Dewalt DC616- Manuals

Page 2 - Straight; TOOL SPECIFICATIONS

Angled 20˚ J H G L E D A F E A. TriggerB. Contact trip lock-off C. Depth adjustment wheel D. Headlights/Low battery indicator E. Jam clearing latch F. Contact trip G. Magazine H. Pusher I. Bump/sequential selector switch J. Reversible suspension hook K. No-mar pad L. No-mar tip storage Straight K An...

Page 3 - lis; IF YOU HAVE ANY QUESTIONS OR COMMENTS; General Safety Rules – For All; WARNING! Read and understand all; Failure to follow all instruc-; SAVE THESE INSTRUCTIONS; WORK AREA; Important Safety

E n g lis h 1 IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR ANY D E WALT TOOL, CALL US TOLL FREE AT: 1-800-4-D E WALT (1-800-433-9258) General Safety Rules – For All Battery Operated Tools WARNING! Read and understand all instructions. Failure to follow all instruc- tions listed below may resu...

Page 4 - BUMP/SEQUENTIAL SELECTOR SWITCH; Important Safety Instructions

E n g li sh 2 • Do not point the tool at co-workers or yourself at any time. No horseplay! Work safe! Respect the tool as a working imple- ment. (Fig. B) • Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control. When the tool is not in u...

Page 5 - Important Safety Instructions for; Recommended Minimum Wire Size; Using Automatic Tune-UpTM Mode

E n g lis h 3 Canada to facilitate the collection of spent nickel cadmium and nickel metal hydride batteries. Help protect our environ- ment and conserve natural resources by returning the spent nickel cadmium and nickel metal hydride batteries to an authorized D E WALT service center or to your loc...

Page 7 - Read the Safety Instruction section of this manual.; Using the Contact Trip Lock-off

3. Release the pusher. LOCK AND LOAD METHOD CAUTION: Keep fingers clear of pusher to prevent injury. CAUTION: The contact trip lock-off should always be locked off whenever any adjustments are made or when tool is not in use. 1. Pull pusher back until it locks.2. Insert fasteners into the rear of th...

Page 8 - CAUTION: Disconnect battery pack from tool before

E n g li sh 6 WARNING: Remove nails from magazine before making any adjustments or servicing this tool. Failure to do so may result in serious injury. CAUTION: Disconnect battery pack from tool before making any adjustments, changing accessories, servic- ing, or moving the tool. Such preventative sa...

Page 9 - TO REASSEMBLE NAILER; Accessories; The use of any other accessory not recom-; Three Year Limited Warranty; YEAR FREE SERVICE

E n g lis h 7 1. Align one of the rubber tabs (Y) from the new return cord assembly with the corresponding slot in the driver (Fig. 18). 2. With your finger, push and bend the rubber tab around corner (Fig. 18) while pulling the rubber cord until tab is firmly in place (Fig. 19). 3. Repeat above pro...

Page 11 - TROUBLESHOOTING GUIDE; DISCONNECT BATTERY PACK FROM TOOL BEFORE ALL REPAIRS

E n g lis h 9 TROUBLESHOOTING GUIDE MANY COMMON PROBLEMS CAN BE SOLVED EASILY BY UTILIZING THE CHART BELOW. FOR MORE SERIOUS OR PERSISTENT PROBLEMS, CONTACT A D E WALT SERVICE CENTER OR CALL 1-(800)-4-DEWALT. DISCONNECT BATTERY PACK FROM TOOL BEFORE ALL REPAIRS SYMPTOM CAUSE FIX Tool doesn’t turn on...