Page 2 - PARTS AND FEATURES; Accessories
2 PARTS AND FEATURES The parts and features of your washer are illustrated on the page.Become familiar with all parts and features before using your washer. NOTEThe drawings in the book may vary from your washer model.They are designed to show the different features of all models coverd by this book...
Page 3 - WASHER SAFETY
3 Save these instructions Your safety is important to us.To reduce the risk of fire, electrical shock, or injury when using your washer adhere to thefollowing basic precautions. Understanding your responsibilities • Do not use chlorine bleach and ammonia or acid(such as vinegar or rust remover) in t...
Page 4 - INSTALLATION INSTRUCTIONS
4 Removing transit bolts 1. Before operating the washer, remove the transit bolts(4ea) along with the rubber. • If the bolts are not removed, it may cause heavy vibration, noise and malfunction. 2. Unscrew the 4 bolts with the spanner supplied. Keep the 4 bolts and spanner forfuture use. • Whenever ...
Page 5 - For Ordinary Tap; INLET HOSE CONNECTION
5 The washer should be connected to the water mains using new hose sets and old hose setsshould not be reused.In using only one water tap or in case of only one water inlet valve, connect the inlet hose to thecold water inlet valve.Option : Be careful not to confuse hot water inlet and cold water in...
Page 6 - ELECTRICAL REQUIREMENTS; Drain system; Level adjustment
6 ELECTRICAL REQUIREMENTS • Electrical earth is required on this washer• If it does not fit the outlet, have a proper outlet installed by a qualified electrician. • Don’t earth to a gas pipe.• Don’t change the power supply cord plug.• Check with a qualified electrician if you are not sure the washer...
Page 7 - OPERATING YOUR WASHER
7 OPERATING YOUR WASHER 2 Adjust the level of washer using adjustable legs. • Please check if there is any gap between the four adjustable legs and the floor. • Turning adjustable legs by the enclosed spanner, adjust the level of washer and makeit sure that there is no swaying of washer. • After the...
Page 9 - THE FUNCTION OF CONTROL PANEL
9 Press this switch to turn the power 'ON' or 'OFF'. Operation and temporary stop is repeated as it is pressed. When you want to change program inoperating; Press the 'Start/Pause' button → Select the program that you want to change → Press the 'Start/Pause' button again. You can select the course y...
Page 10 - WASHING PROGRAM
10 WASHING PROGRAM Program Normal White Eco-White Synthetic Heavy Stain Wool Delicate Blanket Rapid Memory Drum Cleaning Fabric type Colorfast garments (shirts, night dresses, pajamas,..) and lightlysoiled white cottons(underwares,..) First check whether laundry is machine washable. (white cotton,li...
Page 11 - WASHING PROCEDURE AND SELECTION
11 1. NORMAL PROGRAM Note • If you want to change the setting program during operation, press the 'Start/Pause' button to hold the operation and change the program you want to change by pressing each corresponding button. • Water temperature '95°C' is not selected in order to prevent clothes from da...
Page 22 - GUIDE FOR OTHER USEFUL PROGRAMS
22 GUIDE FOR OTHER USEFUL PROGRAMS * DELAY START(RESERVED WASHING) Note • If you want to check the selected program, press the 'Start/Pause' button again.• Preparing washing before starting 'Time Delay'; - Turn on the water tap.- Load laundry and close Door.- Place the detergent and fabric softner i...
Page 25 - MAINTENANCE; Cleaning your washer
25 MAINTENANCE Proper care of your washer can extend its life. This section explains how to care for your washerproperly and safely. Cleaning your washer Winter storage or moving care Install and store your washer where it will not freeze. Because some water may stay in thehoses, freezing can damage...
Page 26 - HOW TO CLEAN THE FILTER; Cleaning the water inlet filter; Cleaning the detergent case
26 HOW TO CLEAN THE FILTER Cleaning the water inlet filter • Clean the filter when water leaks from the water inlet. Cleaning the drain filter • This drain filter is used to screen the foreign stuffs such as threads, coins, pins, buttons etc..• If the drain filter is not cleaned at proper time(every...
Page 27 - REMOVING STAINS
27 Stained, heavily-soiled, or greasy items may need to be prewashed or soaked for best results.Soaking helps remove protein-type stains like blood, milk or grass. Prewashing helps loosen soilbefore washing. Stain removal rules • Use warm water for soaking or prewashing stained laundry. Hot water ca...
Page 28 - TROUBLE SHOOTING
28 TROUBLE SHOOTING Most problems are easily solved if you understand the cause.Check the following list for problem before calling for service.If the error mode such as IE, OE, UE were displayed on the control part, in order to solve theseproblem, first turn off the power of the washing machine and...
Page 30 - VIIS; ABOUT THIS MANUAL
담 당 김유석님 TEL MODEL C-ED1232EPB BUYER DWC-ED1232_CASTEL_AUSTRALIA_영어 1차 07.9.14 6차 2차 7차 일 정 3차 8차 4차 9차 5차 10차 제 판 인 인쇄 쇄 동 동일 일 규 격 MEMO 연 연락 락처 처 V VIIS SIIO ON N 담 담 당 당 장광세 실장님 TEL: 730-0660 FAX: 730-3788 07.9.14-CASTEL향 C-ED1232EPB의 설명서는 우선 C-ED1211 혹은 D-ED1211의 설명서로 제작, SET 그림과 PANEL 부분은 내수용 모...