Denon DHT S517 - Manuals

Accessories Check that the following parts are supplied with the product. Quick Start Guide Safety Instructions Wall mount template Remote control unit (RC-1245 / Built-in battery) Wall mount spacers Optical digital cable HDMI cable (4K) Power cords Cautions on Using Batteries Contents Connections P...

Before using the remote control unit The remote control unit has a built-in lithium battery.Pull out the insulation sheet before use. o Replacing the battery 1. Lightly slide the catch of the battery case on the back of the remote control in the rightward direction. 2. While pushing the catch lightl...

Part names and functions Sound bar o Top panel e q r w A Power operation button ( c ) Turns the sound bar power on/off (standby). ( v p. 25) Links to sound bar power and turns the subwoofer power on/off (standby). B Input source button ( d ) This selects the input source. ( v p. 25) Switches the inp...

o Front panel q w A Status LEDThe status, such as for the power, input source, audio format, or sound mode is displayed. ( v p. 10) B Remote control sensorThis receives signals from the remote control unit. ( v p. 7) Contents Connections Playback Settings Tips Appendix 9

o Status LED TV (HDMI eARC/ARC) TV (OPTICAL) AUX Input source Off (Standby) On Power Bluetooth Dolby Atmos Audio format [Ex.] Input source: TV (HDMI eARC/ARC) Dolby (other than Atmos) Unsupported audio format PCM (or No Signal) Pure mode Sound mode [Ex.] Input source: TV (HDMI eARC/ARC) Blinkonce HD...

o Rear panel q q t r y u e w A Wall hook holeUsed to mount the sound bar on a wall. ( v p. 16) B HDMI IN connectorUsed to connect to the HDMI equipment with an HDMI cable. ( v p. 23) C Analog audio input connector (AUX IN)Use a commercially available 3.5 mm stereo audio cable to connect a TV with an...

Subwoofer o Rear panel A Status LEDDisplays subwoofer status. LED indication Status When subwoofer power is standby When the sound bar and subwoofer are wirelessly connected 0 The sound bar and subwoofer are wirelessly connected as the factory default. If no audio is output from the subwoofer, wirel...

Remote control unit w q e t r y u A Power button ( c ) Turns the sound bar power on/off (standby). ( v p. 25) Links to sound bar power and turns the subwoofer power on/off (standby). B Input source buttons (TV, HDMI, OPT, AUX, g ) This selects the input source. ( v p. 25) C Volume buttons (VOL +, –)...

Positioning Positioning the sound bar in front of a TV Position the sound bar in front of your TV, etc., on a flat surface. NOTE 0 When positioning the sound bar in front of your TV, make sure the sound bar does not obstruct the TV’s remote control light sensor, etc. Contents Connections Playback Se...

Hanging the sound bar on a wall The sound bar can be mounted on a wall using the two keyholes provided on the back of the bar for this purpose. When hanging bar on a wall, position it in a flat, vertical position.To ensure safety, it is best to employ a contractor to mount the sound bar on the wall....

Positioning the subwoofer Position the subwoofer in a flat location near the sound bar. Contents Connections Playback Settings Tips Appendix 18

Connecting a TV How to connect a TV depends on the connectors and functions equipped on the TV. 0 Enable the TV’s HDMI control function when using an HDMI cable to connect this unit to your TV. (See the TV owner’s manual for details.) 0 Turn off the TV’s speaker or minimize the volume when using thi...

TV equipped with an HDMI connector and incompatible with the eARC or ARC / TV equipped with an optical digital connector Use the included HDMI and optical cables to connect this unit to your TV. OPTICAL OUTPUT HDMI INPUT TV Soundbar (Rear panel) Optical digital cable (included) HDMI cable (included)...

TV equipped with an HDMI connector and incompatible with the eARC or ARC / TV equipped with an analog connector Use the included HDMI cable and a commercially available 3.5 mm stereo audio cable to connect this unit to your TV. AUX AUDIO OUT HDMI INPUT TV Soundbar (Rear panel) HDMI cable (included) ...

Connecting a playback device Connecting an HDMI device Use a commercially available HDMI cable to connect a Blu-ray disc player, game device or similar device to this unit. HDMI OUTPUT HDMI device HDMI cable (not included) Soundbar (Rear panel) 0 When connecting this unit to a device that is compati...

Connecting the power cords After completing all the connections, insert the power plug into the power outlet. Subwoofer (Rear panel) Soundbar (Rear panel) Power cord (included) Power cord (included) Connect to household power outlet (AC 230 V, 50/60 Hz) Contents Connections Playback Settings Tips Ap...

Playing TV, movies and music X Input source buttons VOL +, – BASS +, – 1 Turn on the power of the TV and connected devices. 2 Press c to turn on power to the unit. 3 Press the input source button. TV: Switches the input source to TV (HDMI eARC/ ARC). HDMI: Switches the input source to HDMI IN. OPT: ...

Adjusting the volume 1 Use VOL + or VOL – to adjust the volume. When the button is pressed, the status LED lights up to match the current volume. 0 Each time a volume button is pressed, the status LEDs blink and the number of LEDs that are blinking increases or decreases according to the volume that...

Playing music on a Bluetooth device Music files stored on Bluetooth devices such as smartphones, digital music players, etc. can be enjoyed on this unit by pairing and connecting this unit with the Bluetooth device. X Pairing a Bluetooth device for the first time Pair a Bluetooth device with this un...

Pairing with other Bluetooth devices 1 Press c to turn on power to the unit. 2 Press g to switch the input source to “Bluetooth”. 3 Activate the Bluetooth settings on your Bluetooth device. 4 Press and hold g for 3 seconds. This unit enters pairing mode, and the status LED repeatedly blinks in blue....

Settings Perform the below operations and settings as needed. Sound mode buttons VOL +, – BASS +, – Selecting a sound mode 1 Press the sound mode button to select a sound mode. When the button is pressed, the rightmost status LED blinks and the sound mode changes. ( v p. 10) MOVIE: Enjoy movie theat...

Automatically setting to standby (Auto standby function) Switch the auto standby function on or off.When the auto standby function is turned on, the power supply for this unit automatically switches to standby if no operations have been performed for approx. 20 minutes or more and audio is not being...

0 When the power button is pressed while the deep standby function is on, all status LEDs blink in white three times and this unit enter deep standby mode. 0 When the power button is pressed while the deep standby function is off, all status LEDs blink in green three times and this unit enter normal...

Automatically turning on the power according to the playback of the playback device (Auto on control function) If you turn on the auto on control function and playback is started by the playback device while this unit is on standby, the power of this unit is automatically turned on and playback is s...

Operating this unit using the remote control of a TV There are three ways to operate this unit using the remote control of a TV. 0 HDMI control function Connect this unit to a TV that supports the HDMI control function with an HDMI cable and enable the HDMI control setting on the TV to perform basic...

Power does not turn on / Power is turned off Power does not turn on. 0 Check whether the power plug is correctly inserted into the power outlet. ( v p. 24) 0 If the power of this unit cannot be turned on with the remote control for the TV, press the c button to turn on the power of this unit. ( v p....

Operations cannot be performed through the remote control unit Operations cannot be performed through the remote control unit. 0 Battery is worn out. Replace with new battery. ( v p. 6) 0 Operate the remote control unit within a distance of about 7 m from this unit and at an angle of within 30°. ( v...

No sound comes out No sound comes out. 0 Check the connections for all devices. ( v p. 19) 0 Insert connection cables all the way in. 0 Check that input connectors and output connectors are not reversely connected. 0 Check cables for damage. 0 Check that a proper input source is selected. ( v p. 25)...

Bluetooth playback does not work Cannot pair with a Bluetooth device. 0 It may be that Bluetooth is not enabled on the Bluetooth device. See the owner’s manual of the Bluetooth device to enable the Bluetooth function. 0 This unit may be paired with another Bluetooth device. Select this unit from the...

The HDMI control function does not work The HDMI control function does not work. 0 You cannot operate devices that are not compatible with the HDMI control function. In addition, depending on the connected device or the settings, the HDMI control function may not work. In this case, operate the exte...

Resetting factory settings Perform this procedure if the display is abnormal or if operations cannot be performed.Various settings are reset to the factory default values. Make settings again. 1 Press c to turn on power to the unit. 2 Press and hold the main unit's c , d and + at the same time for a...

Trademark information The Bluetooth ® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by D&M Holdings Inc. is under license. Other trademarks and trade names are those of their respective owners. Dolby, Dolby Vision, Dolby Atmos, and the d...

Specifications Sound bar o General Operating temperature: 5 °C - 35 °C Power supply: AC 100 - 240 V, 50/60 Hz Power consumption: 40 W Power consumption in standby mode: 1.7 W Power consumption in deep standby mode: 0.4 W Max Analog Input: 2 Vrms Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz Supported...

o Wireless section Used frequency range: 2.4 GHz (Wireless subwoofer) o Bluetooth section Communications system: Bluetooth Version 5.0 Transmission power: Power Class 2 Maximum communication range: Approx. 10 m in line of sight z Used frequency range: 2.4 GHz band Modulation scheme: FHSS (Frequency-...

4 ENGLISH DEUTSCH FRANÇAIS ITALIANO ESP AÑOL NEDERLANDS SVENSKA РУ ССКИЙ POLSKI 3 Connectez la barre de son à votre téléviseur 1. Connectez une extrémité du câble HDMI au port marqué “eARC” ou “ARC” de votre téléviseur.2. Connectez l'autre extrémité du câble HDMI au port marqué “TV (HDMI eARC/ARC)” ...

5 ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA РУ ССКИЙ POLSKI 4 Branchez les cordons d'alimentation à une prise murale Connectez les cordons d’alimentation fournis à la Barre de son et au Subwoofer, puis insérez les fiches dans une prise de courant. Allumez la barre de son et le voy...

6 ENGLISH DEUTSCH FRANÇAIS ITALIANO ESP AÑOL NEDERLANDS SVENSKA РУ ССКИЙ POLSKI Allumez votre téléviseur et vérifi ez que vous entendez le son émis par la barre de son. • Si vous entendez un écho ou du son provenant des haut-parleurs du téléviseur, désactivez les haut-parleurs du téléviseur dans le m...

7 ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA РУ ССКИЙ POLSKI Les voyants de la barre de son indiquent l'alimentation, la source d'entrée, le format audio et d'autres informations d'état. Source d’entrée Arrêt (veille)Activé Alimentation Dolby Atmos ® Dolby ® (autre que Atmos) Forma...

8 ENGLISH DEUTSCH FRANÇAIS ITALIANO ESP AÑOL NEDERLANDS SVENSKA РУ ССКИЙ POLSKI Avant de pouvoir diffuser de la musique depuis votre périphérique Bluetooth vers la Barre de son, vous devez d’abord “apparier” la Barre de son et votre périphérique. q Appuyez sur la touche (Bluetooth) de la barre de so...

Trademark information Dolby, Dolby Vision, Dolby Atmos, and the double-D symbol are registered trademarks of Dolby Laboratories Licensing Corporation. Manufactured under license from Dolby Laboratories. Confidential unpublished works. Copyright © 2012–2021 Dolby Laboratories. All rights reserved. Th...