Dewalt D25123 XE - Manuals

5 D25314-XE, D25315-XE FIG. 3 E D C G A B D25330-XE FIG. 4 A D F H C FIG. 1 D25123-XE, D25124-XE C B A G D F E FIG. 2 D D25213-XE A G B C E Switch To star t the rotary hammer, depress the trigger switch (D). To stop rotary hammer, release the switch. VARIABLE SPEED TRIGGER The variable speed trigger...

6 Reversing Lever (Fig. 1–4) D25123-XE, D25124-XE, D25213-XE, D25314-XE, D25315-XE The reversing lever is used to reverse the rotary hammer for backing out screws or jammed bits. It is located above the trigger, shown in Figure 2. CAUTION: When reversing to clear jammed bits, be ready for strong rea...

7 WARNING: Burn Hazard. ALWAYS wear gloves FIG. 6 D25124-XE, D25314-XE ONLY J M L K when changing bits. Accessible metal par ts on the tool and bits may get extremely hot during operation. Small bits of broken material may damage bare hands. NOTICE: Do not use chipping bits in this tool. Using chipp...

8 MAINTENANCE WARNING: Shock Hazard. To reduce the risk of serious personal injury, turn tool off and disconnect from power source before making any adjustments or removing/installing attachments or accessories. Lubrication Your tool was properly lubricated before leaving the factory. In from two to...

9 MAXIMUM RECOMMENDED CAPACITIES D25123-XE, D25124-XE D25213-XE, D25314-XE, D25315-XE Masonry 26 mm (1") Steel 12.7 mm (1/2") Wood 38 mm (1-1/2") OPTIMUM CAPACITY Masonry 4 mm - 16 mm (5/32"-5/8") Guarantee Applicable to hand held Power Tools, Lasers and Nailers. Three Year Limit...