Page 2 - LABELS; CERTIFICATION; CLASS 1; FOR CANADA MODEL ONLY; CAUTION; POUR LES MODELE CANADIENS UNIQUEMENT; ATTENTION; IMPORTANT TO SAFETY; C A U T I O N; RISK OF ELECTRIC SHOCK
2 LABELS (for U.S.A. model only) CERTIFICATION THIS PRODUCT COMPLIES WITH DHHS RULES 21 CFR SUBCHAPTERJ APPLICABLE AT DATE OF MANUFACTURE. CAUTION: 1. Handle the power supply cord carefully Do not damage or deform the power supply cord. If it is damaged ordeformed, it may cause electric shock or mal...
Page 3 - SAFETY INSTRUCTIONS
3 SAFETY INSTRUCTIONS 1. R e a d I n s t r u c t i o n s – A l l t h e s a f e t y a n d o p e r a t i n gi n s t r u c t i o n s s h o u l d b e r e a d b e f o r e t h e a p p l i a n c e i soperated. 2. Retain Instructions – The safety and operating instructionsshould be retained for future refer...
Page 7 - MAIN FEATURES; Control section; Improved visibility under low lighting conditions thanks to a; Functions; according to your needs.; CONNECTIONS/INSTALLATION
7 ENGLISH — TABLE OF CONTENTS — z Main features ...............................................................................7 x Connections/Installation ...............................................................7 c Part names and functions .......................................................
Page 8 - ENGLISH; PART NAMES AND FUNCTIONS
8 ENGLISH 3 PART NAMES AND FUNCTIONS (1) DN-2100F Front Panel q POWER button ( ¢ ON £ OFF) • Press this button to turn the power on. NOTE: • Be sure to close the disc trays before turning off the power. w POWER indicator • This red LED lights up when the power is on. e Disc tray • Place CD discs in ...
Page 11 - COMPACT DISCS; Precautions on handling compact discs
11 ENGLISH 4 COMPACT DISCS 1. Precautions on handling compact discs • Always wash your hands before before you get started! • Do not allow fingerprints, oil or dust to get on the surface of the CD disc. If the disc is dirty, wipe it off gently with a soft dry cloth. • Do not use benzene, thinner, wa...
Page 12 - Find the play start position.; Shockproof memory; BASIC OPERATION; PLAY and PAUSE; Sleep mode
12 ENGLISH Starting playback from the Middle of a track(Manual Search) ★ Once the track is selected with the track select knob and the PLAY/PAUSE button is pressed, playback starts from the beginning of that track. If you wish to start from a different position, use the procedure described below to ...
Page 13 - Select the brake or platter mode.; Key Adjust; Set the jog dial to the platter hold mode.
13 ENGLISH Brake/Plat-S ★ Use this function to achieve two effects similar to vinyl turntable. 1 Select the brake or platter mode. Press the BRAKE button.• Displays “ ” when set to Brake mode The effect sound is similar to a DJ turntable coming to aquick stop. This effect can be achieved by pressing...
Page 14 - Digital scratch; Starting seamless loop playback; Re-entering a seamless loop
14 ENGLISH 7 SEAMLESS LOOP/HOT START/STUTTER/DIGITAL SCRATCH 2 LOOP/HOT START/STUTTER ★ DN-2100F’s ASP (Audio Signal Processor) has two modes - seamless loop and digital scratch - that can be selected freely according to the purpose. ★ Use this function to play the specified section between points A...
Page 15 - Clearing all data; Clearing the A-B seamless loop; Hot Starts; CUE
15 ENGLISH Clearing all data 7 Press the FLIP button for at least 2 seconds. FLIP LOOP • All data is cleared when the the flip button is held down for 2 seconds. Off NOTE: • When A-1 or A-2 is cleared during seamless looping, it may take about 2 seconds before A-1 or A-2 can be set again. Clearing t...
Page 16 - Stuttering; Using the scratch function; Check that it is possible to start scratching.; Change the playing speed and direction of playback.
16 ENGLISH Stuttering ★ Stuttering is possible only when the seamless loop mode is off and the A1 or A2 points have been loaded. 1 In the stutter mode, press the A-1 (or A-2) button.• Playback starts immediately from the start point (A) when t h e b u t t o n i s p r e s s e d a n d s t o p s w h e ...
Page 17 - OTHER FUNCTIONS; and continuous relay mode
17 ENGLISH 8 OTHER FUNCTIONS 1. Relay play (1) Single relay mode 1 P r e s s t h e C O N T. / S I N G L E b u t t o n s e v e r a l t i m e s u n t i l“SINGLE” and “RELAY” indicator are lit on the display.• When the play finish the desired track, another CD will be started the play. • W h e n b o t ...
Page 18 - Set the preset operation selection mode.; Cancel the preset mode.; PRESET FUNCTIONS AND OPERATIONS
18 ENGLISH (2) Preset change procedure ★ The preset procedure can be performed in the cue, pause mode, when no disc is loaded or when the disc trays is open. 1 2 Set the preset operation selection mode. Press the PRESET button. Select the preset item. Turn the Track Select knob ( 8 — 9 ). ✽ The firs...
Page 19 - (3) Detailed Description of Preset Functions
19 ENGLISH (“*” indicates the default setting.) (0) Preset Clear: This restores the preset data to the factory default values. q The presettings are initialized when the TRACK SELECT knob is turned while set to “0 PS CL On”. w “0 PS CL OF” is displayed when initialization is completed. (1) DSP play ...
Page 20 - 1 SPECIFICATIONS
20 ENGLISH 11 SPECIFICATIONS GENERAL Type: Twin mechanism compact disc player with wired remote control Disc type: Standard compact discs (12 cm and 8 cm discs) Dimensions: Player unit: 482 (W) x 88 (H) x 252 (D) mm (without feet)18-31/32” (W) x 3-15/32” (H) x 9-59/64” (D) Remote control unit: 482 (...