Definitive Technology UIW RCS II - Manuals

Page 3 - Please Inspect For Shipping Damage; Unpacking Your UIW RCS II Loudspeakers

Please Inspect For Shipping Damage Each loudspeaker leaves our plant in perfect condition. Any visible or concealed damage most likely will have occurred in handling after it left theplant and should be reported at once to your Definitive dealer or the deliverycompany that delivered your loudspeaker...

Page 4 - Painting Your UIW RCS II Loudspeakers; • The UIW RCS II is designed for mounting inline or at 90 degrees; Installation Procedure Overview

The UIW RCS II Loudspeakers are easily paintable and are shipped withplastic paint masks (which should be retained even if you initially decide notto paint the speakers). The grille and frame must be painted separately, andfor best results, prior to installation. For the grille, spray painting is th...

Page 5 - Mounting options overview

5 • The speaker enclosure needs to be against joists or framing material on the 2 parallel sides that are to be fastened with the screws. • The clearance required on outside ceiling surface is 1" around the cutout to clear the speaker bezel. On inside surface, 1 1 / 4 " of clearance is requi...

Page 6 - Hole location options and requirements

6 Step-by-Step Installation (continued) Hole location options and requirements • Mounting in ceiling with joists 16" on-center. – Place template against inside edge of joist. – Trace around template with pencil. – Cut hole. See Diagram 1, page 9 for reference. • Mounting in ceiling with joists w...

Page 8 - supporting the speaker. The screws going through the speaker and

• As a minimum, the speaker must be secured using four screws provided on 2 parallel sides. See Diagrams 1 and 2, page 9 for reference. • If speaker is mounted against a crossbeam, install two additional #8 x 3 1 / 2 " wood screws (not included) into side that is against crossbeam to securespeak...

Page 9 - Diagram 1

9 NOTE: UNIT DOES NOT NEED TO BE CENTERED BETWEEN JOISTS. ALLOW FOR 1-1/4” OF CLEARANCE ON EACH SIDE OF CLEAR LOCK ARMS EXISTING CEILING JOISTS 24” ON-CENTER ADDED FRAMING MATERIAL 14-1/2” CAVITY SIZE REQUIRED BETWEEN INSTALLED FRAMING MATERIAL WOODSCREW (4 PLACES) LOCK ARM (6 PLACES) 14-3/8” TEMPLA...

Page 10 - Troubleshooting Your UIW RCS II Speakers; Diagram 3

If you experience any difficulties with your UIW RCS II Loudspeakers, try the suggestions described below. If you are still having problems, pleaseconsult your Definitive Technology authorized dealer for assistance. • Make sure all your system interconnections and power cords are solidly in their pl...

Page 11 - UIW RCS II; Recommended Amplification:; Please note that the address given in this booklet; Service

It is our pleasure to offer assistance if you have any further questions or comments. Please feel free to contact our technical support staff at Definitive Technology, LLP, 11433 Cronridge Dr., Suite K, Owings Mills,MD 21117 or call (410) 363-7148. Technical Assistance UIW RCS II Specifications UIW ...

Page 12 - This product complies with the essential requirements of; -Years for Electronic Components

This product complies with the essential requirements of EMC directives 89/336/EEC and 73/23/EEC (inclusive of 93/68/EEC) and carries the CE mark accordingly. DSAT013009 Definitive Technology warrants to the original retail purchaser only that this Definitive Technology Loudspeaker Product (the “Pro...