Denon AVR-1613 - Manuals

2 Features With a discrete-circuit configuration, the power amplifier provides identical quality for all 5 channels (120 W x 5ch) The unit is equipped with a power amplifier that reproduces highfidelity sound in sound mode with equal quality and power for all channels, true to the original sound.The...

3 Cautions on handling • Before turning the power on Check once again that all connections are correct and that there are no problems with the connection cables. • Power is supplied to some of the circuitry even when the unit is set to the standby mode. When going on vacation or leaving home for lon...

Basic version 4 F Connections v page 5 F Settings v page 20 F Playback (Basic operation) v page 27 F Selecting a listening mode (Sound Mode) v page 64 Basic version Here, we explain the connections and basic operation methods for this unit. Basic v ersion A dv anced v ersion Infor mation Basic v ers...

5 Important information Make connections before using this unit.To create a home theater that can play back higher quality video and audio by fully utilizing the capabilities of this unit and your video devices, connect this unit to each of your video devices with HDMI cables. n HDMI-compatible devi...

6 Important information Relationship between video signals and monitor output G Flow of video signals H HDMI connector HDMI signal HDMI signal Video signal Video signal Video connector HDMI-compatible TV HDMI-incompatible TV HDMI connector Video connector Video connector HDMI connector HDMI connecto...

7 Connecting an HDMI-compatible device You can connect up to seven HDMI-compatible devices (5-inputs/1-output) to the unit.If the device connected to this unit is equipped with an HDMI connector, it is recommended to use HDMI connections. Connections with an HDMI cable offer the following benefits t...

8 Connecting an HDMI-compatible device n About ARC (Audio Return Channel) function This function plays TV audio on this unit by sending the TV audio signal to this unit via HDMI cable.If a TV without the ARC function is connected via HDMI connections, video signals of the playback device connected t...

9 Connecting an HDMI-compatible device Connecting this unit to a TV via HDMI connections Cables used for connections Audio and video cable (sold separately) HDMI cable (ARC) IN HDMI TV • Video signals are not output if the input video signals do not match the monitor’s resolution. In this case, swit...

10 Connecting an HDMI-compatible device OUT HDMI G Front panel H Digital camcorder • When this unit is connected to other devices with HDMI cables, connect this unit and TV also with an HDMI cable. • When connecting a device that supports Deep Color, please use a “High Speed HDMI cable” or “High Spe...

11 Connecting an HDMI-compatible device n Deep Color ( v page 117 ) When a device supporting Deep Color is connected, use a cable compatible with “High Speed HDMI cable” or “High Speed HDMI cable with Ethernet”. n Auto Lip Sync ( v page 87 , 117 ) n “x.v.Color”, sYCC601 color, Adobe RGB color, Adobe...

12 Connecting an HDMI-incompatible device For high quality video and surround playback, it is recommended to use an HDMI cable to connect this unit to TV and other video devices ( v page 7 “Connecting an HDMI-compatible device”). This section describes connections when your device does not support H...

13 Connecting a TV • This section describes how to connect when your TV does not support HDMI connections.For instructions on HDMI connections, see “Connecting an HDMI-compatible device” ( v page 7 ). • If the TV connected to this unit is equipped with an HDMI connector that supports ARC, digital au...

15 Connecting an HDMI-incompatible device Connecting a DVD player This section describes how to connect when your DVD player does not support HDMI connections.For instructions on HDMI connections, see “Connecting an HDMI-compatible device” ( v page 7 ). n Audio connection The following methods are a...

16 Connecting an iPod or USB memory device to the iPod/USB port • You can enjoy music stored on an iPod or USB memory device. • For operating instructions see “Playing an iPod” ( v page  29 ) or “Playing a USB memory device” ( v page 32 ). Cables used for connections To connect an iPod to this unit,...

17 Connecting an FM antenna • Connect the FM antenna supplied with the unit to enjoy listening to radio broadcasts. • After connecting the antenna and receiving a broadcast signal ( v page  35 “Listening to FM broadcasts”), fix the antenna with tape in a position where the noise level becomes minima...

18 Connecting to a home network (LAN) You can connect this unit to your home network (LAN) to perform various types of playbacks and operations as follows. Make network connections for this unit by carefully reading information on this page. • Playback of network audio such as the Internet radio and...

19 Connecting the power cord After completing all the connections, insert the power plug into the power outlet. To household power outlet (AC 120 V, 60 Hz) Power cord NOTE • Do not plug in the power cord until all connections have been completed. • Do not bundle power cords together with connection ...

20 The acoustic characteristics of the connected speakers and listening room are measured and the optimum settings are made automatically. This is called “Audyssey® Setup”.To perform measurement, place the setup microphone in multiple locations all around the listening area. For best results, we rec...

21 2 Set up the subwoofer If using a subwoofer capable of the following adjustments, set up the subwoofer as shown below. For details, see your subwoofer’s manual. n When using a subwoofer with a direct mode Set the direct mode to “On” and disable the volume adjustment and crossover frequency settin...

22 Detection & Measurement (Main) Set up speakers (Audyssey® Setup) 4 Select “Start” and then press ENTER . The subwoofer volume setting screen is displayed. 5 Select “Next” and then press ENTER . Audyssey Setup MultEQ I f y o u r s u b w o o f e r h a s a v o l u m e c o n t r o l o n i t , p l...

23 Calculation Set up speakers (Audyssey® Setup) 10 Repeat step 9, measuring positions 3 to 6. When measurement of position 6 is completed, a “Measurements Complete.” message is displayed. Audyssey Setup M e a s u r e m e n t s C o m p l e t e . Calculation MultEQ Repeat Last Test 11 Select “Calcula...

24 Set up speakers (Audyssey® Setup) 13 Select “Store” and then press ENTER . Save the measurement results. Audyssey Setup N o w S t o r i n g . . . p l e a s e w a i t . . . MultEQ 75% Audyssey Setup C h e c k p r o c e s s i n g r e s u l t . T o p r o c e e d , s e l e c t “ S t o r e ” . Speaker...

25 Error messages NOTE • An error message is displayed if Audyssey® Setup could not be completed due to speaker placement, the measurement environment, etc. If an error message is displayed, check the relevant items and perform the necessary measures. Then perform Audyssey® Setup again. • If the res...

26 Parameter Check This function enables you to check the measurement results and equalizer characteristics after Audyssey® Setup. 1 Use ui to select “Parameter Check” and then press ENTER . Audyssey Setup Y o u r A V R c a n a u t o m a t i c a l l y m e a s u r e t h e a c o u s t i c s o f y o u ...

27 Playback (Basic operation) Settings ( v page 20 ) n Turning the power on ( v page 27 ) n Selecting the input source ( v page 27 ) n Adjusting the master volume ( v page 28 ) n Turning off the sound temporarily ( v page 28 ) n Playing a Blu-ray Disc player/DVD player ( v page 28 ) n Playing an iPo...

28 Adjusting the master volume Use VOLUME df to adjust the volume. • The volume display method varies depending on the “Scale” setting ( v page 83 ). n When the “Scale” setting ( v page 83 ) is “0 – 98” G Adjustable range H 0.0 0.5 – 98.0 n When the “Scale” setting ( v page 83 ) is “–79.5dB – 18.0dB...

29 Playing an iPod You can use the USB cable provided with the iPod to connect the iPod with the unit’s iPod/USB port and enjoy music stored on the iPod.For information on the iPod models that can be played back with this unit, see “Connecting an iPod or USB memory device to the iPod/USB port” ( v p...

30 Playing an iPod n Setting “Browse Mode” (Operation Mode) In this mode, various lists and screens during playback on iPod are displayed on the TV screen.This section describes the steps up to playing back tracks on iPod in “Browse Mode”. 1 Press iPod/USB to switch the input source to “iPod/ USB”. ...

31 Playing an iPod n Performing repeat playback (Repeat) 1 Press OPTION while in Browse Mode. The option menu screen is displayed. 2 Use ui to select “Repeat”, then press ENTER . OPTION iPod Title Now Playing Artist Album 00:06 100% Previous Option Pause Next Back Option Repeat Random Operation Mode...

32 Playing a USB memory device Playing back music or still picture (JPEG) files recorded on a USB memory device. Important information • Only USB memory devices conforming to mass storage class and MTP (Media Transfer Protocol) standards can be played on this unit. • This unit is compatible with USB...

33 Playing files stored on USB memory devices 1 Connect the USB memory device to the iPod/USB port ( v page 16 ). 2 Press iPod/USB to switch the input source to “iPod/USB”. D&M1D&M2D&M3Music1Music2Music3Music4 OPTION USB [1/9] Option 3 Use ui to select the search item or folder, then pre...

34 Playing a USB memory device n USB memory device operation buttons Operation buttons Function PAGE df Page search INFO Display of information such as the source name, volume, and sound mode name OPTION Text Search / Repeat playback / Random playback / Picture View / Slideshow uio p Cursor operatio...

35 Listening to FM broadcasts For antenna connections, see “Connecting an FM antenna” ( v page 17 ). How to tune in The modes for receiving FM broadcasts consists of “Auto” mode that automatically searches available broadcast stations and “Manual” mode that lets you tune in using buttons to change t...

36 Listening to FM broadcasts n Changing the tuning mode (Tune Mode) You can change the mode for tuning into FM broadcasts. If you cannot tune in automatically with “Auto” mode, then change the mode to “Manual” and tune in manually. 1 Press FM to switch the input source to “FM”. 2 Press OPTION . The...

37 Listening to FM broadcasts n Tuning in by entering the radio frequency (Direct Tune) You can enter the receiving frequency directly to tune in. 1 Press FM to switch the input source to “FM”. 2 Press OPTION . The option menu screen is displayed. 3 Use ui to select “Direct Tune”, then press ENTER ....

38 Listening to FM broadcasts Presetting broadcast stations n Tuning in to radio stations and presetting them automatically (Auto Preset) Up to 56 stations can be preset.If “Auto Preset” is performed after performing “Preset Memory”, the “Preset Memory” settings will be overwritten. 1 Press FM to sw...

39 n Presetting the current broadcast station (Preset Memory) Your favorite broadcast stations can be preset so that you can tune them in easily. Up to 56 stations can be preset. 1 Tune in the broadcast station you want to preset. 2 Press OPTION . The option menu screen is displayed. 3 Use ui to sel...

40 n Specify a name for the preset broadcast station (Preset Name) You can set the name to the preset broadcast station or change it.Up to eight characters can be input. 1 Press FM to switch the input source to “FM”. 2 Press OPTION . The option menu screen is displayed. 3 Use ui to select “Preset Na...

41 n Skipping preset broadcast stations (Preset Skip) You can set in advance, the stations you do not want to be displayed when tuning in, by groups or by stations.The preset skip setting is useful when tuning in, because only your favorite stations are displayed. 1 Press FM to switch the input sour...

42 Cancelling preset skip 1 While the Preset Skip screen is displayed, use o p to select a group containing a broadcast station to cancel the skip for. 2 Use ui to select a broadcast station to cancel the skip for. G TV Screen H CH 3 FM 98.10 MHz CH 2 FM 89.10 MHz CH 1 FM 87.50 MHz Preset Group Set ...

43 Listening to internet radio Internet radio refers to radio broadcasts distributed over the Internet. Internet radio stations from around the world can be received. Important information The broad cast station types and specifications supported by this unit for playback are as follows. G Playable ...

44 Listening to internet radio n Adjusting the sound quality (Restorer) Make this setting at “Restorer” ( v page 83 ) in the menu. You can use the “Restorer” function to restore to a state close to the audio before compression while correcting the bass feel to enjoy a richer playback experience. The...

45 Listening to internet radio n Using vTuner to add Internet radio stations to favorites There are many Internet radio stations in the world, and this unit can tune into these stations. But finding the radio station you want to hear may be difficult, because there are too many stations. If this is ...

46 Playing back files stored on a PC and NAS This unit can play back music files and playlists (m3u, wpl) stored on a PC and on Network Attached Storage (NAS) that supports DLNA. Important information • The network audio playback function of this unit connects to the server using technologies shown ...

47 Playing back files stored on a PC and NAS Applying media sharing settings Here, we apply the settings to share music files stored on a PC and NAS on the network. n Sharing media stored in PC If you are using a media server, be sure to apply this setting first. When using Windows Media Player 12 (...

48 Playing back files stored on a PC and NAS Playing back files stored on a PC and NAS Use this procedure to play music files, image files or playlists. 1 Prepare for playback. q Check the network environment, then turn on this unit’s power ( v page  18 “Connecting to a home network (LAN)”). w If se...

49 Playing back files stored on a PC and NAS Operations available through the OPTION button Press the OPTION button to display a menu of functions that can be used on the TV screen. Select the function you want to use from this menu. You can easily find and use the desired function. n Searching cont...

50 Using online services This unit supports playback of the online services shown below. n About Flickr ( v page 51 ) Flickr is an online photograph sharing service that started in 2004. You can use the this unit to view photographs that have been made public by Flickr users. You do not need an acco...

51 Using online services Viewing photographs on the Flickr site You can view photographs shared by particular users, or all of the photographs shared on Flickr. n Viewing photographs shared by particular users 1 Prepare for playback. q Check the network environment, then turn on this unit’s power ( ...

52 Using online services n Viewing all photographs on Flickr 1 Use ui to select “All Content”, then press ENTER or p . OPTION Flickr [1/2] Add Flickr ContactAll Content Option 2 Use ui to select the folder, and then press ENTER or p . Interestingness Displays photographs that are popular from the nu...

53 Using online services Listening to Pandora 1 Prepare for playback. q Check the network environment, then turn on this unit’s power ( v page  18 “Connecting to a home network (LAN)”). w If settings are required, make the “Settings” ( v page 99 ). e Complete step 4 and obtain a Pandora account. • I...

54 Using online services n Creating an original radio station You can create up to 100 original radio stations. 1 Use ui to select “New Station”, then press ENTER or p . BACK My Station [1/3] Sign out Exit New StationQuick MixD&M1 Radio 2 Input a track or artist name, then press O K . BACK New S...

55 Using online services n Arranging tracks within radio stations You can sort tracks by operating the Pandora menu screen while a track is playing. Press p while a track is playing. The Pandora menu screen is displayed. Menu [1/8] I like this trackI don’t like this trackWhy is this track playing?Cr...

56 Using online services Listening to SiriusXM Satellite Radio Over 120 channels of the SiriusXM programming you love, including commercial-free music plus sports, talk, news and entertainment.Listen anywhere on your computer or smartphone. 1 Prepare for playback. q Check the network environment, th...

57 Using online services n Sign out Disassociate this unit from your SiriusXM account. 1 While the SiriusXM top menu is displayed, press BACK . 2 When the popup menu appears, use o p to select “Yes”, then press ENTER . BACK SiriusXM [1/20] PopRockDance/ElectronicHip-Hop/R&BCountryChirisitanJazz/...

58 Convenient functions Here, we explain how to use convenient functions for NETWORK sources and USB sources. The source names under the titles of each function’s description are sources that allow use of these functions. n Searching content with keywords (Text Search) ( v page 58 ) n Performing rep...

60 Convenient functions Favorites function There are two ways to add content to favorites: q Add to favorites from the Option menu w Add to the FAVORITE STATION button n Add to favorites from the Option menu (Favorites Memory) Internet Radio Media Server You can add up to 100 items as favorites for ...

61 Convenient functions n Deleting content added to favorites (Remove Favorites) 1 Press NETWORK . 2 Use uio p to select “Favorites”, then press ENTER . Favorites Internet Radio Media Server Network 3 Use ui to select the content you want to delete from favorites, then press OPTION . The option menu...

62 AirPlay function Enjoy music from your iTunes library with high quality sound anywhere in your home.Use the Apple Remote app z for iPhone, iPod touch and iPad to control iTunes from any room in your home. z Available as a free download from the App Store. n Streaming music stored in iPhone, iPod ...

63 n Perform iTunes playback operations with the remote control unit of this unit With this unit’s remote control unit, you can perform iTunes song play, pause, and auto search (cue) operations. 1 Select “Edit” – “Preferences...” on the menu. 2 Select “Devices” in the iTunes setting window. 3 Check ...

64 Selecting a listening mode (Sound Mode) This unit allows you to enjoy various kinds of surround and stereo playbacks. Multi-channel audio formats are adopted by many of the contents including Blu-ray disc and DVD as well as digital broadcasting and Internet-delivered movies and music.This unit su...

65 Selecting a listening mode n Listening mode • The following listening modes can be selected using the MOVIE , MUSIC , GAME , and PURE buttons. • Adjust the sound field effect with the menu “Surr.Parameter” ( v page 81 ) to enjoy your favorite sound mode. Operation button Input signal Listening mo...

66 Selecting a listening mode z 1 2-channel also includes analog input. z 2 This mode plays back 2-channel source in 5.1-channel playback. It cannot be selected when headphones are used, or when only front speakers are used. z 3 Some listening modes cannot be selected, depending on the audio format ...

Advanced version 68 F Installation/connection of speakers (Advanced) v page 69 F Playback (Advanced operation) v page 73 F How to make detailed settings v page 76 Advanced version Here, we explain functions and operations that let you make better use of this unit. Basic v ersion A dv anced v ersion ...

69 Procedure for speaker settings Speaker installation Speaker connection ( v page 70 ) Speaker installation • Determine the speaker system depending on the number of speakers you are using and install each speaker and subwoofer in the room. Here, we explain how to install the speakers using a typic...

70 Speaker connection Here, we connect the speakers in the room to this unit.This section explains how to connect them using a typical example. n Connecting 5.1-channel speakers ( v page 71 ) n Connecting 2.1-channel speakers ( v page 72 ) NOTE • Disconnect this unit’s power plug from the power outl...

73 Settings ( v page 20 ) Playback (Basic operation) ( v page 27 ) Selecting a listening mode (Sound Mode) ( v page 64 ) n HDMI control function ( v page 73 ) n Sleep timer function ( v page 74 ) n Quick select function ( v page 75 ) n Various memory functions ( v page 75 ) Playback (Advanced operat...

74 HDMI control function NOTE • When “HDMI Control” is set to “On”, it consumes more standby power. • The HDMI control function controls operations of a TV that is compatible with the HDMI control function. Make sure that the TV and HDMI are connected when you perform HDMI control. • Some functions ...

75 Quick select function You can save settings such as the input source selection, volume level, and sound mode at the QUICK SELECT 1 – 4 buttons. You can simply press one of the set QUICK SELECT buttons for subsequent playback to switch to various saved settings all at once. • By saving frequently ...

76 Menu map For menu operation, connect a TV to this unit and display the menu on the TV screen. For menu operations, see the following page.By default, this unit has recommended settings defined. You can customize this unit based on your existing system and your preferences. How to make detailed se...

77 Examples of menu screen displays Typical examples are described below. G Example 1 H Menu selection screen (Top menu) Surr. Parameter Audio Tone Dialogue Level Subwoofer Level Restorer Audio Delay Volume Audyssey Manual EQ q List of GUI menu setup icons w Currently selected setup item e List of G...

78 Examples of menu and front display Below we describe typical examples of displays on the TV screen and on the set’s display window. Menu display Front display Description Top menu display Setup Menu Audio VideoInputsSpeakersNetworkGeneralSetup Assistant w w Audio q Press SETUP to display the menu...

79 Inputting characters On this unit, you can change the name displayed on the following screens to the names that you prefer. • Text Search ( v page 58 ) • Preset Name ( v page 40 ) • Source Rename ( v page 91 ) • Friendly Name ( v page 98 ) • Quick Sel.Names ( v page 102 ) • Character input for th...

80 Audio Make audio-related settings. Menu operation 1 Press SETUP . The menu is displayed on the TV screen. 2 Use ui to select the menu to be set or operated. 3 Press ENTER or p to enter the setting. • To return to the previous item, press o or BACK . • Exiting the Menu, press SETUP while the menu ...

82 Tone Default settings are underlined. Adjust the tonal quality of the sound. Setting items Setting details Tone Control Set the tone control function to “On” and “Off”. On : Allow tone adjustment (bass, treble). Off : Playback without tone adjustment. “Tone Control” can be set when “Dynamic EQ®” ...

83 Audio Delay Default settings are underlined. While viewing video, manually adjust the time to delay audio output. Setting details 0ms – 200ms • This item can be set within the range of 0 to 100 ms when “Auto Lip Sync” ( v page  87 ) is set to “On” and when a TV compatible with Auto Lip Sync is co...

84 Audio Audyssey Default settings are underlined. Set Audyssey MultEQ®, Audyssey Dynamic EQ® and Audyssey Dynamic Volume®. These can be selected after Audyssey® Setup has been performed. For additional information on Audyssey technology, please see page 117 . NOTE • If you have not performed Auto S...

85 Audio Manual EQ Default settings are underlined. Use the graphic equalizer to adjust the tone of each speaker.“Manual EQ” can be set when “MultEQ®” setting ( v page 84 ) is “Manual EQ”. Setting items Setting details Speaker Select Select whether to adjust tones for individual speakers or for all ...

86 Video Make video-related settings. Menu operation 1 Press SETUP . The menu is displayed on the TV screen. 2 Use ui to select the menu to be set or operated. 3 Press ENTER or p to enter the setting. • To return to the previous item, press o or BACK . • Exiting the Menu, press SETUP while the menu ...

87 Video HDMI Setup Default settings are underlined. Make settings for HDMI video/audio output. Setting items Setting details Auto Lip Sync Make automatic compensation for timing shift in audio and video output. On : Compensated. Off : Not compensated. HDMI Audio Out Select HDMI audio output device....

88 Video Info.Display Default settings are underlined. Displays status of operation temporarily when the sound mode is changed or input source is switched. You can set whether or not to show each of these status displays. Setting items Setting details On-Screen Info On : Turn display on. Off : Turn ...

89 Inputs Perform settings related to input source playback. • You do not have to change the settings to use the unit. Make settings when needed. Menu operation 1 Press SETUP . The menu is displayed on the TV screen. 2 Use ui to select the menu to be set or operated. 3 Press ENTER or p to enter the ...

90 Setting items Setting details DIGITAL Set this to change the digital input connectors assigned to the input sources. CBL/SAT DVD Blu-ray GAME AUX TV AUDIO COAXIAL / OPTICAL : Assign a digital input connector to the selected input source. None : Do not assign a digital input connector to the selec...

91 Source Rename Change the display name of the selected input source.This is convenient when the input source name of your device and the input source name of this unit are different. You can change the name to suit your needs. When the renaming is completed, the name is displayed on this unit’s di...

92 Inputs Setting items Setting details Decode Mode Set the audio decode mode for input source. CBL/SAT DVD Blu-ray GAME AUX TV AUDIO Auto : Detect type of digital input signal and decode and play automatically. PCM : Decode and play only PCM input signals. DTS : Decode and play only DTS input signa...

93 Speakers Set when changing Audyssey® Setup settings. • If you change the speaker settings after performing Audyssey ® Setup, it will not be possible to set Audyssey MultEQ®, Audyssey Dynamic EQ ® and Audyssey Dynamic Volume ® ( v page 84 ). • Can be used without changing the settings. Please set ...

94 Manual Setup Default settings are underlined. Perform when setting the speakers manually or when changing settings made in Audyssey® Setup. • If you change the speaker settings after performing Audyssey® Setup, it will not be possible to select Audyssey MultEQ®, Audyssey Dynamic EQ® and Audyssey ...

97 Network To use this unit by connecting it to a home network (LAN), you must configure network settings.If you set up your home network (LAN) via DHCP, set “DHCP” to “On” (use the default setting). This allows this unit to use your home network (LAN).If you assign an IP address for each device, yo...

98 Information Display network information. Setting details Friendly Name / DHCP=On or Off / IP Address / MAC Address MAC Address is required to make a vTuner account. IP Control Default settings are underlined. Set the network function on/off during standby. Setting details Always On : Network is o...

101 General Make various other settings. Menu operation 1 Press SETUP . The menu is displayed on the TV screen. 2 Use ui to select the menu to be set or operated. 3 Press ENTER or p to enter the setting. • To return to the previous item, press o or BACK . • Exiting the Menu, press SETUP while the me...

102 General Language Default settings are underlined. Set the language for display on the menu screen. Setting details English / Español “Language” can also be set by the following procedure. However, the menu screen is not displayed.Following the display content to make the setting. 1. Press and ho...

103 Information Show information about receiver settings, input signals, etc. Items Setting details Audio Show information about audio input signals. Sound Mode : The currently set surround mode. Signal : The input signal type. Format : The number of input signal channels (presence of front, surroun...

104 Firmware Default settings are underlined. Set whether or not to check for firmware update, update the firmware, and display update and upgrade notifications. Setting items Setting details Update Update the firmware of the receiver. NOTE In cases where it is not possible to connect to the network...

105 General Setting items Setting details Add New Feature Display new features that can be downloaded to this unit and perform an upgrade. NOTE In cases where it is not possible to connect to the network after adding a new function, connect to the network again using “Network” ( v page 97 ). Upgrade...

Information 106 F Part names and functions v page 107 F Other information v page 112 F Troubleshooting v page 119 F Specifications v page 124 F Index v page 125 Information Here, we list various information related to this unit. Please refer to this information as needed. Basic v ersion A dv anced v...

107 Front panel For buttons not explained here, see the page indicated in parentheses ( ). Q1 Q5 Q2 Q3 Q4 y r t e q w o i Q0 u q Power operation button ( X ) ··················································· ( 27 ) Turns power to this unit on and off (standby). w Power indicator ··················...

108 Display r e t y u i o Q0 q w q Information display The input source name, sound mode, setting values and other information are displayed here. w Input signal indicators e MUTE indicator This lights when the mute mode is selected ( v page 28 ). r Master volume indicator t Circle indicator Circle ...

109 Rear panel See the page indicated in parentheses ( ). q w t r e i y u o q FM antenna terminal (ANTENNA) ········································· ( 17 ) w Speaker terminals (SPEAKERS) ······································· ( 71 , 72 ) e Power cord ···············································...

110 Remote control unit For buttons not explained here, see the page indicated in parentheses ( ). ENTER 1 2 3 RC-1169 POWER SLEEP CHANNEL PAGE Blu-ray INTERNET RADIO FM DVD AUX TV AUDIO NETWORK CBL /SAT GAME iPod/USB SOUND MODE PURE MOVIE GAME MUSIC SETUP VOLUME OPTION INFO BACK TUNE FAVORITE STATI...

111 Remote control unit Inserting the batteries q Remove the rear lid in the direction of the arrow and remove it. w Load the two batteries properly as indicated by the marks in the battery compartment. R03/AAA e Put the rear cover back on. NOTE • Insert the specified batteries in the remote control...

112 Other information n Trademark information ( v page 112 ) n Surround ( v page 113 ) n Relationship between video signals and monitor output ( v page 116 ) n Explanation of terms ( v page 117 ) Trademark information This product uses the following technologies (Random order): Manufactured under li...

113 Surround This unit is equipped with a digital signal processing circuit that lets you play program sources in the sound mode to achieve the same sense of presence as in a movie theater. Sound modes and surround parameters This table shows the speakers that can be used in each sound mode and the ...

115 Surround n Types of input signals, and corresponding sound modes This table shows the input signal that can be played in each sound mode. Check the audio signal of the input source then select the sound mode. Symbols in the table F This indicates the default sound mode. S This indicates the sele...

117 Explanation of terms A Adobe RGB color, Adobe YCC601 color The color space defined by Adobe Systems Inc. Because it is a wider color space than RGB, it can produce more vivid and natural images. AirPlay AirPlay sends (plays) contents recorded in iTunes or on an iPhone/iPod touch/iPad to a compat...

119 Troubleshooting If a problem should arise, first check the following:1. Are the connections correct?2. Is the set being operated as described in the owner’s manual?3. Are the other devices operating properly? If this unit does not operate properly, check the items listed in the table below. Shou...

123 Resetting the microprocessor Perform this procedure if the display is abnormal or if operations cannot be performed.When the microprocessor is reset, all the settings are reset to their default values. X SOURCE SELECT 1 SOURCE SELECT 0 1 Turn off the power using X . 2 Press X while simultaneousl...

124 Specifications n Audio section • Power amplifierRated output: Front: 75 W + 75 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.) 120 W + 120 W (6 Ω, 1 kHz with 0.7 % T.H.D.) Center: 75 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.) 120 W (6 Ω, 1 kHz with 0.7 % T.H.D.) Surround: 75 W + 75 W (8 Ω, 20 Hz – 20...

125 v Numerics 2.1-channel ························································· 723D ······································································· 115.1-channel ··················································· 69, 71 v A Accessories ·················································...

127 Dimensions Unit : in. (mm) 11 23/64 (288.5) 12 61/64 (329.0) 7 51/64 (198.0) 1 23/32 (43.5) 1 27/32 (47.0) 19/32 (15.0) 5 23/64 (136.0) 5 15/16 (151.0) 17 3/32 (434.0) 13 35/64 (344.0) 2 23/64 (60.0) 1 49/64 (45.0) 1 49/64 (45.0) 47/64 (18.5) 55/64 (22.0) Weight : 18 lbs 1 oz (8.2 kg) Basic v er...

2 Features With a discrete-circuit configuration, the power amplifier provides identical quality for all 5 channels (120 W x 5ch) The unit is equipped with a power amplifier that reproduces highfidelity sound in sound mode with equal quality and power for all channels, true to the original sound.The...

3 Cautions on handling • Before turning the power on Check once again that all connections are correct and that there are no problems with the connection cables. • Power is supplied to some of the circuitry even when the unit is set to the standby mode. When going on vacation or leaving home for lon...

Basic version 4 F Connections v page 5 F Settings v page 20 F Playback (Basic operation) v page 27 F Selecting a listening mode (Sound Mode) v page 64 Basic version Here, we explain the connections and basic operation methods for this unit. Basic v ersion A dv anced v ersion Infor mation Basic v ers...

5 Important information Make connections before using this unit.To create a home theater that can play back higher quality video and audio by fully utilizing the capabilities of this unit and your video devices, connect this unit to each of your video devices with HDMI cables. n HDMI-compatible devi...

6 Important information Relationship between video signals and monitor output G Flow of video signals H HDMI connector HDMI signal HDMI signal Video signal Video signal Video connector HDMI-compatible TV HDMI-incompatible TV HDMI connector Video connector Video connector HDMI connector HDMI connecto...

7 Connecting an HDMI-compatible device You can connect up to seven HDMI-compatible devices (5-inputs/1-output) to the unit.If the device connected to this unit is equipped with an HDMI connector, it is recommended to use HDMI connections. Connections with an HDMI cable offer the following benefits t...

8 Connecting an HDMI-compatible device n About ARC (Audio Return Channel) function This function plays TV audio on this unit by sending the TV audio signal to this unit via HDMI cable.If a TV without the ARC function is connected via HDMI connections, video signals of the playback device connected t...

9 Connecting an HDMI-compatible device Connecting this unit to a TV via HDMI connections Cables used for connections Audio and video cable (sold separately) HDMI cable (ARC) IN HDMI TV • Video signals are not output if the input video signals do not match the monitor’s resolution. In this case, swit...

10 Connecting an HDMI-compatible device OUT HDMI G Front panel H Digital camcorder • When this unit is connected to other devices with HDMI cables, connect this unit and TV also with an HDMI cable. • When connecting a device that supports Deep Color, please use a “High Speed HDMI cable” or “High Spe...

11 Connecting an HDMI-compatible device n Deep Color ( v page 117 ) When a device supporting Deep Color is connected, use a cable compatible with “High Speed HDMI cable” or “High Speed HDMI cable with Ethernet”. n Auto Lip Sync ( v page 87 , 117 ) n “x.v.Color”, sYCC601 color, Adobe RGB color, Adobe...

12 Connecting an HDMI-incompatible device For high quality video and surround playback, it is recommended to use an HDMI cable to connect this unit to TV and other video devices ( v page 7 “Connecting an HDMI-compatible device”). This section describes connections when your device does not support H...

13 Connecting a TV • This section describes how to connect when your TV does not support HDMI connections.For instructions on HDMI connections, see “Connecting an HDMI-compatible device” ( v page 7 ). • If the TV connected to this unit is equipped with an HDMI connector that supports ARC, digital au...

15 Connecting an HDMI-incompatible device Connecting a DVD player This section describes how to connect when your DVD player does not support HDMI connections.For instructions on HDMI connections, see “Connecting an HDMI-compatible device” ( v page 7 ). n Audio connection The following methods are a...

16 Connecting an iPod or USB memory device to the iPod/USB port • You can enjoy music stored on an iPod or USB memory device. • For operating instructions see “Playing an iPod” ( v page  29 ) or “Playing a USB memory device” ( v page 32 ). Cables used for connections To connect an iPod to this unit,...

17 Connecting an FM antenna • Connect the FM antenna supplied with the unit to enjoy listening to radio broadcasts. • After connecting the antenna and receiving a broadcast signal ( v page  35 “Listening to FM broadcasts”), fix the antenna with tape in a position where the noise level becomes minima...

18 Connecting to a home network (LAN) You can connect this unit to your home network (LAN) to perform various types of playbacks and operations as follows. Make network connections for this unit by carefully reading information on this page. • Playback of network audio such as the Internet radio and...

19 Connecting the power cord After completing all the connections, insert the power plug into the power outlet. To household power outlet (AC 120 V, 60 Hz) Power cord NOTE • Do not plug in the power cord until all connections have been completed. • Do not bundle power cords together with connection ...

20 The acoustic characteristics of the connected speakers and listening room are measured and the optimum settings are made automatically. This is called “Audyssey® Setup”.To perform measurement, place the setup microphone in multiple locations all around the listening area. For best results, we rec...

21 2 Set up the subwoofer If using a subwoofer capable of the following adjustments, set up the subwoofer as shown below. For details, see your subwoofer’s manual. n When using a subwoofer with a direct mode Set the direct mode to “On” and disable the volume adjustment and crossover frequency settin...

22 Detection & Measurement (Main) Set up speakers (Audyssey® Setup) 4 Select “Start” and then press ENTER . The subwoofer volume setting screen is displayed. 5 Select “Next” and then press ENTER . Audyssey Setup MultEQ I f y o u r s u b w o o f e r h a s a v o l u m e c o n t r o l o n i t , p l...

23 Calculation Set up speakers (Audyssey® Setup) 10 Repeat step 9, measuring positions 3 to 6. When measurement of position 6 is completed, a “Measurements Complete.” message is displayed. Audyssey Setup M e a s u r e m e n t s C o m p l e t e . Calculation MultEQ Repeat Last Test 11 Select “Calcula...

24 Set up speakers (Audyssey® Setup) 13 Select “Store” and then press ENTER . Save the measurement results. Audyssey Setup N o w S t o r i n g . . . p l e a s e w a i t . . . MultEQ 75% Audyssey Setup C h e c k p r o c e s s i n g r e s u l t . T o p r o c e e d , s e l e c t “ S t o r e ” . Speaker...

25 Error messages NOTE • An error message is displayed if Audyssey® Setup could not be completed due to speaker placement, the measurement environment, etc. If an error message is displayed, check the relevant items and perform the necessary measures. Then perform Audyssey® Setup again. • If the res...

26 Parameter Check This function enables you to check the measurement results and equalizer characteristics after Audyssey® Setup. 1 Use ui to select “Parameter Check” and then press ENTER . Audyssey Setup Y o u r A V R c a n a u t o m a t i c a l l y m e a s u r e t h e a c o u s t i c s o f y o u ...

27 Playback (Basic operation) Settings ( v page 20 ) n Turning the power on ( v page 27 ) n Selecting the input source ( v page 27 ) n Adjusting the master volume ( v page 28 ) n Turning off the sound temporarily ( v page 28 ) n Playing a Blu-ray Disc player/DVD player ( v page 28 ) n Playing an iPo...

28 Adjusting the master volume Use VOLUME df to adjust the volume. • The volume display method varies depending on the “Scale” setting ( v page 83 ). n When the “Scale” setting ( v page 83 ) is “0 – 98” G Adjustable range H 0.0 0.5 – 98.0 n When the “Scale” setting ( v page 83 ) is “–79.5dB – 18.0dB...

29 Playing an iPod You can use the USB cable provided with the iPod to connect the iPod with the unit’s iPod/USB port and enjoy music stored on the iPod.For information on the iPod models that can be played back with this unit, see “Connecting an iPod or USB memory device to the iPod/USB port” ( v p...

30 Playing an iPod n Setting “Browse Mode” (Operation Mode) In this mode, various lists and screens during playback on iPod are displayed on the TV screen.This section describes the steps up to playing back tracks on iPod in “Browse Mode”. 1 Press iPod/USB to switch the input source to “iPod/ USB”. ...

31 Playing an iPod n Performing repeat playback (Repeat) 1 Press OPTION while in Browse Mode. The option menu screen is displayed. 2 Use ui to select “Repeat”, then press ENTER . OPTION iPod Title Now Playing Artist Album 00:06 100% Previous Option Pause Next Back Option Repeat Random Operation Mode...

32 Playing a USB memory device Playing back music or still picture (JPEG) files recorded on a USB memory device. Important information • Only USB memory devices conforming to mass storage class and MTP (Media Transfer Protocol) standards can be played on this unit. • This unit is compatible with USB...

33 Playing files stored on USB memory devices 1 Connect the USB memory device to the iPod/USB port ( v page 16 ). 2 Press iPod/USB to switch the input source to “iPod/USB”. D&M1D&M2D&M3Music1Music2Music3Music4 OPTION USB [1/9] Option 3 Use ui to select the search item or folder, then pre...

34 Playing a USB memory device n USB memory device operation buttons Operation buttons Function PAGE df Page search INFO Display of information such as the source name, volume, and sound mode name OPTION Text Search / Repeat playback / Random playback / Picture View / Slideshow uio p Cursor operatio...

35 Listening to FM broadcasts For antenna connections, see “Connecting an FM antenna” ( v page 17 ). How to tune in The modes for receiving FM broadcasts consists of “Auto” mode that automatically searches available broadcast stations and “Manual” mode that lets you tune in using buttons to change t...

36 Listening to FM broadcasts n Changing the tuning mode (Tune Mode) You can change the mode for tuning into FM broadcasts. If you cannot tune in automatically with “Auto” mode, then change the mode to “Manual” and tune in manually. 1 Press FM to switch the input source to “FM”. 2 Press OPTION . The...

37 Listening to FM broadcasts n Tuning in by entering the radio frequency (Direct Tune) You can enter the receiving frequency directly to tune in. 1 Press FM to switch the input source to “FM”. 2 Press OPTION . The option menu screen is displayed. 3 Use ui to select “Direct Tune”, then press ENTER ....

38 Listening to FM broadcasts Presetting broadcast stations n Tuning in to radio stations and presetting them automatically (Auto Preset) Up to 56 stations can be preset.If “Auto Preset” is performed after performing “Preset Memory”, the “Preset Memory” settings will be overwritten. 1 Press FM to sw...

39 n Presetting the current broadcast station (Preset Memory) Your favorite broadcast stations can be preset so that you can tune them in easily. Up to 56 stations can be preset. 1 Tune in the broadcast station you want to preset. 2 Press OPTION . The option menu screen is displayed. 3 Use ui to sel...

40 n Specify a name for the preset broadcast station (Preset Name) You can set the name to the preset broadcast station or change it.Up to eight characters can be input. 1 Press FM to switch the input source to “FM”. 2 Press OPTION . The option menu screen is displayed. 3 Use ui to select “Preset Na...

41 n Skipping preset broadcast stations (Preset Skip) You can set in advance, the stations you do not want to be displayed when tuning in, by groups or by stations.The preset skip setting is useful when tuning in, because only your favorite stations are displayed. 1 Press FM to switch the input sour...

42 Cancelling preset skip 1 While the Preset Skip screen is displayed, use o p to select a group containing a broadcast station to cancel the skip for. 2 Use ui to select a broadcast station to cancel the skip for. G TV Screen H CH 3 FM 98.10 MHz CH 2 FM 89.10 MHz CH 1 FM 87.50 MHz Preset Group Set ...

43 Listening to internet radio Internet radio refers to radio broadcasts distributed over the Internet. Internet radio stations from around the world can be received. Important information The broad cast station types and specifications supported by this unit for playback are as follows. G Playable ...

44 Listening to internet radio n Adjusting the sound quality (Restorer) Make this setting at “Restorer” ( v page 83 ) in the menu. You can use the “Restorer” function to restore to a state close to the audio before compression while correcting the bass feel to enjoy a richer playback experience. The...

45 Listening to internet radio n Using vTuner to add Internet radio stations to favorites There are many Internet radio stations in the world, and this unit can tune into these stations. But finding the radio station you want to hear may be difficult, because there are too many stations. If this is ...

46 Playing back files stored on a PC and NAS This unit can play back music files and playlists (m3u, wpl) stored on a PC and on Network Attached Storage (NAS) that supports DLNA. Important information • The network audio playback function of this unit connects to the server using technologies shown ...

47 Playing back files stored on a PC and NAS Applying media sharing settings Here, we apply the settings to share music files stored on a PC and NAS on the network. n Sharing media stored in PC If you are using a media server, be sure to apply this setting first. When using Windows Media Player 12 (...

48 Playing back files stored on a PC and NAS Playing back files stored on a PC and NAS Use this procedure to play music files, image files or playlists. 1 Prepare for playback. q Check the network environment, then turn on this unit’s power ( v page  18 “Connecting to a home network (LAN)”). w If se...

49 Playing back files stored on a PC and NAS Operations available through the OPTION button Press the OPTION button to display a menu of functions that can be used on the TV screen. Select the function you want to use from this menu. You can easily find and use the desired function. n Searching cont...

50 Using online services This unit supports playback of the online services shown below. n About Flickr ( v page 51 ) Flickr is an online photograph sharing service that started in 2004. You can use the this unit to view photographs that have been made public by Flickr users. You do not need an acco...

51 Using online services Viewing photographs on the Flickr site You can view photographs shared by particular users, or all of the photographs shared on Flickr. n Viewing photographs shared by particular users 1 Prepare for playback. q Check the network environment, then turn on this unit’s power ( ...

52 Using online services n Viewing all photographs on Flickr 1 Use ui to select “All Content”, then press ENTER or p . OPTION Flickr [1/2] Add Flickr ContactAll Content Option 2 Use ui to select the folder, and then press ENTER or p . Interestingness Displays photographs that are popular from the nu...

53 Using online services Listening to Pandora 1 Prepare for playback. q Check the network environment, then turn on this unit’s power ( v page  18 “Connecting to a home network (LAN)”). w If settings are required, make the “Settings” ( v page 99 ). e Complete step 4 and obtain a Pandora account. • I...

54 Using online services n Creating an original radio station You can create up to 100 original radio stations. 1 Use ui to select “New Station”, then press ENTER or p . BACK My Station [1/3] Sign out Exit New StationQuick MixD&M1 Radio 2 Input a track or artist name, then press O K . BACK New S...

55 Using online services n Arranging tracks within radio stations You can sort tracks by operating the Pandora menu screen while a track is playing. Press p while a track is playing. The Pandora menu screen is displayed. Menu [1/8] I like this trackI don’t like this trackWhy is this track playing?Cr...

56 Using online services Listening to SiriusXM Satellite Radio Over 120 channels of the SiriusXM programming you love, including commercial-free music plus sports, talk, news and entertainment.Listen anywhere on your computer or smartphone. 1 Prepare for playback. q Check the network environment, th...

57 Using online services n Sign out Disassociate this unit from your SiriusXM account. 1 While the SiriusXM top menu is displayed, press BACK . 2 When the popup menu appears, use o p to select “Yes”, then press ENTER . BACK SiriusXM [1/20] PopRockDance/ElectronicHip-Hop/R&BCountryChirisitanJazz/...

58 Convenient functions Here, we explain how to use convenient functions for NETWORK sources and USB sources. The source names under the titles of each function’s description are sources that allow use of these functions. n Searching content with keywords (Text Search) ( v page 58 ) n Performing rep...

60 Convenient functions Favorites function There are two ways to add content to favorites: q Add to favorites from the Option menu w Add to the FAVORITE STATION button n Add to favorites from the Option menu (Favorites Memory) Internet Radio Media Server You can add up to 100 items as favorites for ...

61 Convenient functions n Deleting content added to favorites (Remove Favorites) 1 Press NETWORK . 2 Use uio p to select “Favorites”, then press ENTER . Favorites Internet Radio Media Server Network 3 Use ui to select the content you want to delete from favorites, then press OPTION . The option menu...

62 AirPlay function Enjoy music from your iTunes library with high quality sound anywhere in your home.Use the Apple Remote app z for iPhone, iPod touch and iPad to control iTunes from any room in your home. z Available as a free download from the App Store. n Streaming music stored in iPhone, iPod ...

63 n Perform iTunes playback operations with the remote control unit of this unit With this unit’s remote control unit, you can perform iTunes song play, pause, and auto search (cue) operations. 1 Select “Edit” – “Preferences...” on the menu. 2 Select “Devices” in the iTunes setting window. 3 Check ...

64 Selecting a listening mode (Sound Mode) This unit allows you to enjoy various kinds of surround and stereo playbacks. Multi-channel audio formats are adopted by many of the contents including Blu-ray disc and DVD as well as digital broadcasting and Internet-delivered movies and music.This unit su...

65 Selecting a listening mode n Listening mode • The following listening modes can be selected using the MOVIE , MUSIC , GAME , and PURE buttons. • Adjust the sound field effect with the menu “Surr.Parameter” ( v page 81 ) to enjoy your favorite sound mode. Operation button Input signal Listening mo...

66 Selecting a listening mode z 1 2-channel also includes analog input. z 2 This mode plays back 2-channel source in 5.1-channel playback. It cannot be selected when headphones are used, or when only front speakers are used. z 3 Some listening modes cannot be selected, depending on the audio format ...

Advanced version 68 F Installation/connection of speakers (Advanced) v page 69 F Playback (Advanced operation) v page 73 F How to make detailed settings v page 76 Advanced version Here, we explain functions and operations that let you make better use of this unit. Basic v ersion A dv anced v ersion ...

69 Procedure for speaker settings Speaker installation Speaker connection ( v page 70 ) Speaker installation • Determine the speaker system depending on the number of speakers you are using and install each speaker and subwoofer in the room. Here, we explain how to install the speakers using a typic...

70 Speaker connection Here, we connect the speakers in the room to this unit.This section explains how to connect them using a typical example. n Connecting 5.1-channel speakers ( v page 71 ) n Connecting 2.1-channel speakers ( v page 72 ) NOTE • Disconnect this unit’s power plug from the power outl...

73 Settings ( v page 20 ) Playback (Basic operation) ( v page 27 ) Selecting a listening mode (Sound Mode) ( v page 64 ) n HDMI control function ( v page 73 ) n Sleep timer function ( v page 74 ) n Quick select function ( v page 75 ) n Various memory functions ( v page 75 ) Playback (Advanced operat...

74 HDMI control function NOTE • When “HDMI Control” is set to “On”, it consumes more standby power. • The HDMI control function controls operations of a TV that is compatible with the HDMI control function. Make sure that the TV and HDMI are connected when you perform HDMI control. • Some functions ...

75 Quick select function You can save settings such as the input source selection, volume level, and sound mode at the QUICK SELECT 1 – 4 buttons. You can simply press one of the set QUICK SELECT buttons for subsequent playback to switch to various saved settings all at once. • By saving frequently ...

76 Menu map For menu operation, connect a TV to this unit and display the menu on the TV screen. For menu operations, see the following page.By default, this unit has recommended settings defined. You can customize this unit based on your existing system and your preferences. How to make detailed se...

77 Examples of menu screen displays Typical examples are described below. G Example 1 H Menu selection screen (Top menu) Surr. Parameter Audio Tone Dialogue Level Subwoofer Level Restorer Audio Delay Volume Audyssey Manual EQ q List of GUI menu setup icons w Currently selected setup item e List of G...

78 Examples of menu and front display Below we describe typical examples of displays on the TV screen and on the set’s display window. Menu display Front display Description Top menu display Setup Menu Audio VideoInputsSpeakersNetworkGeneralSetup Assistant w w Audio q Press SETUP to display the menu...

79 Inputting characters On this unit, you can change the name displayed on the following screens to the names that you prefer. • Text Search ( v page 58 ) • Preset Name ( v page 40 ) • Source Rename ( v page 91 ) • Friendly Name ( v page 98 ) • Quick Sel.Names ( v page 102 ) • Character input for th...

80 Audio Make audio-related settings. Menu operation 1 Press SETUP . The menu is displayed on the TV screen. 2 Use ui to select the menu to be set or operated. 3 Press ENTER or p to enter the setting. • To return to the previous item, press o or BACK . • Exiting the Menu, press SETUP while the menu ...

82 Tone Default settings are underlined. Adjust the tonal quality of the sound. Setting items Setting details Tone Control Set the tone control function to “On” and “Off”. On : Allow tone adjustment (bass, treble). Off : Playback without tone adjustment. “Tone Control” can be set when “Dynamic EQ®” ...

83 Audio Delay Default settings are underlined. While viewing video, manually adjust the time to delay audio output. Setting details 0ms – 200ms • This item can be set within the range of 0 to 100 ms when “Auto Lip Sync” ( v page  87 ) is set to “On” and when a TV compatible with Auto Lip Sync is co...

84 Audio Audyssey Default settings are underlined. Set Audyssey MultEQ®, Audyssey Dynamic EQ® and Audyssey Dynamic Volume®. These can be selected after Audyssey® Setup has been performed. For additional information on Audyssey technology, please see page 117 . NOTE • If you have not performed Auto S...

85 Audio Manual EQ Default settings are underlined. Use the graphic equalizer to adjust the tone of each speaker.“Manual EQ” can be set when “MultEQ®” setting ( v page 84 ) is “Manual EQ”. Setting items Setting details Speaker Select Select whether to adjust tones for individual speakers or for all ...

86 Video Make video-related settings. Menu operation 1 Press SETUP . The menu is displayed on the TV screen. 2 Use ui to select the menu to be set or operated. 3 Press ENTER or p to enter the setting. • To return to the previous item, press o or BACK . • Exiting the Menu, press SETUP while the menu ...

87 Video HDMI Setup Default settings are underlined. Make settings for HDMI video/audio output. Setting items Setting details Auto Lip Sync Make automatic compensation for timing shift in audio and video output. On : Compensated. Off : Not compensated. HDMI Audio Out Select HDMI audio output device....

88 Video Info.Display Default settings are underlined. Displays status of operation temporarily when the sound mode is changed or input source is switched. You can set whether or not to show each of these status displays. Setting items Setting details On-Screen Info On : Turn display on. Off : Turn ...

89 Inputs Perform settings related to input source playback. • You do not have to change the settings to use the unit. Make settings when needed. Menu operation 1 Press SETUP . The menu is displayed on the TV screen. 2 Use ui to select the menu to be set or operated. 3 Press ENTER or p to enter the ...

90 Setting items Setting details DIGITAL Set this to change the digital input connectors assigned to the input sources. CBL/SAT DVD Blu-ray GAME AUX TV AUDIO COAXIAL / OPTICAL : Assign a digital input connector to the selected input source. None : Do not assign a digital input connector to the selec...

91 Source Rename Change the display name of the selected input source.This is convenient when the input source name of your device and the input source name of this unit are different. You can change the name to suit your needs. When the renaming is completed, the name is displayed on this unit’s di...

92 Inputs Setting items Setting details Decode Mode Set the audio decode mode for input source. CBL/SAT DVD Blu-ray GAME AUX TV AUDIO Auto : Detect type of digital input signal and decode and play automatically. PCM : Decode and play only PCM input signals. DTS : Decode and play only DTS input signa...

93 Speakers Set when changing Audyssey® Setup settings. • If you change the speaker settings after performing Audyssey ® Setup, it will not be possible to set Audyssey MultEQ®, Audyssey Dynamic EQ ® and Audyssey Dynamic Volume ® ( v page 84 ). • Can be used without changing the settings. Please set ...

94 Manual Setup Default settings are underlined. Perform when setting the speakers manually or when changing settings made in Audyssey® Setup. • If you change the speaker settings after performing Audyssey® Setup, it will not be possible to select Audyssey MultEQ®, Audyssey Dynamic EQ® and Audyssey ...

97 Network To use this unit by connecting it to a home network (LAN), you must configure network settings.If you set up your home network (LAN) via DHCP, set “DHCP” to “On” (use the default setting). This allows this unit to use your home network (LAN).If you assign an IP address for each device, yo...

98 Information Display network information. Setting details Friendly Name / DHCP=On or Off / IP Address / MAC Address MAC Address is required to make a vTuner account. IP Control Default settings are underlined. Set the network function on/off during standby. Setting details Always On : Network is o...

101 General Make various other settings. Menu operation 1 Press SETUP . The menu is displayed on the TV screen. 2 Use ui to select the menu to be set or operated. 3 Press ENTER or p to enter the setting. • To return to the previous item, press o or BACK . • Exiting the Menu, press SETUP while the me...

102 General Language Default settings are underlined. Set the language for display on the menu screen. Setting details English / Español “Language” can also be set by the following procedure. However, the menu screen is not displayed.Following the display content to make the setting. 1. Press and ho...

103 Information Show information about receiver settings, input signals, etc. Items Setting details Audio Show information about audio input signals. Sound Mode : The currently set surround mode. Signal : The input signal type. Format : The number of input signal channels (presence of front, surroun...

104 Firmware Default settings are underlined. Set whether or not to check for firmware update, update the firmware, and display update and upgrade notifications. Setting items Setting details Update Update the firmware of the receiver. NOTE In cases where it is not possible to connect to the network...

105 General Setting items Setting details Add New Feature Display new features that can be downloaded to this unit and perform an upgrade. NOTE In cases where it is not possible to connect to the network after adding a new function, connect to the network again using “Network” ( v page 97 ). Upgrade...

Information 106 F Part names and functions v page 107 F Other information v page 112 F Troubleshooting v page 119 F Specifications v page 124 F Index v page 125 Information Here, we list various information related to this unit. Please refer to this information as needed. Basic v ersion A dv anced v...

107 Front panel For buttons not explained here, see the page indicated in parentheses ( ). Q1 Q5 Q2 Q3 Q4 y r t e q w o i Q0 u q Power operation button ( X ) ··················································· ( 27 ) Turns power to this unit on and off (standby). w Power indicator ··················...

108 Display r e t y u i o Q0 q w q Information display The input source name, sound mode, setting values and other information are displayed here. w Input signal indicators e MUTE indicator This lights when the mute mode is selected ( v page 28 ). r Master volume indicator t Circle indicator Circle ...

109 Rear panel See the page indicated in parentheses ( ). q w t r e i y u o q FM antenna terminal (ANTENNA) ········································· ( 17 ) w Speaker terminals (SPEAKERS) ······································· ( 71 , 72 ) e Power cord ···············································...

110 Remote control unit For buttons not explained here, see the page indicated in parentheses ( ). ENTER 1 2 3 RC-1169 POWER SLEEP CHANNEL PAGE Blu-ray INTERNET RADIO FM DVD AUX TV AUDIO NETWORK CBL /SAT GAME iPod/USB SOUND MODE PURE MOVIE GAME MUSIC SETUP VOLUME OPTION INFO BACK TUNE FAVORITE STATI...

111 Remote control unit Inserting the batteries q Remove the rear lid in the direction of the arrow and remove it. w Load the two batteries properly as indicated by the marks in the battery compartment. R03/AAA e Put the rear cover back on. NOTE • Insert the specified batteries in the remote control...

112 Other information n Trademark information ( v page 112 ) n Surround ( v page 113 ) n Relationship between video signals and monitor output ( v page 116 ) n Explanation of terms ( v page 117 ) Trademark information This product uses the following technologies (Random order): Manufactured under li...

113 Surround This unit is equipped with a digital signal processing circuit that lets you play program sources in the sound mode to achieve the same sense of presence as in a movie theater. Sound modes and surround parameters This table shows the speakers that can be used in each sound mode and the ...

115 Surround n Types of input signals, and corresponding sound modes This table shows the input signal that can be played in each sound mode. Check the audio signal of the input source then select the sound mode. Symbols in the table F This indicates the default sound mode. S This indicates the sele...

117 Explanation of terms A Adobe RGB color, Adobe YCC601 color The color space defined by Adobe Systems Inc. Because it is a wider color space than RGB, it can produce more vivid and natural images. AirPlay AirPlay sends (plays) contents recorded in iTunes or on an iPhone/iPod touch/iPad to a compat...

119 Troubleshooting If a problem should arise, first check the following:1. Are the connections correct?2. Is the set being operated as described in the owner’s manual?3. Are the other devices operating properly? If this unit does not operate properly, check the items listed in the table below. Shou...

123 Resetting the microprocessor Perform this procedure if the display is abnormal or if operations cannot be performed.When the microprocessor is reset, all the settings are reset to their default values. X SOURCE SELECT 1 SOURCE SELECT 0 1 Turn off the power using X . 2 Press X while simultaneousl...

124 Specifications n Audio section • Power amplifierRated output: Front: 75 W + 75 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.) 120 W + 120 W (6 Ω, 1 kHz with 0.7 % T.H.D.) Center: 75 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.) 120 W (6 Ω, 1 kHz with 0.7 % T.H.D.) Surround: 75 W + 75 W (8 Ω, 20 Hz – 20...

125 v Numerics 2.1-channel ························································· 723D ······································································· 115.1-channel ··················································· 69, 71 v A Accessories ·················································...

127 Dimensions Unit : in. (mm) 11 23/64 (288.5) 12 61/64 (329.0) 7 51/64 (198.0) 1 23/32 (43.5) 1 27/32 (47.0) 19/32 (15.0) 5 23/64 (136.0) 5 15/16 (151.0) 17 3/32 (434.0) 13 35/64 (344.0) 2 23/64 (60.0) 1 49/64 (45.0) 1 49/64 (45.0) 47/64 (18.5) 55/64 (22.0) Weight : 18 lbs 1 oz (8.2 kg) Basic v er...