Denon AVR-990 - Manuals - manualsarea.com

Page 3 - MENU; Set the address of Gateway when Gateway is on the local network.

-3- NETWORK SETUP of AVR-3310/AVR-990/AVC-3310 >Procedure of Network Setup mode. (1)Press MENU button, then System Setup Menu appears on FL-display(and GUI) (2)Select “Manual Setup > Network Setup > Network Connecting > Detail” . (3)Set parameters described below. <DHCP> "ON...

Page 4 - Protocol specification; Basic specification

-4- Protocol specification The following three data forms are defined. COMMAND : The message sent to a system(AVR) from a controller(Touch Panel etc.) A command to a system is given from a controller. EVENT : The message sent to a controller (Touch Panel etc.) from a system (AVR) The result is sen...

Page 5 - The example of a command; RESPONSE

-5- The example of a command * <CR> is the meaning of 0x0D. SIDVD<CR> : Select Input source DVD MSSTEREO<CR> : surround Mode Set to STEREO MVUP<CR> : Master Volume UP PWON<CR> : system PoWer ON PWSTANDBY<CR> : system PoWer STANDBY SI?<CR> : Request command f...

Page 6 - Others

-6- Others A) COMMAND is receivable also during transmission of EVENT . B) Since CHANNEL VOLUME changes simultaneously when the SURROUND MODE changes, the value of the channel volume of all channels returns as EVENT . C) CHANNEL VOLUME returns the data of ALL channels by the present SURROUND MODE al...

Page 7 - COMMAND and PARAMETER list; COMMAND PARAMETER

-7- COMMAND and PARAMETER list COMMAND PARAMETER function example PW ON POWER ON/STANDBY change PWON<CR> STANDBY PWSTANDBY<CR> ? Return PW Status PW?<CR> MV UP MASTER VOLUME UP/DOWN , direct change to **dB MVUP<CR> DOWN MVDOWN<CR> ** **:00 to 99 by ASCII , 80=0dB, 99=--...

Page 24 - HD RADIO Control(North America model only)

-24- ※ HD RADIO Control(North America model only) COMMAND PARAMETER function example TF HDUP HD Channel UP/DOWN , direct change TFHDUP<CR> HDDOWN TFHDDOWN<CR> HD****** (6 digits) --- ****.** kHz at AM band (>050000 is AM.) ****.** MHz at FM band (<050000 is FM.) TFHD105000<CR>...

Page 27 - Pod dock Extended Control

-27- ※ i Pod dock Extended Control iPod Dock which AVR-3310/AVR-990/AVC-3310 can connect with is ASD-1R/11R. COMMAND PARAMETER function example IP 90 “Cursor Up” Control IP90<CR> 91 “Cursor Down” Control IP91<CR> 92 “Cursor Left” Control IP92<CR> 93 “Cursor Right” Control IP93<C...

Page 28 - Remote Lock/Panel Lock; UPGRADE ID Display

-28- ※ Cursor/Enter/Menu(Setup) COMMAND PARAMETER function example MN CUP “Cursor Up” Control MNCUP<CR> CDN “Cursor Down” Control MNCDN<CR> CLT “Cursor Left” Control MNCLT<CR> CRT “Cursor Right” Control MNCRT<CR> ENT “Enter” Control MNENT<CR> RTN “RETURN” Control MN...

Page 30 - EVENT PARAMETER

-30- EVENT PARAMETER function example SI SIRIUS (North America model Only) SISIRIUS<CR> HDRADIO (North America model Only) SIHDRADIO<CR> IPOD SIIPOD<CR> RHAPSODY (North America model Only) SIRHAPSODY<CR> NAPSTER (except Japan , China model) SINAPSTER<CR> IRADIO (except ...

Page 40 - ANALOG TUNER Control (AVR model only.except North America model)

-40- ※ ANALOG TUNER Control (AVR model only.except North America model) EVENT PARAMETER function example TF AN****** (6 digits) TUNER Frequency change TFAN105000<CR> --- ****.** kHz at AM band (1050.00kHz at AM) ****.** MHz at FM band TP AN**(PRESET No.) TUNER PRESET change to No.** TPANA1<...

Page 41 - function example

-41- ※ SIRIUS Control （ North America Model Only ） EVENT PARAMETER function example TF ST*** (3 digits) --- ***:ST CH No. TFST001<CR> (ST001 CH at SIRIUS TUNER) STPL ON Parental Lock Status “ON” TFSTPL ON<CR> STPL OFF Parental Lock Status “OFF” TFSTPL OFF<CR> STUL OK Unlocking is s...

Page 44 - NSE

-44- EVENT PARAMETER function NSE Onscreen Display Information(mserver/iRadio) isAnswered By the NSE Command. 0 Display Line1 Information NSE0**************_?????<CR> 1 Display Line3 Information NSE1 ※ ************_?????<CR> 2 Display Line4 Information NSE2 ※ ************_?????<CR>...

Page 45 - iPod Extended Control

-45- ※ iPod Extended Control EVENT PARAMETER function IPA Onscreen Display Information is Answered By the IPA Command. 0 Display Line1 Information IPA0***************_???<CR> 1 Display Line3 Information IPA1 ※ *************_???<CR> 2 Display Line4 Information IPA2 ※ *************_?...