Page 2 - C without delaminating or discolouring.; ELECTRICAL INSTALLATION; Connection to the power supply
INTRODUCTION Congratulations on the purchase of this quality product. We trust that you will enjoy many years of trouble free use. Please read these instructions carefully before using the oven. This manual will provide you with information on how to operate and care for your product in order that y...
Page 3 - INSTALLATION; Insert the oven into the cupboard.
INSTALLATION • Insert the oven into the cupboard. • Open the door to expose the fixing holes in the side trims. • Secure the oven by 4 countersunk screws (fasteners are not supplied). 590 Aperture Typical section showing ventilation requirements 565 900 Above floorlevel Floor 60 + _ 3 0 + _ 3 0 + _3...
Page 4 - THE CONTROL PANEL; AUTOMATIC OVEN TIMER / CLOCK; Setting the time of day
THE CONTROL PANEL STOP 1 2:4 5 SLIMLINE 600 E THERMOFAN AUTOMATIC OVEN TIMER AND CLOCK MULTIFUNCTION OVEN THERMOSTAT AND INDICATOR LIGHT MULTIFUNCTIONSELECTOR THE OVEN THERMOSTAT IS MARKED TO 70°C. WHEN SET TO THIS POSITION, THE OVEN MAY BE USED AS A WARMER AUTOMATIC OVEN TIMER / CLOCK BUTTON FUNCTI...
Page 6 - Press button 4
Switching the oven off automatically Suppose you have to go out and you will not be back in time to switch off a meal already cooking in the oven and requiring another 40 minutes before it is done. Proceed as follows: • Press and hold button 2 . The clock will display 00.00 . • Press button 6 until ...
Page 7 - CONVENTIONAL OVEN
MULTIFUNCTION OVEN The fan blows ambient air over the frozen food todefrost it. Top heat and bottom bakeelements are used. Top heat and bottom bakeelements are used in conjunction with the fan. The rear bake element isused in conjunction withthe fan. The top grill element isused in conjunction witht...
Page 8 - THERMOFAN OVEN
3 CONVENTIONAL OVEN (FAN ASSISTED) • Set the multifunction selector to conventional oven fan assisted and the oven thermostat to the required temperature. The indicator light will glow and remain on until the oven has reached the selected temperature. • No preheating is necessary and the food can be...
Page 9 - TURBO GRILLING
Recommended shelf positions 1 2 3 4 Position 4 = T/fan baking Position 2 = T/Fan roasting / baking Position 1 = T/Fan roasting (large) Baking guide • Thermofan baking is done with the oven trays in position. • For small items the entire area of each tray may be utilised. Larger items should be place...
Page 10 - CONVENTIONAL GRILLING; The oven door must remain closed when grilling.; PRECAUTIONS; Only use the appliance for preparing food.; oven is switched off
6 CONVENTIONAL GRILLING • The oven door must remain closed when grilling. • Use only a wire shelf when grilling as the intense heat could warp the baking tray. • Set the multifunction knob to conventional grill. • Set the oven thermostat to the grill position. • Operating instructions are otherwise ...
Page 11 - MAINTENANCE; Removing the inner door glass
MAINTENANCE Lift-off oven door The oven door may be removed to improve oven access during cleaning Grasp the open door on both sides near the hinges Flip the retainer clasps up and over the hook on the upper hinge arm. Maintain upward pressure on the door to prevent the clasps from disengaging Lift ...
Page 12 - CLEANING
Oven light The oven light is switched on by the multifunction selector switch and switches off when the knob is returned to 0 . To replace a faulty light bulb, proceed as follows. • Switch off the power at the wall switch to avoid the possibility of electric shock. • Remove the light cover by unscre...
Page 13 - CARE GUIDE FOR STAINLESS STEEL; DO NOT USE
CARE GUIDE FOR STAINLESS STEEL Stainless steel is not adversely affected by normal household use but because of it’s reputation for durability, it is sometimes assumed to be indestructible, and therefore subjected to misuse or even abuse. Care should be taken to avoid such ‘abnormal use’. Cleaning m...
Page 15 - PROBLEM CHECK; Before calling a service technician to assist with a problem,; OWNER’S RESPONSIBILITY; Damage to exterior finish.
PROBLEM CHECK Before calling a service technician to assist with a problem, PLEASE CHECK THE FOLLOWING The main distribution board. The wall switch. Check that “Key lock” on the timer is not activated (see page 6) Ensure that the timer is set to manual. (Press button 4 on the timer) Should your time...