Page 2 - Electrical connection.
Page 2 • Never operate the extractor hood without a grease filter. • Never leave cooking fat or oil unat-tended. Overheated fat or oil can easily catch fire. • Do not flambé food directly under the ex-tractor hood. The flames pose the risk of the grease filter catching fire. (see page 7 under mainte...
Page 3 - Preparing for installation.; Connecting a 150 mm diameter pipe:; Attach a reducing connec-; Recirculating filtered air.; Recirculate; ceiling; The extractor hood has the ability to:
Page 3 Preparing for installation. 2 Venting air to the outside. When discharging the air into a ventila-tion shaft or directly through the wall into the open , please take note of the fol-lowing: • Exhaust air from the extractor hood must not be directed into a flue or chimney which is used for exh...
Page 4 - ble; Step 2; CEILING
Page 4 Installation. Note:The extractor hood is intended to hang from a horizontal ceiling capable of supporting the weight of the hood. (approximately 40 kg) Step 1 • Carefully unpack the extractor hood and component parts. • With the assistance of a qualified in-staller, mount the top extension ad...
Page 5 - Optional Carbon pad filters.; Engage the filter and release the catch.
Page 5 Optional Carbon pad filters. • Remove the plastic outer protective lin-ing on the grease filters before fitting them to the extractor hood. • To fit the filters, engage the two lugs at the rear of each filter into the rectangular slots of the extractor hood frame, lift the filter and press th...
Page 6 - Replacing the light bulbs.; Glass cover
Page 6 Replacing the light bulbs. Glass cover Retaining ring Housing Light bulb • Switch off the electricity supply. • If the bulb has recently failed, it might still be very hot. Allow the glass cover to cool before attempting to re-place the bulb. • Hold the glass cover and unclip the re-taining r...
Page 7 - Maintenance and cleaning.; Cleaning procedure
Page 7 Maintenance and cleaning. Important: Before cleaning any part of the hood, switch the power off at the mains. Cleaning the metal grease filters. • In normal operation (1 to 2 hours daily), the metal grease filters must be cleaned every 8 to 10 weeks. • The filters may washed in a dish-washer,...
Page 8 - Have the filters been cleaned?; Owner’s responsibility.; Other areas are serviced by over 200
Page 8 Problem check. Before calling a service technician to as-sist with a problem please check: • The main distribution board. See if a circuit breaker has tripped or a fuse has blown. • The wall socket. • Have the filters been cleaned? • Is the chimney blocked? Remember that you may be charged fo...
Page 9 - within the provisions of Point 1 of this Certificate.; KEEP THIS CERTIFICATE AND SALES INVOICE AS PROOF OF PURCHASE FOR
Page 9 This certificate is issued by DEFY APPLIANCES LIMITED manufacturers of Defy and Ocean products, hereinafter the Company, to the original purchaser only, of the appliance described on the certificate and shall constitute the only warranty given in respect of this appliance. The Company warrant...