Danby 820HD - Manuals - manualsarea.com

Page 2 - WARNING; CAUTION; IMPORTANT SAFETY INSTRUCTIONS; HD RadioTM Technology Manufactured Under License From

WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSIONCORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTEDTO PREVENT BLADE EXPOSURE TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN ORMOISTURE. The lightning flash with arrowhead symbol...

Page 4 - Setup; FIRMLY push the

12VDC OUT OPT DIGITAL OUT 2) Refer to the Antenna Connection leaflet. Choose and connect an FM Antenna. Position the FM antenna. Connect and position the AM antenna. Setup 1) Locate and remove the Antenna Pack and the Whip Antenna from the carton. Remove the Antenna Connection leaflet, the AM antenn...

Page 6 - Radio Operation; Buttons; Preset Button Assignment

-4- 3) If desired, store ten radio stations (either AM or FM) for immediate recall. While tuned to the station, press and hold down a PRESET button on the remote control for at least two seconds. The display will confirm the sta- tion is stored. 2) Tune stations using TUNE or SEEK (faceplate or remo...

Page 7 - FAVORITE Organizer Band Operation; Presets; Selecting; Indicates the FAVORITE; Confirmation

-5- 2) Besides your PRESET selections, you can assign up to twenty additional AM and FM stations as Favor- ites. Tune to a station that isn't already assigned to a Preset button, then press and hold the FAVORITE button (front panel or remote) for over two sec- onds. The display confirms Favorite ass...

Page 8 - Receiving HD RadioTM broadcasts; Technical Information; ANALOG ONLY MODE

-6- Receiving HD Radio™ broadcasts : A broadcast with an HD Radio™ digital signal does not immediately start to play when you tune to the station's frequency. The receiver builds up a reserve of digital infor-mation before it starts playing the audio. This digital signal reserve insures the audio pr...

Page 10 - Faceplate

FAVORITE FM AM AUX SEEK FAVORITE JOG TUNING SOURCE Push repeatedly to select the FM, AM or Favorite bands or the Aux input. TUNING If the AM or FM band is selected, adjust this knob to tune the radio frequency or to the next stream within an HD Radio multicast. If the Favorite band is selected, adju...

Page 11 - Remote Control; The designated buttons

JOG [see page 10 for complete menu listings] Press quickly to enter the adjustment mode for the primary radio settings. Press and hold to enter the adjustment mode of the secondary radio settings.Alternate between the Volume control and the JOG button for adjustments. POWER/SLEEP Press and quickly r...

Page 12 - Additional Information; brief; mutes the speakers

1) Audio Display: This feature displays a radio broadcast's audio spectrum. It shows the intensity of the audio at ten different frequency bands. Once engaged, the Audio Display becomes the default screen. Any control action will replace the Audio Display until five seconds after the last control in...

Page 13 - Alarm Features; ACTIVATION; music wakeup; Additional Information Continued; OPT DIGITAL OUT

Alarm Features The SoundWorks Radio 820HD has two independent wakeup alarms. ACTIVATION Each alarm can be set to Wake To Music or Wake to Tone (a beep sound) using the Alarm 1 and Alarm 2 buttons. RESET Once either alarm activates, reset the alarm by pressing either the Alarm 1 button, the Alarm 2 b...

Page 14 - Wakeup Settings Adjustment; Press and hold down either Alarm button for two

3) Tap the Alarm button again to move to the MINUTES adjustment display. 2) Adjust VOLUME to select the desired hour. 2 sec Alarm Operation 1 - Wakeup Settings Adjustment HOUR adjustment HOUR change MINUTESadjustment FAVORITE FM AM AUX JOG 1) Press and hold down either Alarm button for two seconds. ...

Page 16 - adjustment; Tap the Alarm button again to move to the FREQUENCY

8) Adjust VOLUME to select the desired wakeup volume. 7) Tap the Alarm button again to move to the WAKEUP VOLUME adjustment display. WAKEUP VOLUME adjustment WAKEUP VOLUME change 5) Tap the Alarm button again to move to the FREQUENCY adjustment display. FREQUENCYadjustment 6) Adjust VOLUME to select...

Page 17 - Daily Alarm Options

9) Tap the Alarm button again to move to the DAILY PATTERN adjustment display. DAILY PATTERN adjustment 10) Adjust VOLUME to select the desired daily alarm repetition. DAILY PATTERN change 11) Tap the Alarm button again to complete the alarm adjustment session. NORMAL DISPLAY Daily Alarm Options Dai...

Page 18 - Alarm Activation; first tap

3) Once you see the desired Alarm Activation mode on the display, wait five seconds. The radio will store your request and return the radio to normal operation. 2) While the display is visible, continue to use the Alarm button to choose between Music Wakeup alarm, Tone Wakeup alarm and NO alarm. Ala...

Page 19 - Alarm Reset and Snooze

-17- RESET Once either alarm activates, reset the alarm by press- ing either the Alarm 1 button, the Alarm 2 button or Power . SNOOZE The Snooze bar silences the wakeup alarm for a user- determined interval. The wakeup alarm reactivates after the snooze interval. Alarm Operation 2 - Alarm Reset and ...

Page 20 - English