Definitive Technology BP7002 - Manuals

Page 2 - CAUTION; Safety Precautions; CAUTION: Important Safety Instructions

CAUTION! To reduce the risk of electric shock and fire, do not remove the cover or back plate of thisdevice. There are no user serviceable parts inside. Please refer all servicing to licensed service technicians.Avis: Risque de choc electricque, ne pas ouvrir. CAUTION! The international symbol of a ...

Page 3 - AVERTISSEMENT: Mesures de Sécurité Importantes; Remember, whatever sounds best to you is correct.; Please Inspect For Shipping Damage; place on your warranty card, answer all questions and send it in.; Positioning the Speakers in Your Room

3 Instructions: 1. Carefully lay the speaker on its front surface.2. Place one of the stabilizer brackets in the rear slot provided. (Note: Stabilizer bracket will be flush with bottom of base.) 3. Insert two screws provided and tighten them securely, being careful not to strip out material.4. Repea...

Page 4 - “Spiking” Your Loudspeakers

4 In most rooms the speakers should be placed 5 to 36 inches from the rear wall in order to allow the rear radiated sound to freely reflect off the back wall. Please note that they can go closer to, or further from, the wall if desired. Placement closer to the rear wall will increase the bass output...

Page 5 - Connecting Your Loudspeakers

Your BP7002/BP7004/BP7006s have a set of speaker level (high level) 5-way binding posts and in addition, each speaker has an LFE input. This input can be used with Dolby Digital* and DTS* 5.1 (6.1, 7.1) decoders to separately feed the discrete “Low Frequency Effects” channel into each subwoofer (whi...

Page 7 - level control set at approximately 12 o’clock.; Powering Up the Active Subwoofer Section; this almost always sounds the best.

7 Your BP7002/BP7004/BP7006s contain a built-in, active powered subwoofer section as well as an electronic crossover and so each BP7002/BP7004/BP7006 must be plugged into an electrical socket of the appropriate voltage (as indicated on the back of your unit) using the plug on the end of the black co...

Page 8 - sound effects as you require.; VERY IMPORTANT: Setting Channel Balance

We suggest that when you are using a separate LFE input, you set the bass level on your BP7002/BP7004/BP7006s to sound balanced when listening to music in stereo and use the .1 channel or bass level control in your Dolby Digital channel balancing procedure on your decoder to raise or lower the bass ...

Page 10 - Definitive Technology Offices; Service

Visit us at www.definitivetech.com. Service and warranty work on your Definitive loudspeakers will normally be performed by your local Definitive Technology dealer. If, however, you wish to return the speaker to us, please contact us first, describing the problem and requesting authorization as well...

Page 11 - Technical Assistance; Specifications

It is our pleasure to offer assistance if you have any questions regarding your BP7002/BP7004/BP7006s or their set-up. Please contact your nearest Definitive Technology dealer or contact us directly at 410-363-7148. Technical Assistance BP7002 Dimensions: 7.25"W x 16"D x 46.25"H Frequenc...

Page 12 - Limited USA Warranty:; This product complies with the essential

Definitive Technology warrants to the original retail purchaser only that this Definitive Technology Loudspeaker Product (the “Product”) will be free from defects in materials and workmanship for a period of five (5) years covering the drivers and cabinets, and three (3) years for the electronic com...