Page 2 - Connecting Your Loudspeakers; amplifier or get a bigger one.; Repeat Steps 1 and 2 for the right channel.
It is critical for proper performance that both speakers (left and right) be connect- ed in proper phase. Note that one terminal on each speaker (the +) is colored red andthe other (the -) is colored black. Please make certain that you connect the red (+)terminal on each speaker to the red (+) termi...
Page 3 - Repeat steps 4 & 5 for the right ProMonitor.; For Dolby ProLogic Systems
6. Repeat steps 4 & 5 for the right ProMonitor. 7. Set the low frequency filter control on the back of the ProSub to the setting describedin a ProSub Owner’s Manual. Please note that the exact frequency will depend on many factors including specific positions of the speakers in the room, so you ...
Page 4 - Variation on the Optional Hook-up; In addition, this variation is also one which can be used if
4 Set the bass management settings of your receiver or decoder (see your receiv- er or decoder manual) for “Small” left front (main), right front (main), centerfront, left rear (surround) and right rear (surround) to “Small,” and Subwoofer to“Yes.” If your receiver/decoder allows you to choose the c...
Page 5 - Your ProMonitors should sound good right out of the box however, an; Positioning the ProMonitor in Your Room
Using ProMonitors with a ProSub for RearChannel Surround Use Since Dolby Digital is capable of delivering a full-range bass signal to the rear channels, some more elaborate systems will include an additional ProSub for the rear channels. In this case, simply wire the ProMonitors to the ProSub asdesc...
Page 6 - Wall Mounting the ProMonitors; Please; Technical Assistance; and learn about all our exciting products.
The ProMonitors can be wall-mounted using the optional ProMount 80, which should be available from your Definitive dealer. Your ProMonitor also has a built-inkeyhole wall-mount on the back. Use toggle bolts or other similar anchored fasten-ers to fasten the ProMount 80 to the wall or to hold the key...
Page 7 - ProMonitor 800 Specifications; coupled to a 4; ProMonitor 1000 Specifications; coupled to a 5; Specifications
7 ProMonitor 800 Specifications Dimensions: 8 3 / 8 " H x 5 " D x 14 3 / 4 " W Weight: 4 lbs. each Frequency Response: 57 Hz – 30 kHz Efficiency: 89 db Nominal Impedance: 4 – 8 ohms Driver Complement: One 4 1 / 2 " cast basket bass/midrange driver coupled to a 4 1 / 2 " pressure-...
Page 8 - This product complies with the essential requirements of; -Years for Electronic Components
CTAT012909 This product complies with the essential requirements of EMC directives 89/336/EEC and 73/23/EEC (inclusive of 93/68/EEC) and carries the CE mark accordingly. Definitive Technology warrants to the original retail purchaser only that this Definitive Technology Loudspeaker Product (the “Pro...
