Daewoo Section 9P - Manuals

Daewoo Section 9P – Manual in PDF format online.

Manuals:

Manual

Manual Daewoo Section 9P

Summary

Page 2 - DESCRIPTION AND OPERATION; DOOR LOCK STRIKER

9P – 2 DOORS DAEWOO M-150 BL2 DESCRIPTION AND OPERATION DOOR LOCK STRIKER The front and the rear door lock strikers each consist ofa striker with two screws threaded into a floating cageplate in the B-pillars and C-pillars. The door is secured inthe closed position when the door lock fork snaps over...

Page 3 - COMPONENT LOCATOR; FRONT DOOR

DOORS 9P – 3 DAEWOO M-150 BL2 COMPONENT LOCATOR FRONT DOOR D19C403A

Page 5 - REAR DOOR

Page 7 - FRONT DOOR GLASS RUN; Removal Procedure

DOORS 9P – 7 DAEWOO M-150 BL2 REPAIR INSTRUCTIONS ON–VEHICLE SERVICE D109E521 FRONT DOOR GLASS RUN Removal Procedure 1. Remove the front door seal trim from the front door. Refer to “Door Seal Trim” in this section. 2. Remove the outside rearview mirror from the front door. Refer to Section 9L, Glas...

Page 8 - REAR DOOR GLASS RUN

9P – 8 DOORS DAEWOO M-150 BL2 D109C566 REAR DOOR GLASS RUN Removal Procedure 1. Remove the inside channel weatherstrip from the rear door. Refer to Section 9G, Interior Trim. 2. Remove the outside channel weatherstrip from the rear doors. Refer to Section 9G, Interior Trim. 3. Remove the rear door t...

Page 9 - TAILGATE LOCK STRIKER; Installation Procedure

DOORS 9P – 9 DAEWOO M-150 BL2 D109C570 DOOR LOCK STRIKER Removal Procedure 1. Remove the door lock striker. D Remove the screws (1). D Remove the door lock striker (2). D109C571 Installation Procedure Notice: Dissimilar metals in direct contact with eachother may corrode rapidly. Make sure to use th...

Page 10 - DOOR LOCK STRIKER ADJUSTMENT

9P – 10 DOORS DAEWOO M-150 BL2 D109C574 DOOR LOCK STRIKER ADJUSTMENT Notice: The door lock striker is an important attachingpart that can affect the performance of vital componentsand systems and can cause major repair expenses. Ifreplacement becomes necessary, the door lock strikermust be replaced ...

Page 13 - Up and Down Adjustment; FRONT DOOR LOCK

DOORS 9P – 13 DAEWOO M-150 BL2 D19C580A Up and Down Adjustment 1. The tailgate must be properly aligned. 2. Close the tailgate until the lock fork contacts the strik- er. 3. Stand next to the tailgate opening and move the tail- gate slowly up and down, just touching the strikereach time. D109C581 4....

Page 14 - CHILDPROOF REAR DOOR LOCK

9P – 14 DOORS DAEWOO M-150 BL2 D109C584 4. Remove the front door lock. D Remove the screws (1). D Remove the front door lock (2). Important: Disconnect the actuator connector, ifequipped with the central door lock system. D109C585 Installation Procedure Notice: Dissimilar metals in direct contact wi...

Page 16 - CENTRAL DOOR LOCK ACTUATOR; TAILGATE LOCK

9P – 16 DOORS DAEWOO M-150 BL2 D109C588 CENTRAL DOOR LOCK ACTUATOR Removal Procedure 1. Disconnect the negative battery cable. 2. Remove the door seal trim. Refer to “Door Seal Trim” in this section. 3. Remove the door lock assembly. Refer to “Door Lock” in this section. 4. Remove the actuator from ...

Page 17 - INSIDE DOOR HANDLE; OUTSIDE FRONT DOOR HANDLE

DOORS 9P – 17 DAEWOO M-150 BL2 D109C592 Installation Procedure 1. Install the tailgate lock with the screws. 2. Install the lock rod to the tailgate lock cylinder. 3. Install the tailgate trim panel. Refer to Section 9G, In- terior Trim. D109C593 INSIDE DOOR HANDLE Removal Procedure 1. Removal the i...

Page 18 - OUTSIDE REAR DOOR HANDLE; DOOR LOCK CYLINDER

9P – 18 DOORS DAEWOO M-150 BL2 D109C596 Installation Procedure 1. Install the outside front door lock handle with the bolts. 2. Install the front door lock rods. 3. Connect the negative battery cable. D109C597 OUTSIDE REAR DOOR HANDLE Removal Procedure 1. Disconnect the negative battery cable. 2. Re...

Page 19 - MANUAL WINDOW REGULATOR

DOORS 9P – 19 DAEWOO M-150 BL2 D109C600 Installation Procedure 1. Install the door lock cylinder with the clip. 2. Install the outside door handle. Refer to “Outside Front Door Handle” in this section. 3. Connect the negative battery cable. D109C601 MANUAL WINDOW REGULATOR Removal Procedure 1. Remov...

Page 20 - FRONT DOOR ASSEMBLY

9P – 20 DOORS DAEWOO M-150 BL2 D109C604 4. Remove the window motor from the window regula- tor. D Remove the screws (1). D Remove the window regulator (2). Caution: Be careful what you are doing when sepa-rating the window motor and the window regulator.You may be hurt. D109C605 Installation Procedu...

Page 21 - REAR DOOR ASSEMBLY

DOORS 9P – 21 DAEWOO M-150 BL2 D19C608A Installation Procedure Notice: Dissimilar metals in direct contact with eachother may corrode rapidly. Make sure to use the correctfastener to prevent premature corrosion. 1. Connect the body–to–door rubber grommet. 2. With the aid of another technician, light...

Page 22 - TAILGATE

9P – 22 DOORS DAEWOO M-150 BL2 D19C611A Installation Procedure Notice: Dissimilar metals in direct contact with eachother may corrode rapidly. Make sure to use the correctfastener to prevent premature corrosion.1.Connect the body–to–door rubber grommet.2. With the aid of another technician, lightly ...

Page 23 - TAILGATE LOCK CYLINDER; DOOR HINGE

DOORS 9P – 23 DAEWOO M-150 BL2 D19C614A Installation Procedure Notice: Dissimilar metals in direct contact with eachother may corrode rapidly. Make sure to use the correctfastener to prevent premature corrosion.1. Connect the body–to–tailgate rubber grommet.2. With the aid of another technician, lig...

Page 24 - DOOR HOLD OPEN LINK

9P – 24 DOORS DAEWOO M-150 BL2 D109C616 Installation Procedure Notice: Dissimilar metals in direct contact with eachother may corrode rapidly. Make sure to use the correctfastener to prevent premature corrosion. 1. With the aid of another technician, install the hinge to the door and the body with t...

Page 26 - DOOR WEATHERSTRIP

9P – 26 DOORS DAEWOO M-150 BL2 D109C624 Installation Procedure 1. Press the outside channel weatherstrip onto the door. 2. Install the weatherstrip screw. D109C625 DOOR WEATHERSTRIP Removal Procedure 1. Remove the door hold open link bolt. D109C626 2. Remove the door weatherstrip. D Remove the clip ...

Page 27 - DOOR SEAL TRIM; DOOR OPENING WEATHERSTRIP

DOORS 9P – 27 DAEWOO M-150 BL2 D109C566 DOOR SEAL TRIM Removal Procedure 1. Remove the door trim panel. Refer to Section 9G, In- terior Trim. 2. Remove the door seal trim. a. Door seal trim. b. Door pocket handle bracket. Important: In case of the deluxe trim, remove the doorpocket handle bracket in...

Page 28 - TAILGATE STRUT

9P – 28 DOORS DAEWOO M-150 BL2 D109C631 Installation Procedure 1. Install the door opening weatherstrip to match the marking. 2. Install the rocker panel trim and the lower B–pillar panel trim. D109E543 MANUAL WINDOW REGULATORHANDLE Removal Procedure 1. Remove the window regulator handle. D Using a ...

Page 30 - SCHEMATIC AND ROUTING DIAGRAMS; POWER DOOR LOCKS

9P – 30 DOORS DAEWOO M-150 BL2 SCHEMATIC AND ROUTING DIAGRAMS POWER DOOR LOCKS (LEFT–HAND DRIVE) D19C201B