Daewoo L710T - Manuals - manualsarea.com

Page 4 - TV mode

Important Safeguards ………………………………………………………………………………... 1 Supplied Accessories ………………………………………………………………………………… 2 Functional Overview …………………………………………………………………………………. … Connecting & powering up ……………………………………………………………………….. … Connecting the LCD TV monitor ………………………………………………………………… 3 4 5 Preparatio...

Page 5 - EN55024 - Immunity Test for ITE Product

Location Heat, Moisture, Dust, Vibration Position your LCD TV so that bright light or sunlight doesn’t fall directly onto the screen. Care should be taken not to expose the set to any unnecessary vibration, moisture, dust or heat. Do not expose the set to dripping or splashing. Ventilation Also ensu...

Page 9 - Connecting the LCD TV

Connecting the LCD TV Aerial connection Connect an Aerial cable (75ohm coaxial cable) to the Aerial Terminal on the back of the LCD TV connection panel. 5

Page 11 - FRONT CONTROL PANEL; To select MENU press the MENU button.

Operation & Adjustment (Front Control Panel) 1 Power on / off Switches the LCD TV on and off (Standby mode) 2 Power indicator light Shows Green LED when in use 3 Volume adjust Adjusts volume up and after pressing MENU, adjusts menu settings 4 Volume adjust Adjusts volume down and after pressing ...

Page 12 - Connecting external equipment

Connecting external equipment Plug the connector for S-Video port [1] on the rear of the LCD TV and the other end into the device you are intending to connect (VCR, DVD etc.) Plug the Phono connectors for the Composite video / Sound inputs to the RCA ports [2] on the rear of the LCD TV and the other...

Page 13 - Menu Installation; OK button

Menu Installation Key Process for TV mode Press the MENU button on the Remote controller. This will bring up the OSD. Here, with INSTALL highlighted, you can make the changes necessary to configure the TV options available such as searching for channels, tuning channels, naming channels and editing ...

Page 14 - OK

Menu Installation Key Process for TV mode Edit Channel To attach the names to each channel number and put them in the correct order, conduct the following procedure:- Press the MENU button and then press arrow-right (VOL+) once and then the down-PR button to select EDIT CHANNEL. Now press the OK but...

Page 15 - RED, then again to select correct Country

Menu Installation Key Process for TV mode Manual Tuning To select manual tuning, press MENU, then VOL+, then down-PR, then OK. At this position set the SYSTEM to match country you are in. 1. press right-hand (VOL+), the Country will change RED, then again to select correct Country 2. press MENU to s...

Page 18 - Menu installation

Menu installation Key Process for PC mode Press the MENU button on the Remote controller. This will bring up the OSD. COLOUR configures the PC display to suite your requirements. GAMMA reflects the level of white against black and COLOUR TEMP is depedant on the amount of RGB (Red Green, Blue). 9300 ...

Page 20 - Attaching a Wall or Arm mounting device

Attaching a Wall or Arm mounting device 1. Turn off the monitor and pull out the power cable. 2. Place the product on top of a soft cloth or other smooth material on the floor and move the LCD TV to a ‘face-down’ position making sure it is flat and balanced. 3. Detach the rear cover of the stand wit...