which turns power off when you turn out the lights. c. Move charger and battery pack to a location where the surrounding air temperature is approximately 18 °- 24 °C (65 °F - 75 °F). d. If charging problems persist, take the tool, batter...
Page 10 - Mode Control Collar; between drilling, screwdriving and hammerdrilling mode.
8 Mode Control Collar Your drill is equipped with a separate mode control collar (Fig. 1, C) to switch between drilling, screwdriving and hammerdrilling mode. SCREWDRIVING (FIG. 2) 1. Select the desired speed/torque range using the three-speed gear shifter (E) on the top of tool to match the speed a...
Page 14 - FREE ONE YEAR SERVICE CONTRACT
Guarantee Applicable to hand held Power Tools, Lasers and Nailers. Three Year Limited Warranty D E WALT will repair, without charge, any defects due to faulty materials or workmanship for three years from the date of purchase. Please return the complete unit, transpor tation prepaid, to any D E WALT...