Page 2 - SAFETY PRECAUTIONS; CAUTION; RISK OF ELECTRIC SHOCK; IMPORTANT SAFETY
I n SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle,...
Page 3 - II; NOTES ON USE; CAUTIONS ON INSTALLATION
II n NOTES ON USE WARNINGS • Avoid high temperatures. Allow for sufficient heat dispersion when installed in a rack. • Handle the power cord carefully. Hold the plug when unplugging the cord. • Keep the unit free from moisture, water, and dust.• Unplug the power cord when not using the unit for long...
Page 4 - Getting started; Basic version; Advanced version; Information; Contents
1 Thank you for purchasing this DENON product. To ensure proper operation, please read this owner’s manual carefully before using the product. After reading them, be sure to keep them for future reference. Getting started Basic version ································································...
Page 5 - Features; Easy to use, Graphical User Interface; iPod; Accessories
2 Features Fully discrete, identical quality and power for all 7 channels (165 W x 7ch) The unit is equipped with a power amplifier that reproduces highfidelity sound in surround mode with equal quality and power for all channels, true to the original sound.The power amplifier circuit adopts a discr...
Page 6 - Cautions on handling; Simultaneous playback on two HDMI channels
3 Cautions on handling • Before turning the power on Check once again that all connections are correct and that there are no problems with the connection cables. • Power is supplied to some of the circuitry even when the unit is set to the standby mode. When going on vacation or leaving home for lon...
Page 7 - Connections; For speaker connections, see; Basic v
Basic version 4 F Connections v page 5 F Settings v page 21 F Playback (Basic operation) v page 28 F Selecting a listening mode (SURROUND MODE) v page 55 Connection v page 8 , 10 Connection v page 8 , 11 Playback – Playback v page 30 Connection v page 8 , 11 Connection v page 17 Playback v page 30 P...
Page 8 - Important information; NOTE; Flow of video signals for MAIN ZONE
5 Important information • Make connections as follows before using this unit. Select an appropriate connection type according to the devices to be connected. • You may need to make some settings on this unit depending on the connection method. Refer to each description for more information. • Select...
Page 9 - Examples of screen display
6 Important information G Flow of video signals for ZONE2 H S-Video connector Video connector Monitor (TV) S-Video connector Video connector Video connector Video connector Video device This unit Output Input (IN) Output (MONITOR OUT) Input • Set when not using the video conversion function. “Video ...
Page 10 - Connecting an HDMI-compatible device
7 Connecting an HDMI-compatible device You can connect up to nine HDMI-compatible devices (7-inputs/2-outputs) to the unit. HDMI function This unit supports the following HDMI functions: • 3D• Deep Color ( v page 142 ) • Auto Lip Sync ( v page 108 , 142 ) • “x.v.Color”, sYCC601 color, Adobe RGB colo...
Page 11 - Cables used for connections
8 Connecting an HDMI-compatible device OUT HDMI G Front panel H Digital camcorder • When this unit is connected to other devices with HDMI cables, connect this unit and TV also with an HDMI cable. • When connecting a device that supports Deep Color, please use a “High Speed HDMI cable” or “High Spee...
Page 12 - Connecting to a device equipped with a DVI-D connector; Settings related to HDMI connections
9 Connecting an HDMI-compatible device Connecting to a device equipped with a DVI-D connector When an HDMI/DVI conversion cable (sold separately) is used, the HDMI video signals are converted to DVI signals, allowing connection to a device equipped with a DVI-D connector. NOTE • No sound is output w...
Page 13 - in Set as Necessary; Connecting a TV
10 Cables used for connections Video cable (sold separately) Video cable Component video cable Audio cable (sold separately) Optical cable IN VIDEO AUDIO OPTICAL OUT VIDEO COMPONENT VIDEO Y P B P R IN TV Set this to change the digital input connector or component video input connector to which the i...
Page 14 - Connecting a Blu-ray Disc player; Connecting a DVD player
11 Connecting a Blu-ray Disc player • You can enjoy video and audio from a Blu-ray Disc. • Select the connector to use and connect the device.• For instructions on HDMI connections, see “Connecting an HDMI-compatible device” ( v page 7 ). Cables used for connections Video cable (sold separately) Vid...
Page 16 - Connecting a digital video recorder
13 R L R L R L R L R L R L OUT IN AUDIO VIDEO VIDEO OUT OPTICAL IN AUDIO AUDIO OUT VIDEO OUT S-VIDEO VIDEO AUDIO Digital video recorder Set this to change the digital input connector or component video input connector to which the input source is assigned. “Input Assign” ( v page 91 ) in Set as Nece...
Page 17 - Connecting a digital camcorder; Connecting a control dock for iPod
14 Connecting a digital camcorder • You can enjoy video and audio from a digital camcorder.• For instructions on HDMI connections, see “Connecting an HDMI-compatible device” ( v page 7 ). Cables used for connections Video cable (sold separately) Video cable Audio cable (sold separately) Audio cable ...
Page 19 - Connecting an HD Radio receiver; AM loop antenna assembly
16 Connecting an HD Radio receiver • By connecting a HD Radio antenna to this unit, you can receive HD Radio programs. • HD Radio broadcasting currentry is available in the United States and select other countries. w e q FM outdoor antenna Direction of broadcasting station 75 Ω coaxial cable Ground ...
Page 20 - Connecting a record player; Connecting a CD player
17 Connecting a record player You can enjoy playing records. Cables used for connections Audio cable (sold separately) Audio cable R L R L GND AUDIO OUT L R Turntable (MM cartridge) • This unit is compatible with record players with an MM cartridge. When you connect to a record player with an MC car...
Page 21 - Connecting a external power amplifier
18 Connecting a external power amplifier • You can use this unit as a pre-amp by connecting a commercially available power amp to the PRE OUT connector. Adding a power amp to each of the channels provides an even greater sound presence. • Select the terminal to use and connect the device. Cables use...
Page 22 - Required system; Broadband internet connection
19 Connecting to a home network (LAN) • This unit lets you play via your home network (LAN) music files stored on a computer and music content such as that from Internet radio.You can also operate this unit from a computer using the Web control function. • You can update by downloading the latest fi...
Page 23 - Connecting an external control device; REMOTE CONTROL jacks; TRIGGER OUT jacks
20 Connecting an external control device REMOTE CONTROL jacks If this unit is installed in a location that is out of range of the signal from the remote control unit, you can still operate the unit and the devices connected to it by using a commercially available IR receiver.You can also use it to r...
Page 24 - df; Settings; Selecting a listening mode (SURROUND MODE); About setup microphone placement
21 The acoustic characteristics of the connected speakers and listening room are measured and the optimum settings are made automatically. This is called “Audyssey® Auto Setup”.To perform measurement, place the setup microphone in multiple locations all around the listening area. For best results, w...
Page 25 - Set up the subwoofer; When using a subwoofer with a direct mode; Set up the microphone; Set up the remote control unit; Set up the zone mode; ZONE SELECT; Press ZONE SELECT; Set up the operation mode; AMP; Press AMP
22 2 Set up the subwoofer If using a subwoofer capable of the following adjustments, set up the subwoofer as shown below. n When using a subwoofer with a direct mode Set the direct mode to “On” and disable the volume adjustment and crossover frequency setting. n When using a subwoofer without a dire...
Page 26 - ENTER; When performing Audyssey® Auto Setup over; ENTER; When measuring has stopped; RETURN; Setting up the speakers again; ENTER; ENTER
23 STEP 1 Preparation STEP 2 Detection & Measurement (Main) Set up speakers (Audyssey® Auto Setup) 4 Connect the setup microphone to the SETUP MIC jack of this unit. AUDYSSEY AUTO SETUP 1 2 3 4 5 6 Amp Assign RETURN Auto Setup Start Channel Select STEP1 Preparation Connect the speakers and place...
Page 28 - When turning Dynamic Volume® on; When turning Dynamic Volume® off; Store
25 Set up speakers (Audyssey® Auto Setup) 14 Select “Store” and then press ENTER . Save the measurement results. AUDYSSEY AUTO SETUP 1 2 3 4 5 6 STEP6 Store Now storing...Please wait. 20% AUDYSSEY AUTO SETUP 1 2 3 4 5 6 RETURN Store STEP6 Store Apply and store measurement result Enter Cancel Press “...
Page 29 - Error messages
26 Error messages NOTE • An error message is displayed if Audyssey® Auto Setup could not be completed due to speaker placement, the measurement environment, etc. If this happens, check the relevant items, be sure to take the necessary measures, then perform Audyssey® Auto Setup over again. • If the ...
Page 30 - Parameter Check; Retrieving Audyssey® Auto Setup settings; Making the network settings; page 5 “Getting Started”
27 Parameter Check This function enables you to check the measurement results and equalizer characteristics after Audyssey® Auto Setup. 1 Use ui to select “Parameter Check” and then press ENTER . SPEAKER SETUP Auto Setup Amp Assign Speaker Config. Bass Setting Distance Channel Level Audyssey Auto Se...
Page 31 - Selecting the input source; Press the input source select button; Using the knob on the main unit; SOURCE SELECT
28 Playback (Basic operation) n Playing a Blu-ray Disc player/DVD player ( v page 30 ) n Playing a CD player ( v page 30 ) n Playing an iPod ( v page 31 ) n Tuning in radio stations ( v page 35 ) n Playing a network audio ( v page 38 ) n Playing a USB memory device ( v page 53 ) Selecting a listenin...
Page 32 - Using the “SOURCE SELECT” menu; uio; Adjusting the master volume; Use; to adjust the volume.; When the “Volume Display” setting (; Turning off the sound temporarily; Press
29 n Using the “SOURCE SELECT” menu Switch the remote control unit to the J (MAIN ZONE) mode when performing this operation ( v page 121 “Operating AV devices”). If the remote control unit is in K (ZONE2) or L (ZONE3) mode, the “SOURCE SELECT” menu will not be displayed when SOURCE SELECT is pressed...
Page 33 - Playing a CD player; ON
30 Playing a Blu-ray Disc player/DVD player The following describes the procedure for playing Blu-ray Disc player/ DVD player. 1 Prepare for playback. q Turn on the power of the TV, subwoofer and player. w Change the TV input to the input of this unit. e Load the disc in the player. 2 Press ON to tu...
Page 34 - Playing an iPod; Use a DENON control dock for iPod to; Listening to music on an iPod; SEARCH; STATUS
31 Playing an iPod There are two methods for iPod playback. q Use a DENON control dock for iPod to play back. You can play back both video, photo and audio. w Connect an iPod directly to the USB port to play back ( v page 33 ). You can play back audio only. q Use a DENON control dock for iPod to pla...
Page 35 - Viewing videos on an iPod in the Browse mode; Viewing photos and videos on an iPod in the; iPod operation
32 n Viewing videos on an iPod in the Browse mode When an iPod equipped with a video function is connected to a DENON ASD-11R control dock for iPod, image files can be played in the Browse mode. 1 Use ui to select “Videos”, then press ENTER or p . 2 Use ui to select the search item or folder, then p...
Page 37 - iPod play function
34 Playing an iPod n iPod operation Operation buttons Function MENU Amp menu uio p Cursor operation / Auto search (cue, ui ) / Manual search (Press and hold, ui ) ENTER (Press and release) Enter / Pause ENTER (Press and hold) Stop SEARCH (Press and release) Page search z 1 / Character sort z 2 SEARC...
Page 38 - Tuning in radio stations; Using the HD RadioTM receiver; Listening to HD Radio stations; TUNER; Selecting audio programs; MODE
35 Tuning in radio stations Important information n Using the HD Radio™ receiver HD Radio stations offer higher sound quality than conventional FM/ AM broadcasts. It is also possible to receive data services and select broadcasts from among up to eight multicast programs.HD Radio Technology provides...
Page 39 - Presetting radio stations (Manual preset); Default settings; Specify a name for the preset broadcast station; TUNER PRESET CH –
36 Tuning in radio stations n Presetting radio stations (Manual preset) Your favorite broadcast stations can be preset so that you can tune them in easily. Multicasts can also be preset. Up to 56 stations can be preset. • Stations can be preset automatically at “Auto Preset” ( v page 95 ). If “Auto ...
Page 40 - Direct frequency tuning; Check the HD Radio reception information
37 Tuning in radio stations n Direct frequency tuning You can enter the receiving frequency directly to tune in. 1 Press SEARCH . HD Radio CH A1 MEMORY Memory SEARCH Search Now Playing Band TuningPreset CH+/- FM ---.-MHz DIRECT TUNE AUTO Input 0-9 2 Input frequencies using the 0 – 9 . • If o is pres...
Page 41 - Playing a network audio; About the internet radio function; Media player
38 Playing a network audio Follow this procedure to play Internet radio stations or music or still picture (JPEG) files stored on a computer . Important information n About the internet radio function • Internet radio refers to radio broadcasts distributed over the Internet. Internet radio stations ...
Page 42 - About Flickr
39 Playing a network audio G Compatible formats H Internet radio Media server z 1 WMA (Windows Media Audio) P P MP3 (MPEG-1 Audio Layer-3) P P WAV P MPEG-4 AAC P z 2 FLAC (Free Lossless Audio Codec) P JPEG P A server or server software compatible with distribution in the corresponding formats is req...
Page 43 - Listening to internet radio; Playing the last played Internet radio station; INTERNET RADIO; Recently played internet radio stations
40 Playing a network audio Listening to internet radio 1 Prepare for playback. q Check the network environment, then turn on this unit’s power ( v page 19 “Connecting to a home network (LAN)”). w If settings are required, make the “Network Connecting” ( v page 111 ). 2 Press NET/USB to switch the in...
Page 44 - OK; PRESET
41 Playing a network audio n Searching stations by keyword (Alphabetic strings) 1 Press ui to select “Search by Keyword”, then press ENTER or p . Station a n 0 _ b o 1 / c P 2 : d q 3 ˜ e r 4 ? f s 5 [ g t 6 \ h u 7 ] i v 8 ˆ j w 9 ` k x . { l y @ | m z - } Search by Keyword a/A SPACE INSERT DELETE ...
Page 46 - Playing files stored on a computer; Playing files that have been preset or registered; Media server operation
43 Playing a network audio Playing files stored on a computer Use this procedure to play music files, image files or playlists. 1 Prepare for playback. q Check the network environment, then turn on this unit’s power ( v page 19 “Connecting to a home network (LAN)”). w If settings are required, make ...
Page 47 - Viewing photographs on the Flickr site; Viewing photographs shared by particular users; Viewing all photographs on Flickr
44 Playing a network audio Viewing photographs on the Flickr site You can view photographs shared by particular users, or all of the photographs shared on Flickr. n Viewing photographs shared by particular users 1 Prepare for playback. q Check the network environment, then turn on this unit’s power ...
Page 48 - Flickr operation
45 n Flickr operation Operation buttons Function INTERNET RADIO V Last played internet radio station PRESET 1 – 3 Preset channel (1 – 3) selection CH +, – Preset channel (A1 – G8) selection MENU Amp menu uio p Cursor operation / Auto search (cue, ui ) ENTER (Press and release) Enter ENTER (Press and...
Page 49 - Listening to Napster; Searching from Napster menu; Registering tracks in my Napster library
46 Playing a network audio Listening to Napster 1 Prepare for playback. q Check the network environment, then turn on this unit’s power ( v page 19 “Connecting to a home network (LAN)”). w If settings are required, make the “Network Connecting” ( v page 111 ). 2 Press SOURCE SELECT to display the “S...
Page 50 - Napster operation
47 n Napster operation Operation buttons Function INTERNET RADIO V Last played internet radio station PRESET 1 – 3 Preset channel (1 – 3) selection CH +, – Preset channel (A1 – G8) selection MENU Amp menu uio p Cursor operation / Auto search (cue, ui ) ENTER (Press and release) Enter ENTER (Press an...
Page 51 - Listening to Pandora
48 Playing a network audio Listening to Pandora 1 Prepare for playback. q Check the network environment, then turn on this unit’s power ( v page 19 “Connecting to a home network (LAN)”). w If settings are required, make the “Network Connecting” ( v page 111 ). 2 Press SOURCE SELECT to display the “S...
Page 52 - Creating an original radio station; Listening to a created radio station; Listening to created radio stations at random
49 Playing a network audio n Creating an original radio station You can create up to 100 original radio stations. 1 Use ui to select “New Station”, then press ENTER or p . My Station New Station Quick Mix D&M1 Radio [1/3] RETURN Sign out Exit 2 Input a “Track or Artist”, then press OK . New Stat...
Page 53 - Arranging tracks within radio stations; While the Pandora top menu is; When the popup menu appears, press; Pandora operation
50 Playing a network audio n Arranging tracks within radio stations You can sort tracks by operating the Pandora menu screen while a track is playing. Press p while a track is playing. The Pandora menu screen is displayed. Menu I like this track I don’t like this track Bookmark this trackI’m tired o...
Page 54 - Listening to Rhapsody
51 Playing a network audio Listening to Rhapsody 1 Prepare for playback. q Check the network environment, then turn on this unit’s power ( v page 19 “Connecting to a home network (LAN)”). w If settings are required, make the “Network Connecting” ( v page 111 ). 2 Press SOURCE SELECT to display the “...
Page 55 - Track menu; Search from the similar music; Registering tracks in my library; Rating function; Rhapsody operation
52 Playing a network audio n Track menu Press p during playback to display the track menu. Rhapsody Jump to artist Jump to album Similar artists Similar albumsAdd to my libraryRating [1/6] CH +/- Preset q w e q Search from the similar music Use ui to select the search item, then press ENTER or p . w...
Page 56 - Playing a USB memory device; Album art function
53 Playing a USB memory device Playing back music or still picture (JPEG) files recorded on a USB memory device. Important information n USB memory devices A USB memory device can be connected to the USB port of this unit to play music and still picture (JPEG) files stored on the USB memory device.A...
Page 57 - USB operation
54 Playing files stored on USB memory devices 1 Connect the USB memory device to the USB port ( v page 15 “Connecting an iPod or USB memory device to the USB port”). 2 Press NET/USB to switch the input source to “NET/USB”. DENON:[AVR-3312CI] Favorites Internet Radio FlickrNapster Pandora Media Serve...
Page 58 - Selecting a listening mode; Play the selected device; MOVIE; DIRECT; to select a listening mode.; Listening mode
55 Selecting a listening mode (SURROUND MODE) This unit can play input audio signals in multi-channel surround mode or in stereo mode.Select a listening mode suitable for the playback contents (cinema, music, etc.) or according to your liking. Selecting a listening mode 1 Play the selected device ( ...
Page 60 - Views on the TV screen or display
57 Selecting a listening mode Operation button Input signal Listening mode All DIRECTPURE DIRECT z 1 2-channel also includes analog input. z 2 This mode plays back 2-channel source in 5.1 or 7.1-channel playback. It cannot be selected when headphones are used, or when only front speakers are used. z...
Page 61 - Description of listening mode types
58 Selecting a listening mode n Description of listening mode types Dolby listening mode Listening mode type Description DOLBY PL g x z 1 This mode can be selected when a Dolby Pro Logic g x decoder is used to play back 2-channel source in 6.1/7.1-channel surround sound including the surround back c...
Page 62 - DENON original listening mode
59 Selecting a listening mode DENON original listening mode Listening mode type Description MULTI CH STEREO This mode is for enjoying stereo sound from all speakers.The same sound as that from the front speakers (L/R) is played back at the same level from the surround speakers (L/R) and surround bac...
Page 63 - How to make detailed settings; dv
Advanced version 60 F Speaker installation/connection (Advanced connection) v page 61 F Playback (Advanced operation) v page 71 F Playback in ZONE2/ZONE3 (Separate room) v page 82 F How to make detailed settings v page 85 F Operating the connected devices by remote control unit v page 121 Advanced v...
Page 64 - Procedure for speaker settings; Install; wide speaker) installed; Speaker abbreviations
61 Here we describe the installation, connection and setup methods for speakers other than 5.1-channel speakers. For the installation, connection and setup methods for 5.1-channel speakers, see C page 4 “SETUP WIZARD” . Use Audyssey® Auto Setup function of this unit to automatically detect the numbe...
Page 66 - Connect; connection
63 Connect • For the method of connecting 5.1-channel speakers, see C page 6 “Connecting the speakers” . • For the method of connecting the TV, see C page 3 “Connect this unit to the television using an HDMI cable (sold separately)” . 7.1-channel (Surround back / Front height / Front wide speaker) c...
Page 68 - For connecting two subwoofers
65 2.1-channel connection FL FR SW NOTE • For speaker cable connections, see C page 6 “Connecting the speakers” . • For speaker impedance , see page 63 . n For connecting two subwoofers Two subwoofers can be connected to this unit.The same signal is output from each subwoofer terminal. Front A/B con...
Page 70 - Multi channel playback
67 Connect FL FL’ FR FR’ C SW SL SR Multi channel playback (Surround mode) 2-channel playback (Direct/Stereo mode) Switching 5.1-channel + 2-channel connection You can connect the other front speakers for 2-channel playback using the DIRECT mode or STEREO mode.The speakers used exclusively for 5.1-c...
Page 71 - Set up speakers; Set up “Amp Assign”
68 1 Set up the remote control unit n Set up the zone mode Press ZONE SELECT to switch the zone mode to J (MAIN ZONE). The J indicator lights. Press ZONE SELECT n Set up the operation mode Press AMP to set the remote control unit to AMP- operation mode. Press AMP 2 Connect the setup microphone. AUDY...
Page 72 - Set up “Channel Select”
69 Set up speakers 6 Set up “Channel Select” Use ui to select “Channel Select”, and then press ENTER . AUDYSSEY AUTO SETUP 1 2 3 4 5 6 Amp Assign RETURN Auto Setup Start Channel Select STEP1 Preparation Connect the speakers and place them according to the recommendations in the manual, Set the follo...
Page 74 - Convenient functions; HDMI control function; Operations possible by HDMI control; Setting procedure
71 n HDMI control function ( v page 71 ) n Sleep timer function ( v page 72 ) n Adjusting the volume of the speakers ( v page 73 ) n Quick select function ( v page 74 ) n REC OUT mode ( v page 75 ) n AirPlay ( v page 76 ) n Party mode function ( v page 77 ) n Zone Management function ( v page 78 ) n...
Page 75 - Sleep timer function; and display the time you; SLEEP; To confirm the countdown time before putting the; SLEEP; To cancel the sleep timer; SLEEP
72 Convenient functions NOTE • When “HDMI Control” – “Control” is set to “ON”, it consumes more standby power. • The HDMI control function controls operations of a TV that is compatible with the HDMI control function. Make sure that the TV and HDMI are connected when you perform HDMI control. • Some...
Page 76 - Adjusting the volume of the speakers; Adjusting the volume of the different speakers; Adjusting the volume of groups of speakers
73 Convenient functions Adjusting the volume of the speakers You can adjust the channel level either according to the playback sources or to suit your taste, as described below. n Adjusting the volume of the different speakers 1 Press ZONE SELECT to switch the zone mode to J (MAIN ZONE). The J indic...
Page 77 - Quick select function; Saving the settings; Recalling the settings; QUICK SELECT; Naming quick select settings; QUICK SELECT
74 Convenient functions Quick select function All of the settings in step 1 can be memorized together. By memorizing frequently used settings, you can quickly access and enjoy a playback environment that is consistently the same. n Saving the settings 1 Set the items below to the settings you want t...
Page 78 - REC OUT mode
75 Convenient functions REC OUT mode When using the audio/video recording connectors (DVR outputs), you can record the audio or video from a different program source while listening to the currently played track. 1 Press ZONE2 / REC SELECT until “RECOUT SOURCE” is displayed. The indicator illuminate...
Page 79 - AirPlay; Multiple Speakers; Streaming music stored in iPhone, iPod touch,; Remote operations
76 Convenient functions AirPlay Enjoy music from your iTunes library with DENON quality sound anywhere in your home.Use the Apple Remote app z for iPhone, iPod touch and iPad to control iTunes from any room in your home. z Available as a free download from the App Store. n Setting procedure 1 Instal...
Page 80 - Party mode function; Starting the party mode as the organizer; Participating in the party mode as an attendee; Canceling the party mode
77 Party mode function The same network audio (Internet radio, Media server or iPod DIRECT) can be played on multiple DENON products equipped with the Party Mode function and connected in a network.The party mode consists of one organizer and up to four attendees.When one unit starts the party mode ...
Page 81 - Zone Management function; MENU
78 Zone Management function The status of devices connected to the same network can be displayed. Additionally, network menu browsers and volume controls can be performed via the network for the connected devices. This is useful when playing back network services of a device located in a separate ro...
Page 82 - Operating a media controller to play music and still pictures; Playing content on a computer (Media server); Playing contents on a media controller
79 Operating a media controller to play music and still pictures • Perform this procedure using a media controller conforming to the DLNA (Digital Living Network Alliance) standard. • This function allows you to play content located on a computer (media server) or connected on a network by operating...
Page 83 - Web control function; Switch the “Network Standby” setting to “ON”; Enter the IP address of this unit in browser’s address; When the top menu is displayed, click on the menu; y u
80 Web control function You can operate this unit using a browser. 1 Switch the “Network Standby” setting to “ON” ( v page 113 ). 2 Check the IP address of this unit with “Network Info.” ( v page 114 ). NETWORK INFO. DHCPIP AddressMAC Address OFF 0005cd000000 Friendly Name DENON:[AVR-3312CI] 192.168...
Page 84 - Various memory functions; Personal memory plus function
81 Convenient functions G Example 2 H Setup menu screen SETUP MENU SOURCE SELECT Source Input Assign Video Video Select BD SOURCE Auto Video ModeVideo Converti/p ScalerResolution (analog)Resolution (HDMI)Progressive ModeAspect Auto Game ON OFF Movie Analog Analog & HDMI OFF Auto 480p/576p 1080i ...
Page 85 - Audio output; Zone playback by speaker output; Connecting and setting the speakers
82 Playback in ZONE2/ZONE3 (Separate room) • You can operate this unit so as to enjoy audio in a room (ZONE2, ZONE3) other than the MAIN ZONE (room where the unit is located). • You can simultaneously play back the same source in both the MAIN ZONE, ZONE2 and ZONE3. You can also play back separate s...
Page 86 - Playback; SELECT; Adjusting the volume; MASTER VOLUME; Video output; Video Connection
83 Playback 1 Press ZONE SELECT to switch the zone mode to K (ZONE2) or L (ZONE3). Input source select buttons 2 Press AMP to set the remote control unit to AMP-operation mode. 3 Press ZONE/DEVICE Z to turn on the ZONE2 or ZONE3 power. The or indicator on the display lights. • Also press input sourc...
Page 88 - Menu map; Items that only need to be set
85 Menu map For menu operation, connect a TV to this unit and display the menu on the TV screen. For menu operations, see the following page. How to make detailed settings Setting items Detailed items Description Page SOURCE SELECT Displayed items of the “SOURCE SELECT” menu differs, depending on th...
Page 89 - Examples of menu screen displays; Example 1; Icon; List
86 Examples of menu screen displays Typical examples are described below. G Example 1 H Menu selection screen (Top menu) SPEAKER SETUP Auto Setup Amp Assign Speaker Config. Bass Setting Distance Channel Level Make detailed speaker settings q List of GUI menu setup icons w Currently selected setup ic...
Page 90 - Examples of menu and front display; Menu display; Top menu display; Display when changing settings; Display when resetting
87 Examples of menu and front display Below we describe typical examples of displays on the TV screen and on the set’s display window. Menu display Front display Description Top menu display AUDIO/VIDEO ADJUST Audio Adjust Picture Adjust Adjust various audio and video parameters w w A / V A d j u s ...
Page 91 - Inputting characters; Method for inputting characters; Keyboard screen; Display of a keyboard input screen; Using the keyboard screen; SHIFT
88 Inputting characters You can change the names as desired using the “Preset Name” ( v page 96 ), “Rename” ( v page 94 ), “Rhapsody Account” ( v page 114 ), “Napster Account” ( v page 114 ), “Zone Rename” ( v page 117 ), “Quick Select Name” ( v page 117 ) and character input for the network f...
Page 92 - 0 Key input screen; Display of a 10 Key input screen; Using the number buttons; Using the cursor buttons
89 Inputting characters 10 Key input screen n Display of a 10 Key input screen PHONO CD B D DVD TV SAT/CBL DVR RENAME [1/2] RETURN Cancel Enter Input CH+ Insert CH- Delete SEARCH 0-9 Keyboard Default PHONO CD BD DVD TV SAT/CBL DVR q w q Character input section (Maximum 8 characters) w Guide for oper...
Page 93 - Menu operation; About the display of input sources; Items that can be set with the “SOURCE SELECT” procedure
90 SOURCE SELECT Perform settings related to input source playback.• You do not have to change the settings to use the unit. Make settings when needed. Menu operation 1 Press ZONE SELECT to switch the zone mode to J (MAIN ZONE). The J indicator lights. 2 Press AMP to set the remote control unit to A...
Page 94 - Examples of “Input Assign” menu screen displays; Input assignments menu operations
91 SOURCE SELECT Setting items Setting details HDMI Set this to change the HDMI input connectors assigned to the input sources. BD DVD TV SAT/CBL DVR GAME1 GAME2 V.AUX DOCK HDMI 1 / HDMI 2 / HDMI 3 / HDMI 4 / HDMI 5 / HDMI 6 / HDMI 7 None : Do not assign an HDMI input connector to the selected input...
Page 95 - Video
92 Setting items Setting details DIGITAL Set this to change the digital input connectors assigned to the input sources. BD DVD TV SAT/CBL DVR GAME1 GAME2 V.AUX DOCK CD COAX (coaxial) 1, 2 / OPT (optical) 1, 2 None : Do not assign a digital input connector to the selected input source. • At time of p...
Page 97 - Input Mode; Rename; Source Level
94 Input Mode (Audio) Default settings are underlined. The input modes available for selection may vary depending on the input source. Setting items Setting details Input Mode Set the audio input modes for the different input sources.It is normally recommended to set the audio input mode to “Auto”. ...
Page 98 - Input source : “DOCK”; Auto Preset
95 Still Picture Default settings are underlined. Make settings for playing back still picture images. Setting items Setting details Slide Show Make slide show settings. NET/USB ON : Display still picture images in a slide show. OFF : The slide show is not played back. Interval Set the time for disp...
Page 99 - Preset Skip; Preset Name
96 SOURCE SELECT Preset Skip Default settings are underlined. Set preset channel to be skipped when selecting. Setting items Setting details A – G Set the preset channels you do not want to display. You can set by preset memory block (A to G) or by preset channel (1 to 8). HD Radio All : Skip all ch...
Page 100 - Items that can be set with the “AUDIO/VIDEO ADJUST” procedure
97 AUDIO/VIDEO ADJUST Sound field effects for surround sound and video quality can be adjusted. Menu operation 1 Press ZONE SELECT to switch the zone mode to J (MAIN ZONE). The J indicator lights. 2 Press AMP to set the remote control unit to AMP-operation mode. 3 Press MENU . The menu is displayed ...
Page 101 - Surround Parameters
98 Audio Adjust n Surround Parameters Default settings are underlined. The items (parameters) that can be adjusted depend on the signal being input and the currently set surround mode. For details on the adjustable parameters, see “Surround modes and surround parameters” ( v page 134 ). NOTE • Some ...
Page 102 - For 2-channel sources
99 AUDIO/VIDEO ADJUST Setting items Setting details Height Gain Control the front height channel volume. Low : Reduce the front height channel volume. Middle : Front height channel sound is output with standard sound volume. High : Increase the front height channel volume. NOTE “Height Gain” is disp...
Page 103 - Tone
100 AUDIO/VIDEO ADJUST Setting items Setting details Speaker Make settings for the speakers outputting sound when playing back in DENON original surround mode. Surround Back : Sound is output from the surround back speakers. Height : Sound is output from the front height speakers. Wide : Sound is ou...
Page 104 - Audyssey Settings
101 AUDIO/VIDEO ADJUST n Audyssey Settings Default settings are underlined. Set Audyssey MultEQ® XT, Audyssey Dynamic EQ® and Audyssey Dynamic Volume®. These can be selected after Audyssey® Auto Setup has been performed. For additional information on Audyssey technology, please see page 142 . NOTE •...
Page 105 - Manual EQ
102 AUDIO/VIDEO ADJUST n A-DSX Soundstage Default settings are underlined. Adjust Audyssey DSX™ setting and sound stage parameters. Setting items Setting details Audyssey DSX™ Provides more immersive surround sound by adding the new channels. ON–Height– : Turn on A-DSX processing for height expansio...
Page 107 - SYSTEM SETUP; Items that can be set with the “SYSTEM SETUP” procedure
104 SYSTEM SETUP Set when changing Audyssey® Auto Setup settings, or when changing the audio, video, display or other settings. • If you change the speaker settings after performing Audyssey ® Auto Setup, it will not be possible to set Audyssey MultEQ® XT, Audyssey Dynamic EQ ® and Audyssey Dynamic ...
Page 108 - Speaker Setup
105 Speaker Setup Default settings are underlined. Perform when setting the speakers manually or when changing settings made in Audyssey® Auto Setup.• If you change the speaker settings after performing Audyssey® Auto Setup, it will not be possible to select Audyssey MultEQ® XT, Audyssey Dynamic EQ®...
Page 111 - HDMI Setup
108 SYSTEM SETUP Setting items Setting details Crossover Freq. Set the maximum frequency of the bass signal output from each channel to the subwoofer. Set the Crossover Frequency to suit the bass reproduction capability of the speaker being used. 40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 1...
Page 113 - Audio Setup
110 SYSTEM SETUP Audio Setup Default settings are underlined. Make settings for audio playback. Setting items Setting details 2ch Direct/Stereo Select the method for setting the speakers used in the 2-channel direct and stereo playback modes. Setting : Select the method for setting the speakers used...
Page 114 - Network Setup
111 Network Setup Default settings are underlined. Make network settings. Setting items Setting details Network Connecting Make settings for wired LAN. Only set “Network Connecting” when connecting to a network without a DHCP function. Detail Exit NETWORK CONNECTING DHCPIP Address OFF192.168.0.1 Ent...
Page 118 - Zone Setup
115 SYSTEM SETUP Zone Setup Default settings are underlined. Set the audio to play back with multi-zone (ZONE2, ZONE3).• “ZONE2” is displayed when “ZONE2” is selected with “Amp Assign” ( v page 105 ). • “ZONE3” is displayed when “ZONE3” is selected with “Amp Assign” ( v page 105 ). Setting items Set...
Page 119 - Option Setup; PRESET 1
116 SYSTEM SETUP Option Setup Default settings are underlined. Make various other settings. Setting items Setting details Volume Control Set the MAIN ZONE (room where the unit is located) volume setting. Volume Display : Set how volume is displayed. • Relative : Display ---dB (Min), in the range –80...
Page 120 - When setting for input source; DIMMER
117 SYSTEM SETUP Setting items Setting details GUI (Continued) NET/USB : Set the NET/USB screen display time when the input source is “NET/USB”.• Always : Show display continuously. • 30s : Show display for 30 seconds after operation. • 10s : Show display for 10 seconds after operation. • OFF : Turn...
Page 122 - Language
119 SYSTEM SETUP Language Default settings are underlined. Set the language for display on the menu screen. Setting details English / Español “Language” can also be set by the following procedure. However, the menu screen is not displayed. 1. Press and hold the main unit’s PRESET 1 and PRESET 3 for ...
Page 123 - INFORMATION
120 INFORMATION Show information about receiver settings, input signals, etc. Items Setting details Status Show information about current settings. n MAIN ZONE This item shows information about settings for MAIN ZONE.The information displayed differs according to the input source. Select Source / Na...
Page 124 - Operating the connected devices by remote control unit; Operating AV devices; to select a; Operate this unit or the device whose input source is
121 Operating the connected devices by remote control unit Registering the supplied preset codes in the remote control unit enables you to operate devices made by other manufacturers. Operating AV devices 1 Press ZONE SELECT to select a zone for operation. The zone mode indicator corresponding to th...
Page 125 - Registering preset codes; Buttons used for operating the devices; Default settings for preset codes
122 Registering preset codes When preset codes are registered in the included remote control unit, it can then be used to operate any devices you have, such as DVD players or TVs made by different manufacturers.In this menu, you can search and display the preset codes that can be preset in the inclu...
Page 127 - Either of the screens below is displayed.; Operating devices; Press the input source select; DVD player operation; CD player / CD recorder operation
124 Registering preset codes 14 Either of the screens below is displayed. q 1. Press [INPUT SOURCE].2. Press and hold [DEVICE ON ( l )] for 3 seconds.3. Input code with [0-9].4. Press any key to check device. (e.g. [DEVICE ON ( l )]) REMOTE SETUP GUIDE Device Brand Code [1/3] : DVD : DENON : 30490 P...
Page 128 - TV operation; IP TV operation
125 n DVD recorder (DVR) / Personal video recorder (PVR) / video cassette recorder (VCR) operation Operation buttons Function CH +, – Switch channels (up/down) MENU Menu uio p Cursor operation ENTER Enter SETUP Setup RETURN B Return 6 7 Manual search (fast-reverse/fast-forward) 1 Playback 8 9 Auto s...
Page 129 - Resetting the remote control unit
126 Specifying the zone used with the main remote control unit When the ZONE SELECT button is pressed, only the set zone can be operated with the remote control unit. 1 Press and hold ZONE/DEVICE Z for at least 3 seconds. The zone mode indicator flashes twice. 2 Press ZONE SELECT . The zone mode ind...
Page 130 - Part names and functions; Here, we list various information related to this unit.; mation
Information 127 F Part names and functions v page 128 F Other information v page 133 F Troubleshooting v page 145 F Specifications v page 150 F Index v page 151 Information Here, we list various information related to this unit. Please refer to this information as needed. Basic v ersion A dv anced v...
Page 131 - Front panel
128 Front panel For buttons not explained here, see the page indicated in parentheses ( ). W1 Q6 Q7 Q8 Q9 W0 W2 W3 Q5 Q3 Q4 Q2 Q1 o Q0 i u t r y e w q q Power operation button (ON/STANDBY) ································································· ( C 5 ) Turns power to this unit on and off (...
Page 132 - Display; r t
129 Display u i o Q5 Q7 Q9 W0 Q0 Q1 Q3 Q4 Q2 Q6 Q8 w q e r t y q Input signal indicators w Input signal channel indicators These light when digital signals are input.When playing HD Audio sources, the indicator lights when a signal from an extension channel (a channel other than the front, center, s...
Page 133 - Rear panel
130 Rear panel See the page indicated in parentheses ( ). o q w e t r y u Q0 i Q5 Q4 Q2 Q3 Q1 q RS-232C connector ·································································· ( 20 ) w HD Radio antenna terminals ·················································· ( 16 ) e Analog audio connectors...
Page 134 - Remote control unit
131 Remote control unit For buttons not explained here, see the page indicated in parentheses ( ). q w e r ty ui oQ0 Q1 Q2 Q3 Q4 Q5 Q6 Q8 Q7 W9 W8 W7 W6 W2 W1 W0 Q9 W3 W4W5 q ZONE SELECT button ························ ( 83 , 121 ) w Zone mode indicators ······························ ( 121 ) e Inpu...
Page 135 - Inserting the batteries; Operating range of the remote control unit
132 Remote control unit Inserting the batteries q Slide the rear lid in the direction of the arrow and remove it. w Load the two batteries properly as indicated by the marks in the battery compartment. R6/AA e Put the rear cover back on. NOTE • Insert the specified batteries in the remote control un...
Page 136 - Other information; Trademark information
133 Other information n Trademark information ( v page 133 ) n Surround ( v page 134 ) n Relationship between video signals and monitor output ( v page 140 ) n Explanation of terms ( v page 142 ) Trademark information This product uses the following technologies: Manufactured under license from Dolb...
Page 137 - Surround; Surround modes and surround parameters; Symbols in the table
134 Surround This unit is equipped with a digital signal processing circuit that lets you play program sources in the surround mode to achieve the same sense of presence as in a movie theater. Surround modes and surround parameters This table shows the speakers that can be used in each surround mode...
Page 140 - Types of input signals, and corresponding surround modes
137 Surround n Types of input signals, and corresponding surround modes This table shows the input signal that can be played in each surround mode. Check the audio signal of the input source then select the surround mode. Symbols in the table F This indicates the default surround mode. D This indica...
Page 143 - Relationship between video signals and monitor output
140 Relationship between video signals and monitor output MAIN ZONE MONITOR OUT Video Convert Input connector Output connector Menu displayed HDMI COMPONENT S-VIDEO VIDEO HDMI COMPONENT VIDEO HDMI COMPONENT VIDEO ON/OFF A A A A A A A Only the menu is displayed ON A A A S S <VIDEO> S <VIDEO&...
Page 144 - Video signal resolution conversion table
141 ZONE2 MONITOR OUT The main zone video conversion function is compatible with the following formats: NTSC, PAL, SECAM, NTSC4.43, PAL-N, PAL-M and PAL-60. NOTE • The status display screen cannot be displayed at a computer’s resolution (e.g. VGA) or while certain 3D video contents is being played. ...
Page 145 - Explanation of terms
142 Explanation of terms A Adobe RGB color, Adobe YCC601 color Like “x.v.Color”, each of these color spaces defines a palette of available colors that is larger than the traditional RGB color model. AirPlay AirPlay sends (plays) contents recorded in iTunes or on an iPhone/iPod touch/iPad to a compat...
Page 148 - Troubleshooting
145 Troubleshooting If a problem should arise, first check the following:1. Are the connections correct?2. Is the set being operated as described in the owner’s manual?3. Are the other devices operating properly? If this unit does not operate properly, check the items listed in the table below. Shou...
Page 152 - Resetting the microprocessor; Turn off the power using; PRESET CHANNEL 2; PRESET CHANNEL 3
149 Resetting the microprocessor Perform this procedure if the display is abnormal or if operations cannot be performed.When the microprocessor is reset, all the settings are reset to their default values. ON/STANDBY PRESET CHANNEL 3 PRESET CHANNEL 2 1 Turn off the power using ON/STANDBY . 2 Press O...
Page 153 - Specifications; Audio section; Video section
150 Specifications n Audio section • Power amplifierRated output: Front: 125 W + 125 W (8 Ω, 20 Hz – 20 kHz with 0.05 % T.H.D.) 165 W + 165 W (6 Ω, 1 kHz with 0.7 % T.H.D.) Center: 125 W (8 Ω, 20 Hz – 20 kHz with 0.05 % T.H.D.) 165 W (6 Ω, 1 kHz with 0.7 % T.H.D.) Surround: 125 W + 125 W (8 Ω, 20 Hz...
Page 154 - Numerics; Index
151 v Numerics 2.1-channel ························································· 652ch Direct/Stereo ············································· 1103D ········································································· 76.1-channel ··················································· 62, ...
Page 156 - Dimensions
153 Dimensions Unit : in. (mm) 13 21/64 (338.5) 15 3/64 (382.0) 5/8 (16.0) 5 15/16 (151.0) 6 37/64 (167.0) 17 1/8 (435.0) 27/32 (21.5) 55/64 (22.0) Weight : 26 lbs (11.8 kg) Basic v ersion A dv anced v ersion Infor mation Infor mation
Denon AVR-882
User Manual
Denon AVR-682
User Manual
Denon DRR-M30
User Manual
Denon DVD-756
User Manual
Denon DHT-1000DV
User Manual
Denon DVD-556
User Manual
Denon AVR-786
User Manual
Denon AVR-683
User Manual
Denon AVR-3802
User Manual
Denon AVR-2805
User Manual