Daewoo DWF-6010 - Manuals

* Before plugging the plug into wall receptacle, check the voltage rating isin the range of rating, marked on thelabel at the back side of your washer. Power Supply LABEL 5 Grounding • If your water tap or water pipe is not made of metal, connectthe ground wire to a copperplate or a metal rod and bu...

6 Be careful not to confuse hot water inlet (pink color) and cold water inlet (blue color), if your washer is provided with dual water inlets. Also if you have only one water tap, connect the inlet hose with cold water inlet (blue color). * In case that your washer is not provided with collar compar...

7 ; ; ; DRAIN HOSE SETTING Before operating your washer, install drain hose properly. First, connect the drain hose to the drain outlet at therear side of your washer, and then fasten it tightly withthe hose clamp. Next, the other end of drain hose set as the below. ! In case that it goes over adoor...

HOW TO OPERATE 8 • Close zippers, snaps, and hooks to avoid snagging other items.Remove pins, buckles, and other hardobjects to avoid scratching the washerinterior. • Empty pockets and turn them inside out. • Turn down cuffs and turn synthetic knits out to avoid pilling. • Tie strings and sashes so ...

Power Switch Press this button to turn the power ON or OFF. Water Level Selector This button is used to select the water level you want. Reservation Button If you want to reserve the finishing time of washing, use this button. As this button is pressed, digit in display increases by 1 hour at one pr...

1 1 1. Add measured detergent to the washer, (Follow manufacturer’s directions for safe use)2. OPTIONAL STEP If desired, add measured liquid chlorine bleach to the bleach inlet. use only liquid chlorine inthe bleach inlet* Follow manufacturer’s direction for safe use. 3. OPTIONAL STEP If desired, ad...

1 2 • This course is a washing method for the general clothes except the extraordinary clothes such as blanket, wool, etc Fuzzy Course ! Put in the clothes @ Press the power switch. # Press the Start/Holdbutton, and close the lid. POWER START/ HOLD • This course is effective for the washing of light...

1 3 # Select the waterlevel proper to thewash load. $ Press theStart/Hold button,and close the lid. % Put the clothes intothe tub after thebuzzer sounds. ^ Press theStart/Hold button,and close the lid. WATERLEVER HIGH MID LOW START/ HOLD START/ HOLD ! Press the powerswitch. @ Press the courseselecti...

For the reservation of finishing time ! Set your program as theabove procedure,remaining last step. * Press the course selection button.* Press the procedure selection button.* But wool/suit course can not reservation. @ Press reservation button untilthe digital monitor displays thefinishing time yo...

1 5 Proper care of your washer can extend its life. This section explains how to care for your washerproperly and safely. Cleaning your washer Winter storage or moving care Install and store your washer where it will not freeze. Because some water may stay in thehoses, freezing can damage your washe...

1 6 Cleaning the Lint Filter Cleaning the water inlet filter • Clean the filter when water leaks from, the water inlet. Cleaning the drain filter • In case “U” shape drain hose, this filter’s equipped at the cack side of washer.• This drain filter is to screen the foreign stuffs such as threads, coi...

Stained, heavily-soiled, or greasy items may need to be prewashed or soaked for best results. Soakinghelps remove protein-type stains like blood, milk, or grass. Prewashing helps loosen soil before washing. Stain removal rules • Use warm water for soaking or prewashing stained laundry. Hot water can...

TROUBLE SHOOTING GUIDES Most problems are easily solved if you understand the cause. Check the following list for problembefor calling for service. Before calling for service, check these 1 8 • The washer will not spin; • The washer will not operate at all. R NOTE! R Please check the point before ca...