Page 5 - E N G L I S H; Technical data
5 E N G L I S H ANGLE GRINDERD28410/D28411/D28414/D28432C Congratulations! You have chosen a D E WALT tool. Years of experience, thorough product development and innovation make D E WALT one of the most reliable partners for professional power tool users. Technical data D28410 D28411 Voltage V 230 2...
Page 6 - General
6 E N G L I S H Safety instructions When using power tools, always observe the safety regulations applicable in your country to reduce the risk of fi re, electric shock and personal injury. Read all of this manual carefully before operating the tool. Save this manual for future reference. General 1 ...
Page 7 - 6 Avoid unintentional starting; Additional safety instructions for Australia
7 E N G L I S H 16 Avoid unintentional starting Do not carry the tool with a fi nger on the switch. Be sure that the tool is switched off before plugging in. 17 Do not abuse cord Never carry the tool by its cord. Never pull the cord to disconnect from the socket. Keep the cord away from heat, oil an...
Page 8 - Fitting a mains plug to 115 V units
8 E N G L I S H Wear ear protection Package contents The package contains: 1 Angle grinder 1 Guard 1 Side handle 1 Flange set 1 Two-pin spanner 1 Instruction manual 1 Exploded drawing • Check for damage to the tool, parts or accessories which may have occurred during transport. • Take the time to th...
Page 9 - rating; Assembly and adjustment; Fitting and removing a grinding or cutting disc
9 E N G L I S H Always ensure that the cable clamp is correctly and securely fi tted to the sheath of the cable. Using an extension cable If an extension cable is required, use an approved extension cable suitable for the power input of this tool (see technical data). The minimum conductor size is 1...
Page 10 - Lubrication; Unwanted tools and the environment; WALT AFTER SALES SERVICE; REPAIR AND SERVICE
10 E N G L I S H • Pull the spring-loaded tab (18) to unlock the rotary mechanism (fi g. E1). Hold the tab in the pulled-out position. • Rotate the handle (19) into the desired position (fi g. E2). • Release the tab and lock it in position. • Check that the rotary mechanism is locked. Do not use the...
Page 11 - GUARANTEE; THREE YEAR LIMITED WARRANTY; NOTE; 0 DAY NO RISK SATISFACTION GUARANTEE; INFORMATION HOTLINE
11 E N G L I S H GUARANTEE THREE YEAR LIMITED WARRANTY D E WALT will repair, without charge, any defects due to faulty materials or workmanship for three years from the date of purchase. Please return the complete unit, transportation prepaid, to any D E WALT Service Centre, or any authorised servic...
Page 12 - Australia; 0 Fletcher Road; New Zealand; 1 Hugo Johnston Drive
Australia Black & Decker (Australia) Pty. Ltd. Tel: 03 8720 5100 20 Fletcher Road Fax: 03 9727 5940 Mooroolbark, Victoria 3138 New Zealand Black & Decker Tel: 02 259 1111 81 Hugo Johnston Drive Fax: 09 579 8200 Penrose, Auckland, New Zealand 653602-00 5/07