Defy 850 - Manuals - manualsarea.com

Page 3 - SAFETY PRECAUTIONS

SAFETY PRECAUTIONS Do not reach inside the tub while the machine is working. Wait until all motion stops. Before washing, check all clothes for loose buttons and tears. Check pockets for coins, pins or other small articles. Close zips and fasteners. Wash small articles inside a pillow slip. Do not w...

Page 4 - INSTALLATION; UNPACKING; Remove all packaging and dispose of it in a responsible manner.; POSITIONING; Drain hose Hose clamp

INSTALLATION UNPACKING • Remove all packaging and dispose of it in a responsible manner. • Open the wash-tub lid and remove all the accessories stored in the drum. • Do not attempt to operate the machine while any of the packaging is still in place. POSITIONING • The machine should be installed in a...

Page 5 - INSTALLATION - CONTINUED; INLET HOSES

INSTALLATION - CONTINUED INLET HOSES • Connect the respective inlet hoses to the hot and cold water taps and to the machine’s inlet fittings. (see sketches below). The hot water inlet is on the left and the cold water inlet on the right. CONVENTIONAL TAPS 1 Pull down the collar of the inlet valve to...

Page 6 - PREPARATION

ELECTRICAL INSTALLATION • The washing machine is designed to operate on a 230 Volt, 50 Hz, 15 Amp, AC power supply. • The machine should be connected to an earthed 3 pin wall socket. • If the power-cord should ever need replacing, use only a genuine cord available from the nearest Defy Service Centr...

Page 7 - FUNCTIONS OF THE CONTROLS; Press this pad to turn the power on or off.; WASH; CYCLE; START; MODE

FUNCTIONS OF THE CONTROLS WASH TEMP. DETERGENT HOT COLD HIGH MED. LOW SMALL FUZZY HEAVY ECONOMY WOOL REMAIN TIME MIN. WASH RINSE SPIN CONTROL SPIN ONLY START HOLD POWER WASH TEMP SOAK WATER LEVEL CYCLE DELAY MODE ON / OFF F U Z Z Y P O W E R Press this pad to turn the power on or off. WASH TEMP Pres...

Page 8 - PROGRAMME SELECTION; FUZZY LOGIC PROGRAMME; HEAVY PROGRAMME; ECONOMY PROGRAMME; Select water level and temp.; WOOL PROGRAMME; SOAK PROGRAMME; Use this programme for blue jeans, overalls and heavy duty wear.; Select water level and temp.

PROGRAMME SELECTION FUZZY LOGIC PROGRAMME This machine has Fuzzy Logic sensors. These enable it to evaluate each load placed in the drum and to select and modify a wash programme to suit the load. Do not use the FUZZY programme for woollen or delicate garments. POWER START HOLD To select Fuzzy, simp...

Page 9 - TIME DELAYED START; Press the POWER ON pad.; Display; DELAY; Set to 8

REMAIN TIME DELAYED START The wash cycle completion time may be delayed by 2 to 48 hours. This feature is particularly useful when you are at work and only want the machine to finish washing just before you arrive home. To cancel the “time Delayed Start” press the power button. Wait five seconds bef...

Page 10 - CONVENIENT SPIN ONLY SELECTION; BEFORE ANY OF THE WASH OPTIONS ARE SELECTED YOU MUST FIRST:; Insert the power plug into an earthed wall socket and switch on.; NOTE: DO NOT OPEN THE HOT WATER TAP BY ITSELF.

CONVENIENT SPIN ONLY SELECTION Press the POWER ON pad. Press the CONTROL pad. Press the START HOLD pad. BEFORE ANY OF THE WASH OPTIONS ARE SELECTED YOU MUST FIRST: • Insert the power plug into an earthed wall socket and switch on. • Open the hot and cold water taps. • Load the washing into the machi...

Page 11 - OPERATING PROCEDURE; LOADING DETERGENT; Gently pull the detergent drawer open.; ADDING BLEACH

OPERATING PROCEDURE LOADING DETERGENT • Only use detergents specifically designed for top loading automatic washing machines. • Gently pull the detergent drawer open. • Pour the detergent, the quantity of which is dependent on the wash load, into the detergent drawer and close the drawer. ADDING BLE...

Page 12 - MAINTENANCE; CLEANING THE EXTERIOR; CLEANING THE LINT FILTER; CLEANING THE WATER INLET FILTER

MAINTENANCE CLEANING THE EXTERIOR • Wipe up any detergent, bleach and other spills as they occur with a soft damp cloth. • Periodically clean the cabinet with a damp warm soapy cloth, rinse and dry. CLEANING THE interior • Clean the interior with 250ml of chlorine bleach mixed with 500ml of detergen...

Page 14 - TROUBLE SHOOTING; will be displayed

TROUBLE SHOOTING Most problems are easily solved if the cause is known. BEFORE CALLING A SERVICE TECHNICIAN PLEASE CHECK THE FOLLOWING: PROBLEM CHECK The machine will not operate at all. Is there a power failure? Has the power pad been pressed? Has the start / hold pad been pressed? Is there water i...