Definitive Technology IWSUB1010 (UCYA) - Manuals

6. Once you have cut the hole, fish your previously positioned wiring out of the hole and connect your speaker. See the next section for detailedhookup instructions. Make certain that you connect the wire from the red terminal (+) of your SubAmp 600 to the red terminal (+) on yourspeaker and the wir...

Hookup Method Two RCA from Receiver To Subwoofer Hookup Method One RCA from Receiver To Subwoofer Hookup Method Two 1. Use a Low (Line) Level RCA connection from your receiver’s L and R Line Level Outputs in to the L and R Input of the SubAmp 600. This connection is “summed” within the SubAmp 600. 2...

8 Hookup Method Three To Subwoofer From Receiver To Speakers 4. The SubAmp 600 features an Adjustable Crossover setting on its front panel. This setting will work with this connection, giving you extra controlover your subwoofer settings. Making Adjustments to Your SubAmp 600 The rear panel of your ...

tend to add more “warmth” to the bass and lower midrange, possibly at the sacri-fice of bass “tightness” and midrange clarity. Turning the setting down from therecommended setting will make the bass and lower midrange sound “leaner.” Phase Adjustment Adjusting the Phase can be a little tricky. If yo...

11 Painting the Grille: 1. The grille of the IWSub 10/10 features an even, protective powder coating. This powder coating is an ideal primer. 2. Grilles must be spray painted. Do not use a brush and paint. Thick, brushed paint may clog the grille holes and impair performance. 3. After removing the g...

12 Service Service and warranty work on your Definitive Technology audio equipment willbe performed by your authorized Definitive Technology dealer. If, however, youwish to return your equipment directly to us, please contact us first to describethe problem you may be having and to allow us to give ...

Visit us at www.definitivetech.com and learn about all our exciting products. IWSub 10/10 Outer Dimensions: 15 1 / 2 " W x 21" H Cut-out Size: 14 3 / 8 " W x 19 7 / 8 " H Rec. Assoc. Amp: SubAmp 600 Frequency Response: 16 Hz – 200 Hz Nominal Impedance: 4 ohms Driver Complement: One 1...

This product complies with the essential requirements of EMC directives 89/336/EEC and 73/23/EEC (inclusive of 93/68/EEC) and carries the CE mark accordingly. CYAT013009 Definitive Technology warrants to the original retail purchaser only that this Definitive Technology Loudspeaker Product (the “Pro...