Defy 600 EMBW - Manuals - manualsarea.com

Page 2 - C without delaminating or discolouring.; Connection to the power supply; A means for disconnection must be provided in the fixed wiring.; Electrical installation; dealer, who will take the necessary corrective action.

2 Conventional Ringer timer Warming Safety advice Solid plates Maintenance Cleaning Care guide for Stainless Problem Owners Service Service Warranty Features Page 2 2 2 2 3 3 4 4 5 5 5 6 6 7 8 8 8 8 9 10 11 12 13 15 15 15 16 17 20 Congratulations on the purchase of this quality product. We trust tha...

Page 3 - Eye level installation; Insert the oven into the cupboard.; Hob installation

3 Eye level installation models 600 STE, 600 EMBW, • Insert the oven into the cupboard. • Open the door to expose the fixing holes in the side trims. • Secure the oven by 4 countersunk screws (fasteners are not supplied ). (A) Aperture Typical section showing ventilation requirements 565 (B) Above f...

Page 4 - Installation for model 600; sides and the underside of the worktop; The control panel

4 Under - counter Installation for model 600 Worktop 32mm - 48mm thick Vent gap at front only 100 590 Aperture (210) Floor Datum 900 565 Aperture Top filler piece Typical section showing ventilation requirements Aperture 590 H x 565 W x 570 D 6 + _ 3 0 + _ 3 0 + _ 3 0 • Note: The oven cavity must ve...

Page 6 - Thermofan oven

6 4 Thermofan oven Cooking • Set the multifunction selector to Thermofan oven and the oven thermostat to the re- quired temperature. • The indicator light will glow and remain on until the oven has reached the selected temperature. When the indicator light switches off, the food should be placed in ...

Page 7 - Turbo grilling

7 Baking guide • Thermofan baking is done with the oven trays in position. • For small items the entire area of each tray may be utilised. Larger items should be placed towards the front of each tray. • All ovens extract a certain amount of moisture from the food being cooked. The much greater capac...

Page 8 - The oven door must remain closed when grilling.; Safety advice

8 • The warming drawer has a variable temperature control. This allows the correct setting for the application. An indicator light will glow when the drawer has been switched on. • If food is to be kept warm for a lengthy period it is best to select a lower temperature. • Food left for too long in t...

Page 9 - Solid plates

9 Red dot plates • Plates featuring a red dot in the centre are high speed, wattage plates for increased • For your safety these plates are fitted with thermal Should a plate be accidentally switched on and left the limiter will reduce the power output of the plate and mise the risk of overheating a...

Page 10 - Ceran smooth top; Plate controls; Recommendations ( see also the enclosed ‘CERAN’ leaflet )

10 Ceran smooth top R WARNING In the unlikely event of sustaining accidental damage and cracking, switch off the appliance at the mains to avoid electric shock and have the panel replaced before further use. Plate controls • Select the heat level by turning the relevant plate control knob to the req...

Page 11 - Maintenance; Remo ving the inner do o r glass; “T HIS SIDE T OWARDS OVEN”.; Remo ving the side racks and shel ves; Remove the bo ttom bak e element gu ard.

11 Maintenance Remo ving the inner do o r glass . • T he glass may be removed for clean in g pur -poses by remo v in g the two scr ews wh ich ho ld it in place. • It is now po ss ib le to clean the ins ide of the outer glass if requ ired. • Wash the glass in hot so apy water, rinse an d dry. • Re-as...

Page 13 - Cleaning materials; DO USE; Care guide for stainless steel; ALWAYS WIPE

13 Stainless steel is not adversely affected by normal household use but because of it’s reputation for durability, it is sometimes assumed to be indestructible, and therefore sub- jected to misuse or even abuse. Care should be taken to avoid such ‘abnormal use’. Cleaning materials DO USE • A soft c...

Page 15 - the fault is due to or caused by any of the above.; Problem check

15 Before calling a service technician to assist with a problem, PLEASE CHECK Remember that you may be charged for a service call even during the warranty period if the fault is due to or caused by any of the above. Problem check Since the following are not factory faults, they are the owner’s respo...