Daewoo DSB-122L - Manuals

Daewoo DSB-122L – Manual in PDF format online.

Manuals:

Manual

Manual Daewoo DSB-122L

Summary

Page 2 - SAFETY INSTRUCTIONS; IMPORTANT NOTES

This air conditioner meets strict safety and operatingstandards. The installer of this unit must install or servicethis unit so it operates safely and efficiently. The lightning flash with arrowhead symbol,within an equilateral triangle is intended toalert the user to the presence of uninsulat-ed da...

Page 3 - CONTENTS

CONTENTS 2 It is recommended that you read the Installation and Operating instructions fully before installing and/or operating thisunit. Safety Instructions .................................................................................................................................................

Page 4 - ACCESSORIES SUPPLIED WITH THE UNIT:; BASIC ACCESSORIES

This Installation section explains how and where to connect this new air conditioner. Please read make sure all acces-sories are included as shown below and read manual thoroughly. This Installation section is provided to assist the per-son knowledgeable in air conditioner installation and should no...

Page 5 - OPTIONAL ACCESSORIES; ACCESSORIES NOT SUPPLIED WITH THE UNIT:

OPTIONAL ACCESSORIES 4 1 2 6 3 8 7 5 4 ACCESSORIES NOT SUPPLIED WITH THE UNIT: No. Description Part No. Qty Material Size 1 Drain Hose Extension 3103200200 1 PVC ID19.6 X 2m PVC Pipe 2 Tape 2TQ1008000 1 PVC 80W X 0.1T X 3.5m 3 Copper Tubing Extension 3100002600 1 1/2", 1/4" Copper Tube 4 Ins...

Page 6 - LOCATION OF CONTROLS; INDOOR UNIT; OUTDOOR UNIT

5 LOCATION OF CONTROLS Electrostatic Filter Removes dust particles from the air. Air Cleaning Filters Removes dust andprohibits germs. Emergency/RemoteSwitch Slide to select thedesired position. Indicators Indicate the setting Sensor Wire(DSB-122LH Only) Remote ControllerStorage Deodorizing Filter R...

Page 7 - Remote Control Signal Receiver; Indoor Unit Display

6 INDOOR UNIT ■ Remote Control Signal Receiver This place is the part to receive the signal if it receivethe signal, you can hear the signal “beep”. ■ When the remote controller is lost or out-of-order, push the emergency button(EMERGENCY) to operate by hand. Open the front panel on emergency operat...

Page 8 - REMOTE CONTROLLER; AUTO

7 MODE SLEEP ON/OFF TIMER ENTER/ CANCEL FAN SPEED TURBO/MILD DisplayDisplays informationpertaining to unit. TURBO/MILDPress to be colder the unit. TIMER ENTER/CANCEL ButtonPress to enter a timer setting or to cancel timer setting TIMER ON/OFF ButtonPress to set the unit of or on time.(0.5, 1, 1.5, 2...

Page 9 - REMOTE DISPLAY

8 DSB-122LH MODE SLEEP ON/OFF TIMER ENTER/ CANCEL FAN SPEED TURBO/MILD DisplayDisplays informationpertaining to unit. TURBO/MILDPress to be colder the unit. TIMER ENTER/CANCEL ButtonPress to enter a timer setting or to cancel timer setting TIMER ON/OFF ButtonPress to set the unit of or on time.(0.5,...

Page 10 - OPERATION; CONNECTING THE AC CORD; THREE MINUTE COMPRESSOR DELAY

9 OPERATION 1. Insert the at- tached AC pluginto a pronged220V AC outlet. AC Outletand Plug NOTES: • Never connect the AC line cord plug to other than the specified voltage (220V). • Use the attached power cord only.• The new air conditioner system should be on it’s own 220V circuit. Contact your lo...

Page 11 - CELSIUS TO FAHRENHEIT CONVERSION CHART; HOW TO INSTALL BATTERIES

10 CELSIUS TO FAHRENHEIT CONVERSION CHART CELSIUS FAHRENHEIT 18 64.4 19 66.2 20 68 21 69.8 22 71.6 23 73.4 24 75.2 25 77 CELSIUS FAHRENHEIT 26 78.8 27 80.6 28 82.4 29 84.2 30 86 31 87.8 32 89.6 NOTES: • When operating the remote controller, make sure there are no obstructions between the remote cont...

Page 12 - TO SET AUTO MODE; TO SET QUICK MODE; FAN SPEEDS; TO SET COOL MODE

11 1. Press the ON/OFF button on the remote control to turn the unit on; the On LED will light on the indoorunit and “ON” will light in theremote display. 2. Make sure the AUTO indicator appears in the remote display. Using the TEMP. ▼ or ▲ buttons, set the desired temperature. The desired temperatu...

Page 13 - TO SET FAN ONLY MODE

12 1. Press the ON/OFF button on the remote control to turn the unit on; the On LED will light on the indoorunit and “ON” will light in the remote display. 2. Press the MODE button until the Fan indicator appears in the display. No allowance setting temperature 3. To select a fan speed, press the FA...

Page 14 - TO SELECT THE FAN DIRECTION

13 FAN SPEEDS “AUTO” The fan will automatically select the fanspeed. “ ” The fan will operate on low speed. “ ” The fan will operate on medium speed. “ ” The fan will operate on high speed. “NATURAL” The fan will randomly cycle through the speeds simulating a cool breeze. 1. Press the ON/OFF button ...

Page 15 - TO SET ON TIMER MODE; TO SET OFF TIMER MODE

14 2. While the unit is off, press the TIMER ON button; the display will light waitinginput for the timer, but the actual unitwill not turn on. 3. Repeatedly press the TIMER ON button until the de- sired hour that you want the unit to turn on appearson the display. For example, if it is1:00 P.M. and...

Page 16 - TO SET UNIT TO SLEEP MODE; EMERGENCY OPERATION; TO CANCEL SLEEP MODE:; TO SET TURBO/MILD MODE

15 1. Press the ON/OFF button on the remote control to turn the uniton; the On LED will light on theindoor unit and “ON” will light inthe remote display. 2. Press the MODE button to select the desired mode. Then, set the desiredtemperature using the TEMP. ▲ or ▼ buttons. 3. Press the SLEEP button on...

Page 18 - CARE AND MAINTENANCE; warning

CARE AND MAINTENANCE 17 Clean the casing and front of the indoor unit with a vacuum brush or wipe with a clean damp cloth. • NEVER USE Solvents, harsh chemicals or hot water to clean the unit.• Some metal edges on the unit are sharp. Be careful when cleaning or handling.• Internal parts in the outdo...

Page 19 - TROUBLESHOOTING GUIDE; SYMPTOMS

TROUBLESHOOTING GUIDE 18 Before requesting service, please refer to the chart below for possible solutions: SYMPTOMS POSSIBLE CAUSE POSSIBLE SOLUTIONS No power . Power failure. Restore the power Line voltage too low. Contact electrician to install new outlet. Unit is unplugged or not completely Inse...

Page 20 - SPECIFICATIONS; MODEL

19 SPECIFICATIONS MODEL DSB-122L DSB-122LH Function Cooling Cooling / Heating (Heat pump) Power Supply AC 220-240V, 50Hz Cooling Capacity (Heating Mode) 3,024 Kcal/h 3,150 Kcal/h (3,402 Kcal/h) Operating Current (Heating Mode) 5.7A 7.0 A (6.3 A) Power Consumption (Heating Mode) 1,250W 1,500 W (1,410...