Page 2 - SAFETY PRECAUTIONS; CAUTION; RISK OF ELECTRIC SHOCK; IMPORTANT SAFETY
I n SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle,...
Page 3 - II; NOTES ON USE; CAUTIONS ON INSTALLATION
II n NOTES ON USE WARNINGS • Avoid high temperatures. Allow for sufficient heat dispersion when installed in a rack. • Handle the power cord carefully. Hold the plug when unplugging the cord. • Keep the unit free from moisture, water, and dust.• Unplug the power cord when not using the unit for long...
Page 4 - Getting started; Basic version; Advanced version; Information; Contents
1 Thank you for purchasing this DENON product. To ensure proper operation, please read this owner’s manual carefully before using the product. After reading them, be sure to keep them for future reference. Getting started Basic version ································································...
Page 5 - Features; Easy to use, Graphical User Interface; iPod; Accessories
2 Features Fully discrete, identical quality and power for all 7 channels (135 W x 7ch) The unit is equipped with a power amplifier that reproduces highfidelity sound in surround mode with equal quality and power for all channels, true to the original sound.The power amplifier circuit adopts a discr...
Page 6 - Cautions on handling; All sources are up-scaled to 1080p
3 Cautions on handling • Before turning the power on Check once again that all connections are correct and that there are no problems with the connection cables. • Power is supplied to some of the circuitry even when the unit is set to the standby mode. When going on vacation or leaving home for lon...
Page 7 - Connections; For speaker connections, see; Basic v
Basic version 4 F Connections v page 5 F Settings v page 19 F Playback (Basic operation) v page 26 F Selecting a listening mode (SURROUND MODE) v page 52 Connection v page 8 , 10 Connection v page 8 , 11 Playback – Playback v page 28 Connection v page 8 , 11 Connection v page 16 Playback v page 28 P...
Page 8 - Important information; NOTE; Flow of video signals for MAIN ZONE
5 Important information • Make connections as follows before using this unit. Select an appropriate connection type according to the devices to be connected. • You may need to make some settings on this unit depending on the connection method. Refer to each description for more information. • Select...
Page 9 - Examples of screen display
6 Important information • The video conversion function supports the NTSC, PAL, SECAM, NTSC 4.43, PAL-N, PAL-M and PAL-60 formats. • The resolution of the video signal output from the HDMI connector of this unit is set in “Resolution” ( v page 90 ) in the menu ( v page 136 ). • Resolutions of HDMI-c...
Page 10 - Connecting an HDMI-compatible device
7 Connecting an HDMI-compatible device You can connect up to eight HDMI-compatible devices (7-inputs/1-output) to the unit. HDMI function This unit supports the following HDMI functions: • 3D• Deep Color ( v page 137 ) • Auto Lip Sync ( v page 106 , 137 ) • “x.v.Color”, sYCC601 color, Adobe RGB colo...
Page 11 - Cables used for connections
8 Connecting an HDMI-compatible device OUT HDMI G Front panel H Digital camcorder • When this unit is connected to other devices with HDMI cables, connect this unit and TV also with an HDMI cable. • When connecting a device that supports Deep Color, please use a “High Speed HDMI cable” or “High Spee...
Page 12 - Connecting to a device equipped with a DVI-D connector; Settings related to HDMI connections
9 Connecting an HDMI-compatible device Connecting to a device equipped with a DVI-D connector When an HDMI/DVI conversion cable (sold separately) is used, the HDMI video signals are converted to DVI signals, allowing connection to a device equipped with a DVI-D connector. NOTE • No sound is output w...
Page 13 - in Set as Necessary; Connecting a TV
10 IN VIDEO AUDIO OPTICAL OUT VIDEO COMPONENT VIDEO Y P B P R IN TV Set this to change the digital input connector or component video input connector to which the input source is assigned. “Input Assign” ( v page 88 ) in Set as Necessary Connecting a TV • Select the connector to use and connect the ...
Page 14 - Connecting a Blu-ray Disc player/DVD player
11 Connecting a Blu-ray Disc player/DVD player • You can enjoy video and audio from a Blu-ray Disc or DVD. • Select the connector to use and connect the device.• For instructions on HDMI connections, see “Connecting an HDMI-compatible device” ( v page 7 ). Cables used for connections Video cable (so...
Page 16 - Connecting a digital video recorder
13 R L R L R L R L R L R L OUT IN AUDIO VIDEO VIDEO OUT OPTICAL IN AUDIO AUDIO OUT VIDEO OUT S-VIDEO VIDEO AUDIO Digital video recorder Set this to change the digital input connector or component video input connector to which the input source is assigned. “Input Assign” ( v page 88 ) in Set as Nece...
Page 17 - Connecting a digital camcorder; Connecting a control dock for iPod
14 Connecting a digital camcorder • You can enjoy video and audio from a digital camcorder.• For instructions on HDMI connections, see “Connecting an HDMI-compatible device” ( v page 7 ). Cables used for connections Video cable (sold separately) Video cable Audio cable (sold separately) Audio cable ...
Page 19 - Connecting an antenna; AM loop antenna assembly; Connecting a CD player
16 Connecting an antenna • Connect the FM antenna or AM loop antenna supplied with the unit to enjoy listening to radio broadcasts. • After connecting the antenna and receiving a broadcast signal ( v page 33 “Listening to FM/AM broadcasts”), fix the antenna with tape in a position where the noise l...
Page 20 - Required system; Broadband internet connection
17 Connecting to a home network (LAN) • This unit lets you play via your home network (LAN) music files stored on a computer and music content such as that from Internet radio.You can also operate this unit from a computer using the Web control function. • You can update by downloading the latest fi...
Page 21 - Connecting an external control device; REMOTE CONTROL jacks; TRIGGER OUT jacks
18 Connecting an external control device REMOTE CONTROL jacks If this unit is installed in a location that is out of range of the signal from the remote control unit, you can still operate the unit and the devices connected to it by using a commercially available IR receiver.You can also use it to r...
Page 22 - df; Settings; Selecting a listening mode (SURROUND MODE); About setup microphone placement
19 The acoustic characteristics of the connected speakers and listening room are measured and the optimum settings are made automatically. This is called “Audyssey® Auto Setup”.To perform measurement, place the setup microphone in multiple locations all around the listening area. For best results, w...
Page 23 - Set up the subwoofer; When using a subwoofer with a direct mode; Set up the microphone; Set up the remote control unit; Set up the zone mode; ZONE SELECT; Press ZONE SELECT; Set up the operation mode; AMP; Press AMP
20 2 Set up the subwoofer If using a subwoofer capable of the following adjustments, set up the subwoofer as shown below. n When using a subwoofer with a direct mode Set the direct mode to “On” and disable the volume adjustment and crossover frequency setting. n When using a subwoofer without a dire...
Page 24 - ENTER; When performing Audyssey® Auto Setup over; ENTER; When measuring has stopped; RETURN; Setting up the speakers again; ENTER; to select “Next → Measurement” and then; ENTER
21 STEP 1 Preparation STEP 2 Detection & Measurement (Main) Set up speakers (Audyssey® Auto Setup) 4 Connect the setup microphone to the SETUP MIC jack of this unit. AUDYSSEY AUTO SETUP 1 2 3 4 5 6 Amp Assign RETURN Auto Setup Start Channel Select STEP1 Preparation Connect the speakers and place...
Page 25 - to select “Next →
22 STEP 4 Calculation Set up speakers (Audyssey® Auto Setup) 10 Repeat step 9, measuring positions 3 to 8. When measurement of position 8 is completed, a “Measurements finished.” message is displayed. AUDYSSEY AUTO SETUP 1 2 3 4 5 6 RETURN Next Calculation Retry STEP3 Measurement (Finish) Proceed to...
Page 26 - When turning Dynamic Volume® on; When turning Dynamic Volume® off; Store; to select “Next → Store” and then press
23 Set up speakers (Audyssey® Auto Setup) 14 Select “Store” and then press ENTER . Save the measurement results. AUDYSSEY AUTO SETUP 1 2 3 4 5 6 STEP6 Store Now storing...Please wait. 20% AUDYSSEY AUTO SETUP 1 2 3 4 5 6 RETURN Store STEP6 Store Apply and store measurement result Enter Cancel Press “...
Page 27 - Error messages
24 Error messages NOTE • An error message is displayed if Audyssey® Auto Setup could not be completed due to speaker placement, the measurement environment, etc. If this happens, check the relevant items, be sure to take the necessary measures, then perform Audyssey® Auto Setup over again. • If the ...
Page 28 - Parameter Check; Retrieving Audyssey® Auto Setup settings; Making the network settings; page 5 “Getting Started”
25 Parameter Check This function enables you to check the measurement results and equalizer characteristics after Audyssey® Auto Setup. 1 Use ui to select “Parameter Check” and then press ENTER . SPEAKER SETUP Auto Setup Amp Assign Speaker Config. Bass Setting Distance Channel Level Audyssey Auto Se...
Page 29 - Selecting the input source; Press the input source select button; Using the knob on the main unit; SOURCE SELECT
26 Playback (Basic operation) n Playing a Blu-ray Disc player/DVD player ( v page 28 ) n Playing a CD player ( v page 28 ) n Playing an iPod ( v page 29 ) n Tuning in radio stations ( v page 33 ) n Playing a network audio ( v page 35 ) n Playing a USB memory device ( v page 50 ) Selecting a listenin...
Page 30 - Using the “SOURCE SELECT” menu; uio; Adjusting the master volume; Use; to adjust the volume.; When the “Volume Display” setting (; Turning off the sound temporarily; Press
27 n Using the “SOURCE SELECT” menu Switch the remote control unit to the J (MAIN ZONE) mode when performing this operation ( v page 118 “Operating AV devices”). If the remote control unit is in K (ZONE2) mode, the “SOURCE SELECT” menu will not be displayed when SOURCE SELECT is pressed. BD Recent P...
Page 31 - player; Playing a CD player; ON
28 Playing a Blu-ray Disc player/DVD player The following describes the procedure for playing Blu-ray Disc player/ DVD player. 1 Prepare for playback. q Turn on the power of the TV, subwoofer and player. w Change the TV input to the input of this unit. e Load the disc in the player. 2 Press ON to tu...
Page 32 - Playing an iPod; Use a DENON control dock for iPod to; Listening to music on an iPod; SEARCH; to select the file to be played.; STATUS
29 Playing an iPod There are two methods for iPod playback. q Use a DENON control dock for iPod to play back. You can play back both video, photo and audio. w Connect an iPod directly to the USB port to play back ( v page 31 ). You can play back audio only. q Use a DENON control dock for iPod to pla...
Page 33 - Viewing videos on an iPod in the Browse mode; to select the video file,; Viewing photos and videos on an iPod in the; iPod operation
30 n Viewing videos on an iPod in the Browse mode When an iPod equipped with a video function is connected to a DENON ASD-11R control dock for iPod, image files can be played in the Browse mode. 1 Use ui to select “Videos”, then press ENTER or p . 2 Use ui to select the search item or folder, then p...
Page 35 - iPod play function
32 Playing an iPod n iPod operation Operation buttons Function MENU Amp menu uio p Cursor operation / Auto search (cue, ui ) / Manual search (Press and hold, ui ) ENTER (Press and release) Enter / Pause ENTER (Press and hold) Stop SEARCH (Press and release) Page search z 1 / Character sort z 2 SEARC...
Page 36 - Tuning in radio stations; Listening to FM/AM broadcasts; Presetting radio stations (Manual preset); Default settings; Specify a name for the preset broadcast station
33 Tuning in radio stations Listening to FM/AM broadcasts 1 Press TUNER to switch the input source to “TUNER”. 2 Press BAND to select “FM” or “AM”. FM When listening to an FM broadcast. AM When listening to an AM broadcast. TUNER CH MEMORY Memory SEARCH Search Now Playing Band Tuning AUTO Mode Prese...
Page 37 - Listening to preset stations; SHIFT; CH –; Direct frequency tuning
34 Tuning in radio stations n Listening to preset stations 1 Press SHIFT to select the memory block (A to G). CH A MEMORY Memory SEARCH Search Band TuningPreset CH+/- FM 97.90MHz ST.Name HD1 Song TitleArtist Name Program Type STEREO Mode TUNER A8 FM 90.10MHzA7 FM 90.10MHzA6 FM 90.10MHzA5 A4 FM 107.9...
Page 38 - Playing a network audio; About the internet radio function; Media player
35 Playing a network audio Follow this procedure to play Internet radio stations or music or still picture (JPEG) files stored on a computer . Important information n About the internet radio function • Internet radio refers to radio broadcasts distributed over the Internet. Internet radio stations ...
Page 39 - About Flickr
36 Playing a network audio G Compatible formats H Internet radio Media server z 1 WMA (Windows Media Audio) P P MP3 (MPEG-1 Audio Layer-3) P P WAV P MPEG-4 AAC P z 2 FLAC (Free Lossless Audio Codec) P JPEG P A server or server software compatible with distribution in the corresponding formats is req...
Page 40 - Listening to internet radio; Playing the last played Internet radio station; INTERNET RADIO; Recently played internet radio stations
37 Playing a network audio Listening to internet radio 1 Prepare for playback. q Check the network environment, then turn on this unit’s power ( v page 17 “Connecting to a home network (LAN)”). w If settings are required, make the “Network Connecting” ( v page 108 ). 2 Press NET/USB to switch the in...
Page 41 - OK; PRESET
38 Playing a network audio n Searching stations by keyword (Alphabetic strings) 1 Press ui to select “Search by Keyword”, then press ENTER or p . Station a n 0 _ b o 1 / c P 2 : d q 3 ˜ e r 4 ? f s 5 [ g t 6 \ h u 7 ] i v 8 ˆ j w 9 ` k x . { l y @ | m z - } Search by Keyword a/A SPACE INSERT DELETE ...
Page 43 - Playing files stored on a computer; including the file to be played,; Repeat step 4 until the file is displayed.; to select the file, then press; Playing files that have been preset or registered; Media server operation
40 Playing a network audio Playing files stored on a computer Use this procedure to play music files, image files or playlists. 1 Prepare for playback. q Check the network environment, then turn on this unit’s power ( v page 17 “Connecting to a home network (LAN)”). w If settings are required, make ...
Page 44 - Viewing photographs on the Flickr site; Viewing photographs shared by particular users; to select the file, and then press; to select the file, and then press
41 Playing a network audio Viewing photographs on the Flickr site You can view photographs shared by particular users, or all of the photographs shared on Flickr. n Viewing photographs shared by particular users 1 Prepare for playback. q Check the network environment, then turn on this unit’s power ...
Page 45 - Flickr operation
42 n Flickr operation Operation buttons Function INTERNET RADIO V Last played internet radio station PRESET 1 – 3 Preset channel (1 – 3) selection CH +, – Preset channel (A1 – G8) selection MENU Amp menu uio p Cursor operation / Auto search (cue, ui ) ENTER (Press and release) Enter ENTER (Press and...
Page 46 - Listening to Napster; Searching from Napster menu; Registering tracks in my Napster library
43 Playing a network audio Listening to Napster 1 Prepare for playback. q Check the network environment, then turn on this unit’s power ( v page 17 “Connecting to a home network (LAN)”). w If settings are required, make the “Network Connecting” ( v page 108 ). 2 Press SOURCE SELECT to display the “S...
Page 47 - Napster operation
44 n Napster operation Operation buttons Function INTERNET RADIO V Last played internet radio station PRESET 1 – 3 Preset channel (1 – 3) selection CH +, – Preset channel (A1 – G8) selection MENU Amp menu uio p Cursor operation / Auto search (cue, ui ) ENTER (Press and release) Enter ENTER (Press an...
Page 48 - Listening to Pandora
45 Playing a network audio Listening to Pandora 1 Prepare for playback. q Check the network environment, then turn on this unit’s power ( v page 17 “Connecting to a home network (LAN)”). w If settings are required, make the “Network Connecting” ( v page 108 ). 2 Press SOURCE SELECT to display the “S...
Page 49 - Creating an original radio station; Listening to a created radio station; Listening to created radio stations at random
46 Playing a network audio n Creating an original radio station You can create up to 100 original radio stations. 1 Use ui to select “New Station”, then press ENTER or p . My Station New Station Quick Mix D&M1 Radio [1/3] RETURN Sign out Exit 2 Input a “Track or Artist”, then press OK . New Stat...
Page 50 - Arranging tracks within radio stations; While the Pandora top menu is; When the popup menu appears, press; o p; to select; Pandora operation
47 Playing a network audio n Arranging tracks within radio stations You can sort tracks by operating the Pandora menu screen while a track is playing. Press p while a track is playing. The Pandora menu screen is displayed. Menu I like this track I don’t like this track Bookmark this trackI’m tired o...
Page 51 - Listening to Rhapsody
48 Playing a network audio Listening to Rhapsody 1 Prepare for playback. q Check the network environment, then turn on this unit’s power ( v page 17 “Connecting to a home network (LAN)”). w If settings are required, make the “Network Connecting” ( v page 108 ). 2 Press SOURCE SELECT to display the “...
Page 52 - Track menu; Search from the similar music; Registering tracks in my library; Rating function; Rhapsody operation
49 Playing a network audio n Track menu Press p during playback to display the track menu. Rhapsody Jump to artist Jump to album Similar artists Similar albumsAdd to my libraryRating [1/6] CH +/- Preset q w e q Search from the similar music Use ui to select the search item, then press ENTER or p . w...
Page 53 - Playing a USB memory device; Album art function
50 Playing a USB memory device Playing back music or still picture (JPEG) files recorded on a USB memory device. Important information n USB memory devices A USB memory device can be connected to the USB port of this unit to play music and still picture (JPEG) files stored on the USB memory device.A...
Page 54 - USB operation
51 Playing files stored on USB memory devices 1 Connect the USB memory device to the USB port ( v page 15 “Connecting an iPod or USB memory device to the USB port”). 2 Press NET/USB to switch the input source to “NET/USB”. DENON:[AVR-2312CI] Favorites Internet Radio FlickrNapster Pandora Media Serve...
Page 55 - Selecting a listening mode; Play the selected device; MOVIE; DIRECT; to select a listening mode.; Listening mode
52 Selecting a listening mode (SURROUND MODE) This unit can play input audio signals in multi-channel surround mode or in stereo mode.Select a listening mode suitable for the playback contents (cinema, music, etc.) or according to your liking. Selecting a listening mode 1 Play the selected device ( ...
Page 56 - Views on the TV screen or display
53 Selecting a listening mode Operation button Input signal Listening mode 2-channel z 1 STEREODOLBY PL g x Game z 2 DOLBY PL g Game z 2 DOLBY PL g z Height z 2 MULTI CH STEREOVIDEO GAMEVIRTUAL Multi-channel z 3 STEREO Dolby Digital DOLBY DIGITALDOLBY DIGITAL EXDOLBY DIGITAL + PL g z Dolby TrueHD DO...
Page 57 - Description of listening mode types
54 Selecting a listening mode n Description of listening mode types Dolby listening mode Listening mode type Description DOLBY PL g x z 1 This mode can be selected when a Dolby Pro Logic g x decoder is used to play back 2-channel source in 6.1/7.1-channel surround sound including the surround back c...
Page 58 - DENON original listening mode
55 Selecting a listening mode DENON original listening mode Listening mode type Description MULTI CH STEREO This mode is for enjoying stereo sound from all speakers.The same sound as that from the front speakers (L/R) is played back at the same level from the surround speakers (L/R) and surround bac...
Page 59 - How to make detailed settings; dv
Advanced version 56 F Speaker installation/connection (Advanced connection) v page 57 F Playback (Advanced operation) v page 68 F Playback in ZONE2 (Separate room) v page 79 F How to make detailed settings v page 82 F Operating the connected devices by remote control unit v page 118 Advanced version...
Page 60 - Procedure for speaker settings; Install
57 Here we describe the installation, connection and setup methods for speakers other than 5.1-channel speakers. For the installation, connection and setup methods for 5.1-channel speakers, see C page 4 “SETUP WIZARD” . Use Audyssey® Auto Setup function of this unit to automatically detect the numbe...
Page 61 - When Front A/B speakers installed
58 Install When 7.1ch (Front height speaker) installed FL FR FHR FHL C SL SR SW z 1 z 2 z 3 Listening position z 1 22˚ – 30˚ z 2 22˚ – 45˚ z 3 90˚ – 110˚ G Speaker abbreviations H FL Front speaker (L) SB Surround back speaker FR Front speaker (R) FHL Front height speaker (L) C Center speaker FHR Fro...
Page 62 - Connect
59 Connect • For the method of connecting 5.1-channel speakers, see C page 6 “Connecting the speakers” . • For the method of connecting the TV, see C page 3 “Connect this unit to the television using an HDMI cable (sold separately)” . 7.1-channel (Surround back speaker) connection The illustration o...
Page 65 - For connecting two subwoofers
62 2.1-channel connection FL FR SW NOTE • For speaker cable connections, see C page 6 “Connecting the speakers” . • For speaker impedance , see page 59 . n For connecting two subwoofers Two subwoofers can be connected to this unit.The same signal is output from each subwoofer terminal. Front A/B con...
Page 67 - Multi channel playback
64 Connect FL FL’ FR FR’ C SW SL SR Multi channel playback (Surround mode) 2-channel playback (Direct/Stereo mode) Switching 5.1-channel + 2-channel connection You can connect the other front speakers for 2-channel playback using the DIRECT mode or STEREO mode.The speakers used exclusively for 5.1-c...
Page 68 - Set up speakers; Set up “Amp Assign”
65 1 Set up the remote control unit n Set up the zone mode Press ZONE SELECT to switch the zone mode to J (MAIN ZONE). The J indicator lights. Press ZONE SELECT n Set up the operation mode Press AMP to set the remote control unit to AMP- operation mode. Press AMP 2 Connect the setup microphone. AUDY...
Page 69 - Set up “Channel Select”; configuration of the connected
66 Set up speakers 6 Set up “Channel Select” Use ui to select “Channel Select”, and then press ENTER . AUDYSSEY AUTO SETUP 1 2 3 4 5 6 Amp Assign RETURN Auto Setup Start Channel Select STEP1 Preparation Connect the speakers and place them according to the recommendations in the manual, Set the follo...
Page 71 - Convenient functions; HDMI control function; Operations possible by HDMI control; Setting procedure
68 n HDMI control function ( v page 68 ) n Sleep timer function ( v page 69 ) n Adjusting the volume of the speakers ( v page 70 ) n Quick select function ( v page 71 ) n REC OUT mode ( v page 72 ) n AirPlay ( v page 73 ) n Party mode function ( v page 74 ) n Zone Management function ( v page 75 ) n...
Page 72 - Sleep timer function; and display the time you; SLEEP; To confirm the countdown time before putting the; SLEEP; To cancel the sleep timer; SLEEP
69 Convenient functions NOTE • When “HDMI Control” – “Control” is set to “ON”, it consumes more standby power. • The HDMI control function controls operations of a TV that is compatible with the HDMI control function. Make sure that the TV and HDMI are connected when you perform HDMI control. • Some...
Page 73 - Adjusting the volume of the speakers; Adjusting the volume of the different speakers; Adjusting the volume of groups of speakers
70 Convenient functions Adjusting the volume of the speakers You can adjust the channel level either according to the playback sources or to suit your taste, as described below. n Adjusting the volume of the different speakers 1 Press ZONE SELECT to switch the zone mode to J (MAIN ZONE). The J indic...
Page 74 - Quick select function; Saving the settings; Recalling the settings; QUICK SELECT; Naming quick select settings; QUICK SELECT
71 Convenient functions Quick select function All of the settings in step 1 can be memorized together. By memorizing frequently used settings, you can quickly access and enjoy a playback environment that is consistently the same. n Saving the settings 1 Set the items below to the settings you want t...
Page 75 - REC OUT mode
72 Convenient functions REC OUT mode When using the audio/video recording connectors (DVR outputs), you can record the audio or video from a different program source while listening to the currently played track. 1 Press ZONE2 / REC SELECT until “RECOUT SOURCE” is displayed. The indicator illuminate...
Page 76 - AirPlay; Multiple Speakers; Streaming music stored in iPhone, iPod touch,; Remote operations
73 Convenient functions AirPlay Enjoy music from your iTunes library with DENON quality sound anywhere in your home.Use the Apple Remote app z for iPhone, iPod touch and iPad to control iTunes from any room in your home. z Available as a free download from the App Store. n Setting procedure 1 Instal...
Page 77 - Party mode function; Starting the party mode as the organizer; Participating in the party mode as an attendee; Canceling the party mode
74 Party mode function The same network audio (Internet radio, Media server or iPod DIRECT) can be played on multiple DENON products equipped with the Party Mode function and connected in a network.The party mode consists of one organizer and up to four attendees.When one unit starts the party mode ...
Page 78 - Zone Management function; To end “Device Control” mode; MENU
75 Zone Management function The status of devices connected to the same network can be displayed. Additionally, network menu browsers and volume controls can be performed via the network for the connected devices. This is useful when playing back network services of a device located in a separate ro...
Page 79 - Operating a media controller to play music and still pictures; Playing content on a computer (Media server); Playing contents on a media controller
76 Operating a media controller to play music and still pictures • Perform this procedure using a media controller conforming to the DLNA (Digital Living Network Alliance) standard. • This function allows you to play content located on a computer (media server) or connected on a network by operating...
Page 80 - Web control function; Switch the “Network Standby” setting to “ON”.; Enter the IP address of this unit in browser’s address; When the top menu is displayed, click on the menu; y u
77 Web control function You can operate this unit using a browser. 1 Switch the “Network Standby” setting to “ON”. ( v page 110 ). 2 Check the IP address of this unit with “Network Info.” ( v page 111 ). NETWORK INFO. DHCPIP AddressMAC Address OFF 0005cd000000 Friendly Name DENON:[AVR-2312CI] 192.16...
Page 81 - Various memory functions; Personal memory plus function
78 Convenient functions G Example 2 H Setup menu screen SETUP MENU SOURCE SELECT Source Input Assign Video Video Select BD SOURCE Auto Video ModeVideo Converti/p ScalerResolution (analog)Resolution (HDMI)Progressive ModeAspect Auto Game ON OFF Movie Analog Analog & HDMI OFF Auto 480p/576p 1080i ...
Page 82 - Audio output; Zone playback by speaker output; Connecting and setting the speakers
79 Playback in ZONE2 (Separate room) • You can operate this unit so as to enjoy audio in a room (ZONE2) other than the MAIN ZONE (room where the unit is located). • You can simultaneously play back the same source in both the MAIN ZONE and ZONE2. You can also play back separate sources in the MAIN Z...
Page 83 - Playback; SELECT; Adjusting the volume; MASTER VOLUME
80 Playback 1 Press ZONE SELECT to switch the zone mode to K (ZONE2). Input source select buttons 2 Press AMP to set the remote control unit to AMP-operation mode. 3 Press ZONE/DEVICE Z to turn on the ZONE2 power. The indicator on the display lights. • Also press input source select button when in s...
Page 85 - Menu map; Items that only need to be set
82 Menu map For menu operation, connect a TV to this unit and display the menu on the TV screen. For menu operations, see the following page. How to make detailed settings Setting items Detailed items Description Page SOURCE SELECT Displayed items of the “SOURCE SELECT” menu differs, depending on th...
Page 86 - Examples of menu screen displays; Example 1; Icon; List
83 Examples of menu screen displays Typical examples are described below. G Example 1 H Menu selection screen (Top menu) SPEAKER SETUP Auto Setup Amp Assign Speaker Config. Bass Setting Distance Channel Level Make detailed speaker settings q List of GUI menu setup icons w Currently selected setup ic...
Page 87 - Examples of menu and front display; Menu display; Top menu display; Display when changing settings; Display when resetting
84 Examples of menu and front display Below we describe typical examples of displays on the TV screen and on the set’s display window. Menu display Front display Description Top menu display AUDIO/VIDEO ADJUST Audio Adjust Picture Adjust Adjust various audio and video parameters w w A / V A d j u s ...
Page 88 - Inputting characters; Method for inputting characters; Keyboard screen; Display of a keyboard input screen; Using the keyboard screen
85 Inputting characters You can change the names as desired using the “Preset Name” ( v page 93 ), “Rename” ( v page 91 ), “Rhapsody Account” ( v page 111 ), “Napster Account” ( v page 111 ), “Zone Rename” ( v page 114 ), “Quick Select Name” ( v page 114 ) and character input for the network f...
Page 89 - 0 Key input screen; Display of a 10 Key input screen; Using the number buttons; Using the cursor buttons
86 Inputting characters 10 Key input screen n Display of a 10 Key input screen TUNER CD B D DVD TV SAT/CBL DVR RENAME [1/2] RETURN Cancel Enter Input CH+ Insert CH- Delete SEARCH 0-9 Keyboard Default TUNER CD BD DVD TV SAT/CBL DVR q w q Character input section (Maximum 8 characters) w Guide for oper...
Page 90 - Menu operation; About the display of input sources; Items that can be set with the “SOURCE SELECT” procedure
87 SOURCE SELECT Perform settings related to input source playback.• You do not have to change the settings to use the unit. Make settings when needed. Menu operation 1 Press ZONE SELECT to switch the zone mode to J (MAIN ZONE). The J indicator lights. 2 Press AMP to set the remote control unit to A...
Page 91 - Examples of “Input Assign” menu screen displays; Input assignments menu operations
88 SOURCE SELECT Setting items Setting details HDMI Set this to change the HDMI input connectors assigned to the input sources. BD DVD TV SAT/CBL DVR GAME1 GAME2 V.AUX DOCK HDMI 1 / HDMI 2 / HDMI 3 / HDMI 4 / HDMI 5 / HDMI 6 / HDMI 7 None : Do not assign an HDMI input connector to the selected input...
Page 92 - Video
89 Setting items Setting details DIGITAL Set this to change the digital input connectors assigned to the input sources. BD DVD TV SAT/CBL DVR GAME1 GAME2 V.AUX DOCK CD COAX (coaxial) 1, 2 / OPT (optical) 1, 2 None : Do not assign a digital input connector to the selected input source. • At time of p...
Page 94 - Input Mode; Rename; Source Level
91 Input Mode (Audio) Default settings are underlined. The input modes available for selection may vary depending on the input source. Setting items Setting details Input Mode Set the audio input modes for the different input sources.It is normally recommended to set the audio input mode to “Auto”. ...
Page 95 - Playback Mode; Input source : “DOCK”; Still Picture
92 Playback Mode Default settings are underlined. n Input source : “DOCK” Setting items Setting details Repeat Make settings for repeat mode. DOCK All : All files are played repeatedly. One : A file being played is played repeatedly. OFF : Repeat playback mode is canceled. Shuffle Make settings for ...
Page 96 - Preset Skip; Preset Name
93 SOURCE SELECT Preset Skip Default settings are underlined. Set preset channel to be skipped when selecting. Setting items Setting details A – G Set the preset channels you do not want to display. You can set by preset memory block (A to G) or by preset channel (1 to 8). TUNER All : Skip all chann...
Page 97 - Items that can be set with the “AUDIO/VIDEO ADJUST” procedure
94 AUDIO/VIDEO ADJUST Sound field effects for surround sound and video quality can be adjusted. Menu operation 1 Press ZONE SELECT to switch the zone mode to J (MAIN ZONE). The J indicator lights. 2 Press AMP to set the remote control unit to AMP-operation mode. 3 Press MENU . The menu is displayed ...
Page 98 - Surround Parameters
95 Audio Adjust n Surround Parameters Default settings are underlined. The items (parameters) that can be adjusted depend on the signal being input and the currently set surround mode. For details on the adjustable parameters, see “Surround modes and surround parameters” ( v page 131 ). NOTE • Some ...
Page 99 - For 2-channel sources
96 AUDIO/VIDEO ADJUST Setting items Setting details Height Gain Control the front height channel volume. Low : Reduce the front height channel volume. Middle : Front height channel sound is output with standard sound volume. High : Increase the front height channel volume. NOTE “Height Gain” is disp...
Page 100 - Tone
97 AUDIO/VIDEO ADJUST Setting items Setting details Subwoofer Turn subwoofer output on and off. ON : The subwoofer is used. OFF : The subwoofer is not used. NOTE This can be set when the surround mode is “DIRECT” ( v page 52 ) and the “Subwoofer Mode” ( v page 103 ) is “LFE+Main”. Default The “Surro...
Page 101 - Audyssey Settings
98 AUDIO/VIDEO ADJUST n Audyssey Settings Default settings are underlined. Set Audyssey MultEQ® XT, Audyssey Dynamic EQ® and Audyssey Dynamic Volume®. These can be selected after Audyssey® Auto Setup has been performed. For additional information on Audyssey technology, please see page 137 . NOTE • ...
Page 102 - Manual EQ; RESTORER
99 AUDIO/VIDEO ADJUST Manual EQ Default settings are underlined. Use the graphic equalizer to adjust the tone of each speaker.“Manual EQ” can be set when “MultEQ® XT” setting ( v page 98 ) is “Manual”. Setting items Setting details Curve Copy Copy “Audyssey Flat” curve from MultEQ® XT. Yes : Copy. N...
Page 103 - Picture Adjust
100 AUDIO/VIDEO ADJUST Picture Adjust Default settings are underlined. Picture quality can be adjusted. • This item can be set when the input source is BD DVD TV SAT/CBL DVR GAME1 GAME2 V.AUX DOCK NET/USB . • With input sources other than the ones above, this item can be set when “Video Select” is s...
Page 104 - SYSTEM SETUP; Items that can be set with the “SYSTEM SETUP” procedure
101 SYSTEM SETUP Set when changing Audyssey® Auto Setup settings, or when changing the audio, video, display or other settings. • If you change the speaker settings after performing Audyssey ® Auto Setup, it will not be possible to set Audyssey MultEQ® XT, Audyssey Dynamic EQ ® and Audyssey Dynamic ...
Page 105 - Speaker Setup
102 Speaker Setup Default settings are underlined. Perform when setting the speakers manually or when changing settings made in Audyssey® Auto Setup.• If you change the speaker settings after performing Audyssey® Auto Setup, it will not be possible to select Audyssey MultEQ® XT, Audyssey Dynamic EQ®...
Page 109 - HDMI Setup
106 SYSTEM SETUP HDMI Setup Default settings are underlined. Make settings for HDMI video/audio output. Setting items Setting details Auto Lip Sync Make automatic compensation for timing shift in audio and video output. ON : Compensated. OFF : Not compensated. HDMI Audio Out Select HDMI audio output...
Page 110 - Audio Setup
107 SYSTEM SETUP Audio Setup Default settings are underlined. Make settings for audio playback. Setting items Setting details 2ch Direct/Stereo Select the method for setting the speakers used in the 2-channel direct and stereo playback modes. Setting : Select the method for setting the speakers used...
Page 111 - Network Setup
108 Network Setup Default settings are underlined. Make network settings. Setting items Setting details Network Connecting Make settings for wired LAN. Only set “Network Connecting” when connecting to a network without a DHCP function. Detail Exit NETWORK CONNECTING DHCPIP Address OFF192.168.0.1 Ent...
Page 115 - ZONE2 Setup
112 SYSTEM SETUP ZONE2 Setup Default settings are underlined. Set the audio to play back with multi-zone (ZONE2).• “ZONE2” is displayed when “ZONE2” is selected with “Amp Assign” ( v page 102 ). Setting items Setting details Bass Adjust low frequency range (bass). –10dB – +10dB (0dB) Treble Adjust h...
Page 116 - Option Setup; PRESET 1
113 SYSTEM SETUP Option Setup Default settings are underlined. Make various other settings. Setting items Setting details Volume Control Set the MAIN ZONE (room where the unit is located) volume setting. Volume Display : Set how volume is displayed. • Relative : Display ---dB (Min), in the range –80...
Page 117 - When setting for input source; DIMMER
114 SYSTEM SETUP Setting items Setting details GUI (Continued) Master Volume : Display the master volume during adjustment. • Bottom : Display at the bottom. • Top : Display at the top. • OFF : Turn display off. When the master volume display is hard to see when superimposed on movie subtitles, set ...
Page 119 - Language
116 SYSTEM SETUP Language Default settings are underlined. Set the language for display on the menu screen. Setting details English / Español “Language” can also be set by the following procedure. However, the menu screen is not displayed. 1. Press and hold the main unit’s PRESET 1 and PRESET 3 for ...
Page 120 - INFORMATION
117 INFORMATION Show information about receiver settings, input signals, etc. Items Setting details Status Show information about current settings. n MAIN ZONE This item shows information about settings for MAIN ZONE.The information displayed differs according to the input source. Select Source / Na...
Page 121 - Operating the connected devices by remote control unit; Operating AV devices; to select a; Operate this unit or the device whose input source is
118 Operating the connected devices by remote control unit Registering the supplied preset codes in the remote control unit enables you to operate devices made by other manufacturers. Operating AV devices 1 Press ZONE SELECT to select a zone for operation. The zone mode indicator corresponding to th...
Page 122 - Registering preset codes; Buttons used for operating the devices; Default settings for preset codes
119 Registering preset codes When preset codes are registered in the included remote control unit, it can then be used to operate any devices you have, such as DVD players or TVs made by different manufacturers.In this menu, you can search and display the preset codes that can be preset in the inclu...
Page 123 - , select the first letter of the device; Enter a five-digit code using
120 6 Pressing ui , select the first letter of the device brand name. Then press ENTER . A B C Device : DVD D E F G H I REMOTE SETUP GUIDE 1 Please select the first letter of the brand name of the device. Enter RETURN Return Select • The first character is displayed as 1, A to Z. (Initials for the b...
Page 124 - Either of the screens below is displayed.; Operating devices; Press the input source select; DVD player operation; CD player / CD recorder operation
121 Registering preset codes 14 Either of the screens below is displayed. q 1. Press [INPUT SOURCE].2. Press and hold [DEVICE ON ( l )] for 3 seconds.3. Input code with [0-9].4. Press any key to check device. (e.g. [DEVICE ON ( l )]) REMOTE SETUP GUIDE Device Brand Code [1/3] : DVD : DENON : 30490 P...
Page 125 - TV operation; IP TV operation
122 n DVD recorder (DVR) / Personal video recorder (PVR) / video cassette recorder (VCR) operation Operation buttons Function CH +, – Switch channels (up/down) MENU Menu uio p Cursor operation ENTER Enter SETUP Setup RETURN B Return 6 7 Manual search (fast-reverse/fast-forward) 1 Playback 8 9 Auto s...
Page 126 - Resetting the remote control unit
123 Specifying the zone used with the main remote control unit When the ZONE SELECT button is pressed, only the set zone can be operated with the remote control unit. 1 Press and hold ZONE/DEVICE Z for at least 3 seconds. The zone mode indicator flashes twice. 2 Press ZONE SELECT . The zone mode ind...
Page 127 - Part names and functions; Here, we list various information related to this unit.; mation
Information 124 F Part names and functions v page 125 F Other information v page 130 F Troubleshooting v page 140 F Specifications v page 145 F Index v page 146 Information Here, we list various information related to this unit. Please refer to this information as needed. Basic v ersion A dv anced v...
Page 128 - Front panel
125 Front panel For buttons not explained here, see the page indicated in parentheses ( ). Q6 Q7 Q8 Q9 W0 W3 W1 W2 Q5 Q3 Q4 Q2 Q1 o Q0 i u t r y e w q q Power operation button (ON/STANDBY) ································································· ( C 5 ) Turns power to this unit on and off (...
Page 129 - Display; r t
126 Display y u i Q4 Q6 Q8 o Q0 Q2 Q3 Q1 Q5 Q7 w q e r t q Input signal indicators w Input signal channel indicators These light when digital signals are input.When playing HD Audio sources, the indicator lights when a signal from an extension channel (a channel other than the front, center, surroun...
Page 130 - Rear panel
127 Rear panel See the page indicated in parentheses ( ). i q w e r t y o u Q4 Q3 Q1 Q2 Q0 q RS-232C connector ·································································· ( 18 ) w FM/AM antenna terminals ····················································· ( 16 ) e Analog audio connectors ··...
Page 131 - Remote control unit; PHONO
128 Remote control unit For buttons not explained here, see the page indicated in parentheses ( ). q w e r ty ui oQ0 Q1 Q2 Q3 Q4 Q5 Q6 Q8 Q7 W9 W8 W7 W6 W2 W1 W0 Q9 W3 W4W5 q ZONE SELECT button ························ ( 80 , 118 ) w Zone mode indicators ······························ ( 118 ) e Inpu...
Page 132 - Inserting the batteries; Operating range of the remote control unit
129 Remote control unit Inserting the batteries q Slide the rear lid in the direction of the arrow and remove it. w Load the two batteries properly as indicated by the marks in the battery compartment. R6/AA e Put the rear cover back on. NOTE • Insert the specified batteries in the remote control un...
Page 133 - Other information; Trademark information
130 Other information n Trademark information ( v page 130 ) n Surround ( v page 131 ) n Relationship between video signals and monitor output ( v page 135 ) n Explanation of terms ( v page 137 ) Trademark information This product uses the following technologies: Manufactured under license from Dolb...
Page 134 - Surround; Surround modes and surround parameters; Symbols in the table
131 Surround This unit is equipped with a digital signal processing circuit that lets you play program sources in the surround mode to achieve the same sense of presence as in a movie theater. Surround modes and surround parameters This table shows the speakers that can be used in each surround mode...
Page 136 - Types of input signals, and corresponding surround modes
133 Surround n Types of input signals, and corresponding surround modes This table shows the input signal that can be played in each surround mode. Check the audio signal of the input source then select the surround mode. Symbols in the table F This indicates the default surround mode. D This indica...
Page 138 - Relationship between video signals and monitor output
135 Relationship between video signals and monitor output MAIN ZONE MONITOR OUT Video Convert Input connector Output connector Menu displayed HDMI COMPONENT S-VIDEO VIDEO HDMI COMPONENT VIDEO HDMI COMPONENT VIDEO ON/OFF A A A A A A A Only the menu is displayed A A ON A A A S S <VIDEO> S <VI...
Page 139 - Video signal resolution conversion table
136 Video signal resolution conversion table When “Video Convert” ( v page 90 ) is set to “ON”, “i/p Scaler” ( v page 90 ) is set to “Analog”, “Analog & HDMI” or “HDMI” are set, the resolution of the input video signal can be converted to a different resolution for output ( v page 5 “Convertin...
Page 140 - Explanation of terms
137 Explanation of terms A Adobe RGB color, Adobe YCC601 color Like “x.v.Color”, each of these color spaces defines a palette of available colors that is larger than the traditional RGB color model. AirPlay AirPlay sends (plays) contents recorded in iTunes or on an iPhone/iPod touch/iPad to a compat...
Page 143 - Troubleshooting
140 Troubleshooting If a problem should arise, first check the following:1. Are the connections correct?2. Is the set being operated as described in the owner’s manual?3. Are the other devices operating properly? If this unit does not operate properly, check the items listed in the table below. Shou...
Page 147 - Resetting the microprocessor; Turn off the power using; PRESET CHANNEL 2; PRESET CHANNEL 3
144 Resetting the microprocessor Perform this procedure if the display is abnormal or if operations cannot be performed.When the microprocessor is reset, all the settings are reset to their default values. ON/STANDBY PRESET CHANNEL 3 PRESET CHANNEL 2 1 Turn off the power using ON/STANDBY . 2 Press O...
Page 148 - Specifications; Audio section
145 Specifications n Audio section • Power amplifierRated output: Front: 105 W + 105 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.) 135 W + 135 W (6 Ω, 1 kHz with 0.7 % T.H.D.) Center: 105 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.) 135 W (6 Ω, 1 kHz with 0.7 % T.H.D.) Surround: 105 W + 105 W (8 Ω, 20 Hz...
Page 149 - Numerics; Index
146 v Numerics 2.1-channel ························································· 622ch Direct/Stereo ············································· 1073D ········································································· 76.1-channel ··················································· 58, ...
Page 151 - Dimensions
148 Dimensions Unit : in. (mm) 13 21/64 (338.5) 15 3/64 (382.0) 5/8 (16.0) 5 15/16 (151.0) 6 37/64 (167.0) 17 1/8 (435.0) 27/32 (21.5) 55/64 (22.0) Weight : 24 lbs 4 oz (11.0 kg) Basic v ersion A dv anced v ersion Infor mation Infor mation
Denon AVR-882
User Manual
Denon AVR-682
User Manual
Denon DRR-M30
User Manual
Denon DVD-756
User Manual
Denon DHT-1000DV
User Manual
Denon DVD-556
User Manual
Denon AVR-786
User Manual
Denon AVR-683
User Manual
Denon AVR-3802
User Manual
Denon AVR-2805
User Manual